/* * This is an example configuration file. */ # Yet another comment #log syslog { error }; #log "tmp" all; #router id 62.168.0.1; #define xyzzy = 120+10; #filter sink { reject; } #filter okay { accept; } #table testable; #protocol rip MyRIP_test { # preference xyzzy; # debug all; # port 1520; # period 7; # garbagetime 60; # interface "*" { mode broadcast; }; # honour neighbour; # passwords { password "ahoj" from 0 to 10; # password "nazdar" from 10; # } # authentication none; # import filter { print "importing"; accept; }; # export filter { print "exporting"; accept; }; #} protocol direct { # disabled; # interface "-eth*", "*"; } protocol kernel { # disabled; # learn; # Learn all routes from the kernel persist; # Don't remove routes on bird shutdown scan time 20; # Scan kernel routing table every 20 seconds # async off; # Netlink: Disable asynchronous events # import none; # Default is import all export all; # Default is export none # kernel table 5; # Kernel table to synchronize with (default: main) } protocol device { scan time 10; # Scan interfaces every 10 seconds } protocol static { # disabled; # table testable; # route 0.0.0.0/0 via 62.168.0.13; # route 62.168.0.0/25 reject; # route 10.0.0.0/8 reject; # route 10.1.1.0:255.255.255.0 via 62.168.0.3; # route 10.1.2.0:255.255.255.0 via 62.168.0.3; # route 10.1.3.0:255.255.255.0 via 62.168.0.4; # route 10.2.0.0/24 via "arc0"; } #protocol pipe { # peer table testable; # import all; # export all; #}