From 8fd12e6b27e713b0b7b24f3f7d9efd57038b1be6 Mon Sep 17 00:00:00 2001 From: Ondrej Filip Date: Wed, 7 Jun 2000 12:35:43 +0000 Subject: OSPF user documentation added. --- doc/bird.sgml | 187 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+) (limited to 'doc') diff --git a/doc/bird.sgml b/doc/bird.sgml index 32c28ea..2bdbed0 100644 --- a/doc/bird.sgml +++ b/doc/bird.sgml @@ -877,6 +877,193 @@ protocol kernel { # Secondary routing table OSPF +Introduction + +

Open Shortest Path First (OSPF) is quite complex interior gateway +protocol. Today's version for IPv4 is 2 and it's defined in RFC 2328. It's based on +link-state of SPF technology. Each router maintains a database +describing the Autonomous System's topology. Each participating router has +has an identical database and all routers run the exact same algorithm +calculatin shortest path tree with themselves as roots, in parallel. +OSPF chooses the least cost path as the best path. In OSPF, the +Autonomous System can be splitted into more areas. Topology +of such area is hidden to the rest of the Autonomous System. This enables +a reduction in routing traffic as well as protection other areas from bad +routing data. Unfortunatelly multiple OSPF areas are not fully supported +in this version of BIRD. Another very important feature of OSPF is that +it can keep routing information from other protocols (like static or BGP) +in it's link-state database as external routes. Each external route can +be tagged by the advertising router, enabling the passing of additional +information between routers on the boundary of the Autonomous System. + +

OSPF quickly detects topological changes in the Autonomous System (such +as router interface failures) and calculates new loop-free routes after a +period of convergence. This period of convergence is short and involves +a minimum of routing traffic. + +

Each router joined in OSPF periodically sends hello messages out +all its interfaces. This allows neighbors to be discovered dynamically. +Then the neighbors exchange theirs parts of database. And keep it +identical flooding updates. Flooding proces is reliable and ensures +that each routes detects the change. + +Configuration + +

+ + +protocol ospf { + rfc1583compat bool; + area { + stub ; + tick ; + interface + { + cost ; + hello ; + retransmit ; + priority ; + wait ; + dead count ; + type [broadcast|nonbroadcast|pointopoint]; + authetication [none|simple]; + password ""; + neighbors { + ; + }; + }; + }; +} + + + + rfc1583compat bool + This option can disable or enable compatibility of routing table + calculation with RFC 1583. Default + value is no. + + area id + This specifies area id of configured OSPF area. It can be written + as a number or as an IPv4 number. The most important area is + the backbone (area id 0) to which every other area must be connected. + + stub bool + No external routes are flooded into stub area. Default value is no. + + tick num + The routing table calculation is not processed when any single + change comes. To lower the CPU utilization it's processed late + in periodical interval. The default value is 7. + + interface interface + This mean that specified interface (or interface pattern) belongs + to actual area. + + cost num + Specifies output cost of interface. Default value is 10. + + hello num + Specifies interval between sending hello messages. Beware, all + router on the same network has to have the same hello interval. + Default value is 10. + + retransmit num + Specifies interval between retransmiting unacknoledged update. + Default value is 5. + + priority num + On every multiple access network (like e.g ethernet) Designed + and Backup Designed router is elected. These routers have some + special functions in flooding process. Higher priority rices + preferences in elections. Routers with priority 0 are not + eligible. Default value is 1. + + wait num + After start, router waits specified interval between starting + election and building adjacency. Default value is 40. + + dead count num + When router does not receive any message from neighbor in + * seconds, it will declare neighbor down. + + type broadcast + BIRD detects a type of connected network. However, sometimes is + necessary to change it. On broadcast networks are flooding + and hello messages sent using multicasting. (Single + packet to all neighbors.) + + type nonbroadcast + On nonbroadcast network are packets sent to each neighbor + separately because of lack of multicast messages. + + type pointopoint + Pointopoint network connects just 2 routers together. No election + is provided there, this reduces a number of sent messages. + + authetication none + No passwords are sent in OSPF's packets. This is default value. + + authetication simple + In every packet is sent an 8 bytes long password. Received packets + without this password are ignored. This autentication mechanism is + very weak. + + password text + An 8 bytes long password used for authentication. + + neighbors + A set of neighbors to which hello messages on nonbroadcast networks + are sent. + + +Attributes + +

OSPF defines 3 route attributes. Each internal route has a metric. External +routes uses metric type 1 or metric type 2. Metric type one is comparable +with internal metric. Metric type 2 is always longer then metric type 1 +or internal metric. Each external route can also carry a tag. Tag is +32 bits long number and it's used for exporting routes to other protocols +in link-state it has no funtion. + +Example + +

+ + +protocol ospf MyOSPF { + area 0.0.0.0 { + tick 8; + interface "eth*" { + cost 11; + hello 15; + priority 100; + retransmit 7; + authentication simple; + password "aaa"; + }; + interface "ppp*" { + cost 100; + }; + }; + area 120 { + stub yes; + interface "-arc0" , "arc*" { + type nonbroadcast; + authentication none; + wait 50; + dead count 6; + neighbors { + 192.168.120.1; + 192.168.120.2; + 192.168.120.10; + }; + }; + }; +} + + Pipe Introduction -- cgit v1.2.3