/*
 *	This is an example configuration file.
 */

# Yet another comment

#log syslog { error };
#log "tmp" all;

#router id 62.168.0.1;

#define xyzzy = 120+10;

#filter sink { reject; }
#filter okay { accept; }

#table testable;

#protocol rip MyRIP_test {
#	preference xyzzy;
#	debug all;
#	port 1520;
#	period 7;
#	garbagetime 60;
#	interface "*" { mode broadcast; };
#	honour neighbour;
#	passwords { password "ahoj" from 0 to 10;
#		password "nazdar" from 10;
#	}
#	authentication none;
#	import filter { print "importing"; accept; };
#	export filter { print "exporting"; accept; };
#}

protocol direct {
#	disabled;
#	interface "-eth*", "*";
}

protocol kernel {
#	disabled;
#	learn;			# Learn all routes from the kernel
	persist;		# Don't remove routes on bird shutdown
	scan time 20;		# Scan kernel routing table every 20 seconds
#	async off;		# Netlink: Disable asynchronous events
#	import none;		# Default is import all
	export all;		# Default is export none
#	kernel table 5;		# Kernel table to synchronize with (default: main)
}

protocol device {
	scan time 10;		# Scan interfaces every 10 seconds
}

protocol static {
#	disabled;
#	table testable;
#	route 0.0.0.0/0 via 62.168.0.13;
#	route 62.168.0.0/25 reject;
#	route 10.0.0.0/8 reject;
#	route 10.1.1.0:255.255.255.0 via 62.168.0.3;
#	route 10.1.2.0:255.255.255.0 via 62.168.0.3;
#	route 10.1.3.0:255.255.255.0 via 62.168.0.4;
#	route 10.2.0.0/24 via "arc0";
}

#protocol pipe {
#	peer table testable;
#	import all;
#	export all;
#}