diff options
Diffstat (limited to 'Matrix_9x14/build/CMakeCache.txt')
| -rw-r--r-- | Matrix_9x14/build/CMakeCache.txt | 1202 |
1 files changed, 1202 insertions, 0 deletions
diff --git a/Matrix_9x14/build/CMakeCache.txt b/Matrix_9x14/build/CMakeCache.txt new file mode 100644 index 0000000..1a15873 --- /dev/null +++ b/Matrix_9x14/build/CMakeCache.txt @@ -0,0 +1,1202 @@ +# This is the CMakeCache file. +# For build in directory: /home/xel/Dokumente/ledmatrix/Matrix_9x14/build +# It was generated by CMake: /usr/bin/cmake +# You can edit this file to change values found and used by cmake. +# If you do not want to change any of the values, simply exit the editor. +# If you do want to change a value, simply edit, save, and exit the editor. +# The syntax for the file is as follows: +# KEY:TYPE=VALUE +# KEY is the name of a variable in the cache. +# TYPE is a hint to GUI's for the type of VALUE, DO NOT EDIT TYPE!. +# VALUE is the current value for the KEY. + +######################## +# EXTERNAL cache entries +######################## + +//Path to a program. +ARDUINO_AVRDUDE_CONFIG_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/hardware/tools/avrdude.conf + +//Arvdude global flag list. +ARDUINO_AVRDUDE_FLAGS:STRING=-V + +//Path to a program. +ARDUINO_AVRDUDE_PROGRAM:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/hardware/tools/avrdude + +//List of detected Arduino Board configurations +ARDUINO_BOARDS:STRING=uno;atmega328;diecimila;nano328;nano;mega2560;mega;mini328;mini;ethernet;fio;bt328;bt;lilypad328;lilypad;pro5v328;pro5v;pro328;pro;atmega168;atmega8 + +//Path to a file. +ARDUINO_BOARDS_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/hardware/arduino/boards.txt + +//Path to a file. +ARDUINO_BOOTLOADERS_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/hardware/arduino/bootloaders + +//Path to a file. +ARDUINO_CORES_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/hardware/arduino/cores + +//Path to a file. +ARDUINO_LIBRARIES_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/libraries + +ARDUINO_OBJCOPY_EEP_FLAGS:STRING=-O;ihex;-j;.eeprom;--set-section-flags=.eeprom=alloc,load;--no-change-warnings;--change-section-lma;.eeprom=0 + +ARDUINO_OBJCOPY_HEX_FLAGS:STRING=-O;ihex;-R;.eeprom + +//List of detected Arduino Board configurations +ARDUINO_PROGRAMMERS:STRING=avrisp;avrispmkii;usbtinyisp;usbasp;parallel;arduinoisp + +//Path to a file. +ARDUINO_PROGRAMMERS_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/hardware/arduino/programmers.txt + +//Path to a file. +ARDUINO_REVISIONS_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/revisions.txt + +//Arduino SDK Version +ARDUINO_SDK_VERSION:STRING=1.0 + +//Path to a file. +ARDUINO_VARIANTS_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/hardware/arduino/variants + +//Path to a file. +ARDUINO_VERSION_PATH:FILEPATH=/home/xel/Dokumente/ledmatrix/arduino-1.0/lib/version.txt + +//Path to a program. +CMAKE_AR:FILEPATH=/usr/bin/avr-ar + +//Choose the type of build, options are: None(CMAKE_CXX_FLAGS or +// CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel. +CMAKE_BUILD_TYPE:STRING= + +//Enable/Disable color output during build. +CMAKE_COLOR_MAKEFILE:BOOL=ON + +//CXX compiler. +CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/avr-g++ + +//Path to a program. +CMAKE_CXX_COMPILER_WITH_PATH:FILEPATH=/usr/bin/avr-g++ + +CMAKE_CXX_FLAGS:STRING=-g -Os -ffunction-sections -fdata-sections -fno-exceptions + +CMAKE_CXX_FLAGS_DEBUG:STRING=-g -ffunction-sections -fdata-sections -fno-exceptions + +CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG -ffunction-sections -fdata-sections -fno-exceptions + +CMAKE_CXX_FLAGS_RELEASE:STRING=-0s -DNDEBUG -ffunction-sections -fdata-sections -fno-exceptions + +CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-0s -g -ffunction-sections -fdata-sections -fno-exceptions + +//C compiler. +CMAKE_C_COMPILER:FILEPATH=/usr/bin/avr-gcc + +//Path to a program. +CMAKE_C_COMPILER_WITH_PATH:FILEPATH=/usr/bin/avr-gcc + +CMAKE_C_FLAGS:STRING=-g -Os -ffunction-sections -fdata-sections + +CMAKE_C_FLAGS_DEBUG:STRING=-g -ffunction-sections -fdata-sections + +CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG -ffunction-sections -fdata-sections + +CMAKE_C_FLAGS_RELEASE:STRING=-0s -DNDEBUG -w -ffunction-sections -fdata-sections + +CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-0s -g -w -ffunction-sections -fdata-sections + +CMAKE_EXE_LINKER_FLAGS:STRING=-lc -lm + +CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=-lc -lm + +CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=-lc -lm + +CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=-lc -lm + +CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=-lc -lm + +//Enable/Disable output of compile commands during generation. +CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=OFF + +//Install path prefix, prepended onto install directories. +CMAKE_INSTALL_PREFIX:PATH=/usr/local + +//Path to a program. +CMAKE_LINKER:FILEPATH=/usr/bin/avr-ld + +//Path to a program. +CMAKE_MAKE_PROGRAM:FILEPATH=/usr/bin/make + +CMAKE_MODULE_LINKER_FLAGS:STRING= + +CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING= + +CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING= + +CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING= + +CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING= + +//Path to a program. +CMAKE_NM:FILEPATH=/usr/bin/avr-nm + +//Path to a program. +CMAKE_OBJCOPY:FILEPATH=/usr/bin/avr-objcopy + +//Path to a program. +CMAKE_OBJDUMP:FILEPATH=/usr/bin/avr-objdump + +//Value Computed by CMake +CMAKE_PROJECT_NAME:STATIC=GameOfLife + +//Path to a program. +CMAKE_RANLIB:FILEPATH=/usr/bin/avr-ranlib + +CMAKE_SHARED_LINKER_FLAGS:STRING= + +CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING= + +CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING= + +CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING= + +CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING= + +//If set, runtime paths are not added when using shared libraries. +CMAKE_SKIP_RPATH:BOOL=NO + +//Path to a program. +CMAKE_STRIP:FILEPATH=/usr/bin/avr-strip + +//The CMake toolchain file +CMAKE_TOOLCHAIN_FILE:FILEPATH=/home/xel/Dokumente/ledmatrix/Matrix_9x14/cmake/toolchains/Arduino.cmake + +//If true, cmake will use relative paths in makefiles and projects. +CMAKE_USE_RELATIVE_PATHS:BOOL=OFF + +//If this value is on, makefiles will be generated without the +// .SILENT directive, and all commands will be echoed to the console +// during the make. This is useful for debugging only. With Visual +// Studio IDE projects all commands are done without /nologo. +CMAKE_VERBOSE_MAKEFILE:BOOL=ON + +//Value Computed by CMake +GameOfLife_BINARY_DIR:STATIC=/home/xel/Dokumente/ledmatrix/Matrix_9x14/build + +//Value Computed by CMake +GameOfLife_SOURCE_DIR:STATIC=/home/xel/Dokumente/ledmatrix/Matrix_9x14 + +//Dependencies for target +atmega328_CORE_LIB_DEPENDS:STATIC= + +//Dependencies for the target +atmega328_Charliplexing_LIB_DEPENDS:STATIC=general;atmega328_CORE; + + +######################## +# INTERNAL cache entries +######################## + +//ADVANCED property for variable: ARDUINO_AVRDUDE_CONFIG_PATH +ARDUINO_AVRDUDE_CONFIG_PATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_AVRDUDE_FLAGS +ARDUINO_AVRDUDE_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_AVRDUDE_PROGRAM +ARDUINO_AVRDUDE_PROGRAM-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_BOARDS +ARDUINO_BOARDS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_BOARDS_PATH +ARDUINO_BOARDS_PATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_BOOTLOADERS_PATH +ARDUINO_BOOTLOADERS_PATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_CORES_PATH +ARDUINO_CORES_PATH-ADVANCED:INTERNAL=1 +//Arduino Found +ARDUINO_FOUND:INTERNAL=True +//ADVANCED property for variable: ARDUINO_LIBRARIES_PATH +ARDUINO_LIBRARIES_PATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_OBJCOPY_EEP_FLAGS +ARDUINO_OBJCOPY_EEP_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_OBJCOPY_HEX_FLAGS +ARDUINO_OBJCOPY_HEX_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_PROGRAMMERS +ARDUINO_PROGRAMMERS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_PROGRAMMERS_PATH +ARDUINO_PROGRAMMERS_PATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_REVISIONS_PATH +ARDUINO_REVISIONS_PATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_SDK_VERSION +ARDUINO_SDK_VERSION-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_VARIANTS_PATH +ARDUINO_VARIANTS_PATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: ARDUINO_VERSION_PATH +ARDUINO_VERSION_PATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_AR +CMAKE_AR-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_BUILD_TOOL +CMAKE_BUILD_TOOL-ADVANCED:INTERNAL=1 +//What is the target build tool cmake is generating for. +CMAKE_BUILD_TOOL:INTERNAL=/usr/bin/make +//This is the directory where this CMakeCache.txt was created +CMAKE_CACHEFILE_DIR:INTERNAL=/home/xel/Dokumente/ledmatrix/Matrix_9x14/build +//Major version of cmake used to create the current loaded cache +CMAKE_CACHE_MAJOR_VERSION:INTERNAL=2 +//Minor version of cmake used to create the current loaded cache +CMAKE_CACHE_MINOR_VERSION:INTERNAL=8 +//Patch version of cmake used to create the current loaded cache +CMAKE_CACHE_PATCH_VERSION:INTERNAL=5 +//ADVANCED property for variable: CMAKE_COLOR_MAKEFILE +CMAKE_COLOR_MAKEFILE-ADVANCED:INTERNAL=1 +//Path to CMake executable. +CMAKE_COMMAND:INTERNAL=/usr/bin/cmake +//Path to cpack program executable. +CMAKE_CPACK_COMMAND:INTERNAL=/usr/bin/cpack +//Path to ctest program executable. +CMAKE_CTEST_COMMAND:INTERNAL=/usr/bin/ctest +//ADVANCED property for variable: CMAKE_CXX_COMPILER +CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_COMPILER_WITH_PATH +CMAKE_CXX_COMPILER_WITH_PATH-ADVANCED:INTERNAL=1 +CMAKE_CXX_COMPILER_WORKS:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS +CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG +CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL +CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE +CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO +CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_COMPILER +CMAKE_C_COMPILER-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_COMPILER_WITH_PATH +CMAKE_C_COMPILER_WITH_PATH-ADVANCED:INTERNAL=1 +CMAKE_C_COMPILER_WORKS:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS +CMAKE_C_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG +CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL +CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE +CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO +CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//Result of TRY_COMPILE +CMAKE_DETERMINE_CXX_ABI_COMPILED:INTERNAL=TRUE +//Result of TRY_COMPILE +CMAKE_DETERMINE_C_ABI_COMPILED:INTERNAL=TRUE +//Executable file format +CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS +CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG +CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL +CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE +CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO +CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS +CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1 +//Name of generator. +CMAKE_GENERATOR:INTERNAL=Unix Makefiles +//Start directory with the top level CMakeLists.txt file for this +// project +CMAKE_HOME_DIRECTORY:INTERNAL=/home/xel/Dokumente/ledmatrix/Matrix_9x14 +//ADVANCED property for variable: CMAKE_LINKER +CMAKE_LINKER-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MAKE_PROGRAM +CMAKE_MAKE_PROGRAM-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS +CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG +CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL +CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE +CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO +CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_NM +CMAKE_NM-ADVANCED:INTERNAL=1 +//number of local generators +CMAKE_NUMBER_OF_LOCAL_GENERATORS:INTERNAL=1 +//ADVANCED property for variable: CMAKE_OBJCOPY +CMAKE_OBJCOPY-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_OBJDUMP +CMAKE_OBJDUMP-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_RANLIB +CMAKE_RANLIB-ADVANCED:INTERNAL=1 +//Path to CMake installation. +CMAKE_ROOT:INTERNAL=/usr/share/cmake-2.8 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS +CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG +CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL +CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE +CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO +CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SKIP_RPATH +CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_STRIP +CMAKE_STRIP-ADVANCED:INTERNAL=1 +//uname command +CMAKE_UNAME:INTERNAL=/bin/uname +//ADVANCED property for variable: CMAKE_USE_RELATIVE_PATHS +CMAKE_USE_RELATIVE_PATHS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE +CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1 +//Details about finding Arduino +FIND_PACKAGE_MESSAGE_DETAILS_Arduino:INTERNAL=[/home/xel/Dokumente/ledmatrix/Matrix_9x14/../arduino-1.0][1.0][v1.0(1.0)] +//Arduino arduinoisp Board settings list +arduinoisp.SETTINGS:INTERNAL=name;communication;protocol;speed +//Arduino arduinoisp Board setting +arduinoisp.communication:INTERNAL=serial +//Arduino arduinoisp Board setting +arduinoisp.name:INTERNAL=Arduino as ISP +//Arduino arduinoisp Board setting +arduinoisp.protocol:INTERNAL=stk500v1 +//Arduino arduinoisp Board setting +arduinoisp.speed:INTERNAL=19200 +//Arduino atmega168 Board settings list +atmega168.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino atmega168 Board sub-settings list +atmega168.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino atmega168 Board setting +atmega168.bootloader.extended_fuses:INTERNAL=0x00 +//Arduino atmega168 Board setting +atmega168.bootloader.file:INTERNAL=ATmegaBOOT_168_ng.hex +//Arduino atmega168 Board setting +atmega168.bootloader.high_fuses:INTERNAL=0xdd +//Arduino atmega168 Board setting +atmega168.bootloader.lock_bits:INTERNAL=0x0F +//Arduino atmega168 Board setting +atmega168.bootloader.low_fuses:INTERNAL=0xff +//Arduino atmega168 Board setting +atmega168.bootloader.path:INTERNAL=atmega +//Arduino atmega168 Board setting +atmega168.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino atmega168 Board sub-settings list +atmega168.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino atmega168 Board setting +atmega168.build.core:INTERNAL=arduino +//Arduino atmega168 Board setting +atmega168.build.f_cpu:INTERNAL=16000000L +//Arduino atmega168 Board setting +atmega168.build.mcu:INTERNAL=atmega168 +//Arduino atmega168 Board setting +atmega168.build.variant:INTERNAL=standard +//Arduino atmega168 Board setting +atmega168.name:INTERNAL=Arduino NG or older w/ ATmega168 +//Arduino atmega168 Board sub-settings list +atmega168.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino atmega168 Board setting +atmega168.upload.maximum_size:INTERNAL=14336 +//Arduino atmega168 Board setting +atmega168.upload.protocol:INTERNAL=arduino +//Arduino atmega168 Board setting +atmega168.upload.speed:INTERNAL=19200 +//Arduino atmega328 Board settings list +atmega328.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino atmega328 Board sub-settings list +atmega328.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino atmega328 Board setting +atmega328.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino atmega328 Board setting +atmega328.bootloader.file:INTERNAL=ATmegaBOOT_168_atmega328.hex +//Arduino atmega328 Board setting +atmega328.bootloader.high_fuses:INTERNAL=0xDA +//Arduino atmega328 Board setting +atmega328.bootloader.lock_bits:INTERNAL=0x0F +//Arduino atmega328 Board setting +atmega328.bootloader.low_fuses:INTERNAL=0xFF +//Arduino atmega328 Board setting +atmega328.bootloader.path:INTERNAL=atmega +//Arduino atmega328 Board setting +atmega328.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino atmega328 Board sub-settings list +atmega328.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino atmega328 Board setting +atmega328.build.core:INTERNAL=arduino +//Arduino atmega328 Board setting +atmega328.build.f_cpu:INTERNAL=16000000L +//Arduino atmega328 Board setting +atmega328.build.mcu:INTERNAL=atmega328p +//Arduino atmega328 Board setting +atmega328.build.variant:INTERNAL=standard +//Arduino atmega328 Board setting +atmega328.name:INTERNAL=Arduino Duemilanove w/ ATmega328 +//Arduino atmega328 Board sub-settings list +atmega328.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino atmega328 Board setting +atmega328.upload.maximum_size:INTERNAL=30720 +//Arduino atmega328 Board setting +atmega328.upload.protocol:INTERNAL=arduino +//Arduino atmega328 Board setting +atmega328.upload.speed:INTERNAL=57600 +//Arduino atmega8 Board settings list +atmega8.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino atmega8 Board sub-settings list +atmega8.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;path;file;unlock_bits;lock_bits +//Arduino atmega8 Board setting +atmega8.bootloader.file:INTERNAL=ATmegaBOOT.hex +//Arduino atmega8 Board setting +atmega8.bootloader.high_fuses:INTERNAL=0xca +//Arduino atmega8 Board setting +atmega8.bootloader.lock_bits:INTERNAL=0x0F +//Arduino atmega8 Board setting +atmega8.bootloader.low_fuses:INTERNAL=0xdf +//Arduino atmega8 Board setting +atmega8.bootloader.path:INTERNAL=atmega8 +//Arduino atmega8 Board setting +atmega8.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino atmega8 Board sub-settings list +atmega8.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino atmega8 Board setting +atmega8.build.core:INTERNAL=arduino +//Arduino atmega8 Board setting +atmega8.build.f_cpu:INTERNAL=16000000L +//Arduino atmega8 Board setting +atmega8.build.mcu:INTERNAL=atmega8 +//Arduino atmega8 Board setting +atmega8.build.variant:INTERNAL=standard +//Arduino atmega8 Board setting +atmega8.name:INTERNAL=Arduino NG or older w/ ATmega8 +//Arduino atmega8 Board sub-settings list +atmega8.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino atmega8 Board setting +atmega8.upload.maximum_size:INTERNAL=7168 +//Arduino atmega8 Board setting +atmega8.upload.protocol:INTERNAL=arduino +//Arduino atmega8 Board setting +atmega8.upload.speed:INTERNAL=19200 +//Arduino avrisp Board settings list +avrisp.SETTINGS:INTERNAL=name;communication;protocol +//Arduino avrisp Board setting +avrisp.communication:INTERNAL=serial +//Arduino avrisp Board setting +avrisp.name:INTERNAL=AVR ISP +//Arduino avrisp Board setting +avrisp.protocol:INTERNAL=stk500v1 +//Arduino avrispmkii Board settings list +avrispmkii.SETTINGS:INTERNAL=name;communication;protocol +//Arduino avrispmkii Board setting +avrispmkii.communication:INTERNAL=usb +//Arduino avrispmkii Board setting +avrispmkii.name:INTERNAL=AVRISP mkII +//Arduino avrispmkii Board setting +avrispmkii.protocol:INTERNAL=stk500v2 +//Arduino bt Board settings list +bt.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino bt Board sub-settings list +bt.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino bt Board setting +bt.bootloader.extended_fuses:INTERNAL=0x00 +//Arduino bt Board setting +bt.bootloader.file:INTERNAL=ATmegaBOOT_168.hex +//Arduino bt Board setting +bt.bootloader.high_fuses:INTERNAL=0xdd +//Arduino bt Board setting +bt.bootloader.lock_bits:INTERNAL=0x0F +//Arduino bt Board setting +bt.bootloader.low_fuses:INTERNAL=0xff +//Arduino bt Board setting +bt.bootloader.path:INTERNAL=bt +//Arduino bt Board setting +bt.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino bt Board sub-settings list +bt.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino bt Board setting +bt.build.core:INTERNAL=arduino +//Arduino bt Board setting +bt.build.f_cpu:INTERNAL=16000000L +//Arduino bt Board setting +bt.build.mcu:INTERNAL=atmega168 +//Arduino bt Board setting +bt.build.variant:INTERNAL=eightanaloginputs +//Arduino bt Board setting +bt.name:INTERNAL=Arduino BT w/ ATmega168 +//Arduino bt Board sub-settings list +bt.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed;disable_flushing +//Arduino bt Board setting +bt.upload.disable_flushing:INTERNAL=true +//Arduino bt Board setting +bt.upload.maximum_size:INTERNAL=14336 +//Arduino bt Board setting +bt.upload.protocol:INTERNAL=arduino +//Arduino bt Board setting +bt.upload.speed:INTERNAL=19200 +//Arduino bt328 Board settings list +bt328.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino bt328 Board sub-settings list +bt328.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino bt328 Board setting +bt328.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino bt328 Board setting +bt328.bootloader.file:INTERNAL=ATmegaBOOT_168_atmega328_bt.hex +//Arduino bt328 Board setting +bt328.bootloader.high_fuses:INTERNAL=0xd8 +//Arduino bt328 Board setting +bt328.bootloader.lock_bits:INTERNAL=0x0F +//Arduino bt328 Board setting +bt328.bootloader.low_fuses:INTERNAL=0xff +//Arduino bt328 Board setting +bt328.bootloader.path:INTERNAL=bt +//Arduino bt328 Board setting +bt328.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino bt328 Board sub-settings list +bt328.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino bt328 Board setting +bt328.build.core:INTERNAL=arduino +//Arduino bt328 Board setting +bt328.build.f_cpu:INTERNAL=16000000L +//Arduino bt328 Board setting +bt328.build.mcu:INTERNAL=atmega328p +//Arduino bt328 Board setting +bt328.build.variant:INTERNAL=eightanaloginputs +//Arduino bt328 Board setting +bt328.name:INTERNAL=Arduino BT w/ ATmega328 +//Arduino bt328 Board sub-settings list +bt328.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed;disable_flushing +//Arduino bt328 Board setting +bt328.upload.disable_flushing:INTERNAL=true +//Arduino bt328 Board setting +bt328.upload.maximum_size:INTERNAL=28672 +//Arduino bt328 Board setting +bt328.upload.protocol:INTERNAL=arduino +//Arduino bt328 Board setting +bt328.upload.speed:INTERNAL=19200 +//Arduino diecimila Board settings list +diecimila.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino diecimila Board sub-settings list +diecimila.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino diecimila Board setting +diecimila.bootloader.extended_fuses:INTERNAL=0x00 +//Arduino diecimila Board setting +diecimila.bootloader.file:INTERNAL=ATmegaBOOT_168_diecimila.hex +//Arduino diecimila Board setting +diecimila.bootloader.high_fuses:INTERNAL=0xdd +//Arduino diecimila Board setting +diecimila.bootloader.lock_bits:INTERNAL=0x0F +//Arduino diecimila Board setting +diecimila.bootloader.low_fuses:INTERNAL=0xff +//Arduino diecimila Board setting +diecimila.bootloader.path:INTERNAL=atmega +//Arduino diecimila Board setting +diecimila.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino diecimila Board sub-settings list +diecimila.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino diecimila Board setting +diecimila.build.core:INTERNAL=arduino +//Arduino diecimila Board setting +diecimila.build.f_cpu:INTERNAL=16000000L +//Arduino diecimila Board setting +diecimila.build.mcu:INTERNAL=atmega168 +//Arduino diecimila Board setting +diecimila.build.variant:INTERNAL=standard +//Arduino diecimila Board setting +diecimila.name:INTERNAL=Arduino Diecimila or Duemilanove w/ ATmega168 +//Arduino diecimila Board sub-settings list +diecimila.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino diecimila Board setting +diecimila.upload.maximum_size:INTERNAL=14336 +//Arduino diecimila Board setting +diecimila.upload.protocol:INTERNAL=arduino +//Arduino diecimila Board setting +diecimila.upload.speed:INTERNAL=19200 +//Arduino ethernet Board settings list +ethernet.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino ethernet Board sub-settings list +ethernet.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino ethernet Board setting +ethernet.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino ethernet Board setting +ethernet.bootloader.file:INTERNAL=optiboot_atmega328.hex +//Arduino ethernet Board setting +ethernet.bootloader.high_fuses:INTERNAL=0xde +//Arduino ethernet Board setting +ethernet.bootloader.lock_bits:INTERNAL=0x0F +//Arduino ethernet Board setting +ethernet.bootloader.low_fuses:INTERNAL=0xff +//Arduino ethernet Board setting +ethernet.bootloader.path:INTERNAL=optiboot +//Arduino ethernet Board setting +ethernet.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino ethernet Board sub-settings list +ethernet.build.SUBSETTINGS:INTERNAL=variant;mcu;f_cpu;core +//Arduino ethernet Board setting +ethernet.build.core:INTERNAL=arduino +//Arduino ethernet Board setting +ethernet.build.f_cpu:INTERNAL=16000000L +//Arduino ethernet Board setting +ethernet.build.mcu:INTERNAL=atmega328p +//Arduino ethernet Board setting +ethernet.build.variant:INTERNAL=standard +//Arduino ethernet Board setting +ethernet.name:INTERNAL=Arduino Ethernet +//Arduino ethernet Board sub-settings list +ethernet.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino ethernet Board setting +ethernet.upload.maximum_size:INTERNAL=32256 +//Arduino ethernet Board setting +ethernet.upload.protocol:INTERNAL=arduino +//Arduino ethernet Board setting +ethernet.upload.speed:INTERNAL=115200 +//Arduino fio Board settings list +fio.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino fio Board sub-settings list +fio.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino fio Board setting +fio.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino fio Board setting +fio.bootloader.file:INTERNAL=ATmegaBOOT_168_atmega328_pro_8MHz.hex +//Arduino fio Board setting +fio.bootloader.high_fuses:INTERNAL=0xDA +//Arduino fio Board setting +fio.bootloader.lock_bits:INTERNAL=0x0F +//Arduino fio Board setting +fio.bootloader.low_fuses:INTERNAL=0xFF +//Arduino fio Board setting +fio.bootloader.path:INTERNAL=arduino:atmega +//Arduino fio Board setting +fio.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino fio Board sub-settings list +fio.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino fio Board setting +fio.build.core:INTERNAL=arduino +//Arduino fio Board setting +fio.build.f_cpu:INTERNAL=8000000L +//Arduino fio Board setting +fio.build.mcu:INTERNAL=atmega328p +//Arduino fio Board setting +fio.build.variant:INTERNAL=eightanaloginputs +//Arduino fio Board setting +fio.name:INTERNAL=Arduino Fio +//Arduino fio Board sub-settings list +fio.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino fio Board setting +fio.upload.maximum_size:INTERNAL=30720 +//Arduino fio Board setting +fio.upload.protocol:INTERNAL=arduino +//Arduino fio Board setting +fio.upload.speed:INTERNAL=57600 +//Arduino lilypad Board settings list +lilypad.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino lilypad Board sub-settings list +lilypad.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino lilypad Board setting +lilypad.bootloader.extended_fuses:INTERNAL=0x00 +//Arduino lilypad Board setting +lilypad.bootloader.file:INTERNAL=LilyPadBOOT_168.hex +//Arduino lilypad Board setting +lilypad.bootloader.high_fuses:INTERNAL=0xdd +//Arduino lilypad Board setting +lilypad.bootloader.lock_bits:INTERNAL=0x0F +//Arduino lilypad Board setting +lilypad.bootloader.low_fuses:INTERNAL=0xe2 +//Arduino lilypad Board setting +lilypad.bootloader.path:INTERNAL=lilypad +//Arduino lilypad Board setting +lilypad.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino lilypad Board sub-settings list +lilypad.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino lilypad Board setting +lilypad.build.core:INTERNAL=arduino +//Arduino lilypad Board setting +lilypad.build.f_cpu:INTERNAL=8000000L +//Arduino lilypad Board setting +lilypad.build.mcu:INTERNAL=atmega168 +//Arduino lilypad Board setting +lilypad.build.variant:INTERNAL=standard +//Arduino lilypad Board setting +lilypad.name:INTERNAL=LilyPad Arduino w/ ATmega168 +//Arduino lilypad Board sub-settings list +lilypad.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino lilypad Board setting +lilypad.upload.maximum_size:INTERNAL=14336 +//Arduino lilypad Board setting +lilypad.upload.protocol:INTERNAL=arduino +//Arduino lilypad Board setting +lilypad.upload.speed:INTERNAL=19200 +//Arduino lilypad328 Board settings list +lilypad328.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino lilypad328 Board sub-settings list +lilypad328.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino lilypad328 Board setting +lilypad328.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino lilypad328 Board setting +lilypad328.bootloader.file:INTERNAL=ATmegaBOOT_168_atmega328_pro_8MHz.hex +//Arduino lilypad328 Board setting +lilypad328.bootloader.high_fuses:INTERNAL=0xDA +//Arduino lilypad328 Board setting +lilypad328.bootloader.lock_bits:INTERNAL=0x0F +//Arduino lilypad328 Board setting +lilypad328.bootloader.low_fuses:INTERNAL=0xFF +//Arduino lilypad328 Board setting +lilypad328.bootloader.path:INTERNAL=atmega +//Arduino lilypad328 Board setting +lilypad328.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino lilypad328 Board sub-settings list +lilypad328.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino lilypad328 Board setting +lilypad328.build.core:INTERNAL=arduino +//Arduino lilypad328 Board setting +lilypad328.build.f_cpu:INTERNAL=8000000L +//Arduino lilypad328 Board setting +lilypad328.build.mcu:INTERNAL=atmega328p +//Arduino lilypad328 Board setting +lilypad328.build.variant:INTERNAL=standard +//Arduino lilypad328 Board setting +lilypad328.name:INTERNAL=LilyPad Arduino w/ ATmega328 +//Arduino lilypad328 Board sub-settings list +lilypad328.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino lilypad328 Board setting +lilypad328.upload.maximum_size:INTERNAL=30720 +//Arduino lilypad328 Board setting +lilypad328.upload.protocol:INTERNAL=arduino +//Arduino lilypad328 Board setting +lilypad328.upload.speed:INTERNAL=57600 +//Arduino mega Board settings list +mega.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino mega Board sub-settings list +mega.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino mega Board setting +mega.bootloader.extended_fuses:INTERNAL=0xF5 +//Arduino mega Board setting +mega.bootloader.file:INTERNAL=ATmegaBOOT_168_atmega1280.hex +//Arduino mega Board setting +mega.bootloader.high_fuses:INTERNAL=0xDA +//Arduino mega Board setting +mega.bootloader.lock_bits:INTERNAL=0x0F +//Arduino mega Board setting +mega.bootloader.low_fuses:INTERNAL=0xFF +//Arduino mega Board setting +mega.bootloader.path:INTERNAL=atmega +//Arduino mega Board setting +mega.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino mega Board sub-settings list +mega.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino mega Board setting +mega.build.core:INTERNAL=arduino +//Arduino mega Board setting +mega.build.f_cpu:INTERNAL=16000000L +//Arduino mega Board setting +mega.build.mcu:INTERNAL=atmega1280 +//Arduino mega Board setting +mega.build.variant:INTERNAL=mega +//Arduino mega Board setting +mega.name:INTERNAL=Arduino Mega (ATmega1280) +//Arduino mega Board sub-settings list +mega.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino mega Board setting +mega.upload.maximum_size:INTERNAL=126976 +//Arduino mega Board setting +mega.upload.protocol:INTERNAL=arduino +//Arduino mega Board setting +mega.upload.speed:INTERNAL=57600 +//Arduino mega2560 Board settings list +mega2560.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino mega2560 Board sub-settings list +mega2560.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino mega2560 Board setting +mega2560.bootloader.extended_fuses:INTERNAL=0xFD +//Arduino mega2560 Board setting +mega2560.bootloader.file:INTERNAL=stk500boot_v2_mega2560.hex +//Arduino mega2560 Board setting +mega2560.bootloader.high_fuses:INTERNAL=0xD8 +//Arduino mega2560 Board setting +mega2560.bootloader.lock_bits:INTERNAL=0x0F +//Arduino mega2560 Board setting +mega2560.bootloader.low_fuses:INTERNAL=0xFF +//Arduino mega2560 Board setting +mega2560.bootloader.path:INTERNAL=stk500v2 +//Arduino mega2560 Board setting +mega2560.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino mega2560 Board sub-settings list +mega2560.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino mega2560 Board setting +mega2560.build.core:INTERNAL=arduino +//Arduino mega2560 Board setting +mega2560.build.f_cpu:INTERNAL=16000000L +//Arduino mega2560 Board setting +mega2560.build.mcu:INTERNAL=atmega2560 +//Arduino mega2560 Board setting +mega2560.build.variant:INTERNAL=mega +//Arduino mega2560 Board setting +mega2560.name:INTERNAL=Arduino Mega 2560 or Mega ADK +//Arduino mega2560 Board sub-settings list +mega2560.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino mega2560 Board setting +mega2560.upload.maximum_size:INTERNAL=258048 +//Arduino mega2560 Board setting +mega2560.upload.protocol:INTERNAL=stk500v2 +//Arduino mega2560 Board setting +mega2560.upload.speed:INTERNAL=115200 +//Arduino mini Board settings list +mini.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino mini Board sub-settings list +mini.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino mini Board setting +mini.bootloader.extended_fuses:INTERNAL=0x00 +//Arduino mini Board setting +mini.bootloader.file:INTERNAL=ATmegaBOOT_168_ng.hex +//Arduino mini Board setting +mini.bootloader.high_fuses:INTERNAL=0xdd +//Arduino mini Board setting +mini.bootloader.lock_bits:INTERNAL=0x0F +//Arduino mini Board setting +mini.bootloader.low_fuses:INTERNAL=0xff +//Arduino mini Board setting +mini.bootloader.path:INTERNAL=atmega +//Arduino mini Board setting +mini.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino mini Board sub-settings list +mini.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino mini Board setting +mini.build.core:INTERNAL=arduino +//Arduino mini Board setting +mini.build.f_cpu:INTERNAL=16000000L +//Arduino mini Board setting +mini.build.mcu:INTERNAL=atmega168 +//Arduino mini Board setting +mini.build.variant:INTERNAL=eightanaloginputs +//Arduino mini Board setting +mini.name:INTERNAL=Arduino Mini w/ ATmega168 +//Arduino mini Board sub-settings list +mini.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino mini Board setting +mini.upload.maximum_size:INTERNAL=14336 +//Arduino mini Board setting +mini.upload.protocol:INTERNAL=arduino +//Arduino mini Board setting +mini.upload.speed:INTERNAL=19200 +//Arduino mini328 Board settings list +mini328.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino mini328 Board sub-settings list +mini328.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino mini328 Board setting +mini328.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino mini328 Board setting +mini328.bootloader.file:INTERNAL=optiboot_atmega328-Mini.hex +//Arduino mini328 Board setting +mini328.bootloader.high_fuses:INTERNAL=0xd8 +//Arduino mini328 Board setting +mini328.bootloader.lock_bits:INTERNAL=0x0F +//Arduino mini328 Board setting +mini328.bootloader.low_fuses:INTERNAL=0xff +//Arduino mini328 Board setting +mini328.bootloader.path:INTERNAL=optiboot +//Arduino mini328 Board setting +mini328.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino mini328 Board sub-settings list +mini328.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino mini328 Board setting +mini328.build.core:INTERNAL=arduino +//Arduino mini328 Board setting +mini328.build.f_cpu:INTERNAL=16000000L +//Arduino mini328 Board setting +mini328.build.mcu:INTERNAL=atmega328p +//Arduino mini328 Board setting +mini328.build.variant:INTERNAL=eightanaloginputs +//Arduino mini328 Board setting +mini328.name:INTERNAL=Arduino Mini w/ ATmega328 +//Arduino mini328 Board sub-settings list +mini328.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino mini328 Board setting +mini328.upload.maximum_size:INTERNAL=28672 +//Arduino mini328 Board setting +mini328.upload.protocol:INTERNAL=stk500 +//Arduino mini328 Board setting +mini328.upload.speed:INTERNAL=115200 +//Arduino nano Board settings list +nano.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino nano Board sub-settings list +nano.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino nano Board setting +nano.bootloader.extended_fuses:INTERNAL=0x00 +//Arduino nano Board setting +nano.bootloader.file:INTERNAL=ATmegaBOOT_168_diecimila.hex +//Arduino nano Board setting +nano.bootloader.high_fuses:INTERNAL=0xdd +//Arduino nano Board setting +nano.bootloader.lock_bits:INTERNAL=0x0F +//Arduino nano Board setting +nano.bootloader.low_fuses:INTERNAL=0xff +//Arduino nano Board setting +nano.bootloader.path:INTERNAL=atmega +//Arduino nano Board setting +nano.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino nano Board sub-settings list +nano.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino nano Board setting +nano.build.core:INTERNAL=arduino +//Arduino nano Board setting +nano.build.f_cpu:INTERNAL=16000000L +//Arduino nano Board setting +nano.build.mcu:INTERNAL=atmega168 +//Arduino nano Board setting +nano.build.variant:INTERNAL=eightanaloginputs +//Arduino nano Board setting +nano.name:INTERNAL=Arduino Nano w/ ATmega168 +//Arduino nano Board sub-settings list +nano.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino nano Board setting +nano.upload.maximum_size:INTERNAL=14336 +//Arduino nano Board setting +nano.upload.protocol:INTERNAL=arduino +//Arduino nano Board setting +nano.upload.speed:INTERNAL=19200 +//Arduino nano328 Board settings list +nano328.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino nano328 Board sub-settings list +nano328.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino nano328 Board setting +nano328.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino nano328 Board setting +nano328.bootloader.file:INTERNAL=ATmegaBOOT_168_atmega328.hex +//Arduino nano328 Board setting +nano328.bootloader.high_fuses:INTERNAL=0xDA +//Arduino nano328 Board setting +nano328.bootloader.lock_bits:INTERNAL=0x0F +//Arduino nano328 Board setting +nano328.bootloader.low_fuses:INTERNAL=0xFF +//Arduino nano328 Board setting +nano328.bootloader.path:INTERNAL=atmega +//Arduino nano328 Board setting +nano328.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino nano328 Board sub-settings list +nano328.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino nano328 Board setting +nano328.build.core:INTERNAL=arduino +//Arduino nano328 Board setting +nano328.build.f_cpu:INTERNAL=16000000L +//Arduino nano328 Board setting +nano328.build.mcu:INTERNAL=atmega328p +//Arduino nano328 Board setting +nano328.build.variant:INTERNAL=eightanaloginputs +//Arduino nano328 Board setting +nano328.name:INTERNAL=Arduino Nano w/ ATmega328 +//Arduino nano328 Board sub-settings list +nano328.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino nano328 Board setting +nano328.upload.maximum_size:INTERNAL=30720 +//Arduino nano328 Board setting +nano328.upload.protocol:INTERNAL=arduino +//Arduino nano328 Board setting +nano328.upload.speed:INTERNAL=57600 +//Arduino parallel Board settings list +parallel.SETTINGS:INTERNAL=name;protocol;force +//Arduino parallel Board setting +parallel.force:INTERNAL=true +//Arduino parallel Board setting +parallel.name:INTERNAL=Parallel Programmer +//Arduino parallel Board setting +parallel.protocol:INTERNAL=dapa +//Arduino pro Board settings list +pro.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino pro Board sub-settings list +pro.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino pro Board setting +pro.bootloader.extended_fuses:INTERNAL=0x00 +//Arduino pro Board setting +pro.bootloader.file:INTERNAL=ATmegaBOOT_168_pro_8MHz.hex +//Arduino pro Board setting +pro.bootloader.high_fuses:INTERNAL=0xdd +//Arduino pro Board setting +pro.bootloader.lock_bits:INTERNAL=0x0F +//Arduino pro Board setting +pro.bootloader.low_fuses:INTERNAL=0xc6 +//Arduino pro Board setting +pro.bootloader.path:INTERNAL=atmega +//Arduino pro Board setting +pro.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino pro Board sub-settings list +pro.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino pro Board setting +pro.build.core:INTERNAL=arduino +//Arduino pro Board setting +pro.build.f_cpu:INTERNAL=8000000L +//Arduino pro Board setting +pro.build.mcu:INTERNAL=atmega168 +//Arduino pro Board setting +pro.build.variant:INTERNAL=standard +//Arduino pro Board setting +pro.name:INTERNAL=Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168 +//Arduino pro Board sub-settings list +pro.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino pro Board setting +pro.upload.maximum_size:INTERNAL=14336 +//Arduino pro Board setting +pro.upload.protocol:INTERNAL=arduino +//Arduino pro Board setting +pro.upload.speed:INTERNAL=19200 +//Arduino pro328 Board settings list +pro328.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino pro328 Board sub-settings list +pro328.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino pro328 Board setting +pro328.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino pro328 Board setting +pro328.bootloader.file:INTERNAL=ATmegaBOOT_168_atmega328_pro_8MHz.hex +//Arduino pro328 Board setting +pro328.bootloader.high_fuses:INTERNAL=0xDA +//Arduino pro328 Board setting +pro328.bootloader.lock_bits:INTERNAL=0x0F +//Arduino pro328 Board setting +pro328.bootloader.low_fuses:INTERNAL=0xFF +//Arduino pro328 Board setting +pro328.bootloader.path:INTERNAL=atmega +//Arduino pro328 Board setting +pro328.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino pro328 Board sub-settings list +pro328.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino pro328 Board setting +pro328.build.core:INTERNAL=arduino +//Arduino pro328 Board setting +pro328.build.f_cpu:INTERNAL=8000000L +//Arduino pro328 Board setting +pro328.build.mcu:INTERNAL=atmega328p +//Arduino pro328 Board setting +pro328.build.variant:INTERNAL=standard +//Arduino pro328 Board setting +pro328.name:INTERNAL=Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328 +//Arduino pro328 Board sub-settings list +pro328.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino pro328 Board setting +pro328.upload.maximum_size:INTERNAL=30720 +//Arduino pro328 Board setting +pro328.upload.protocol:INTERNAL=arduino +//Arduino pro328 Board setting +pro328.upload.speed:INTERNAL=57600 +//Arduino pro5v Board settings list +pro5v.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino pro5v Board sub-settings list +pro5v.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino pro5v Board setting +pro5v.bootloader.extended_fuses:INTERNAL=0x00 +//Arduino pro5v Board setting +pro5v.bootloader.file:INTERNAL=ATmegaBOOT_168_diecimila.hex +//Arduino pro5v Board setting +pro5v.bootloader.high_fuses:INTERNAL=0xdd +//Arduino pro5v Board setting +pro5v.bootloader.lock_bits:INTERNAL=0x0F +//Arduino pro5v Board setting +pro5v.bootloader.low_fuses:INTERNAL=0xff +//Arduino pro5v Board setting +pro5v.bootloader.path:INTERNAL=atmega +//Arduino pro5v Board setting +pro5v.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino pro5v Board sub-settings list +pro5v.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino pro5v Board setting +pro5v.build.core:INTERNAL=arduino +//Arduino pro5v Board setting +pro5v.build.f_cpu:INTERNAL=16000000L +//Arduino pro5v Board setting +pro5v.build.mcu:INTERNAL=atmega168 +//Arduino pro5v Board setting +pro5v.build.variant:INTERNAL=standard +//Arduino pro5v Board setting +pro5v.name:INTERNAL=Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168 +//Arduino pro5v Board sub-settings list +pro5v.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino pro5v Board setting +pro5v.upload.maximum_size:INTERNAL=14336 +//Arduino pro5v Board setting +pro5v.upload.protocol:INTERNAL=arduino +//Arduino pro5v Board setting +pro5v.upload.speed:INTERNAL=19200 +//Arduino pro5v328 Board settings list +pro5v328.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino pro5v328 Board sub-settings list +pro5v328.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino pro5v328 Board setting +pro5v328.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino pro5v328 Board setting +pro5v328.bootloader.file:INTERNAL=ATmegaBOOT_168_atmega328.hex +//Arduino pro5v328 Board setting +pro5v328.bootloader.high_fuses:INTERNAL=0xDA +//Arduino pro5v328 Board setting +pro5v328.bootloader.lock_bits:INTERNAL=0x0F +//Arduino pro5v328 Board setting +pro5v328.bootloader.low_fuses:INTERNAL=0xFF +//Arduino pro5v328 Board setting +pro5v328.bootloader.path:INTERNAL=atmega +//Arduino pro5v328 Board setting +pro5v328.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino pro5v328 Board sub-settings list +pro5v328.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino pro5v328 Board setting +pro5v328.build.core:INTERNAL=arduino +//Arduino pro5v328 Board setting +pro5v328.build.f_cpu:INTERNAL=16000000L +//Arduino pro5v328 Board setting +pro5v328.build.mcu:INTERNAL=atmega328p +//Arduino pro5v328 Board setting +pro5v328.build.variant:INTERNAL=standard +//Arduino pro5v328 Board setting +pro5v328.name:INTERNAL=Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328 +//Arduino pro5v328 Board sub-settings list +pro5v328.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino pro5v328 Board setting +pro5v328.upload.maximum_size:INTERNAL=30720 +//Arduino pro5v328 Board setting +pro5v328.upload.protocol:INTERNAL=arduino +//Arduino pro5v328 Board setting +pro5v328.upload.speed:INTERNAL=57600 +//Arduino uno Board settings list +uno.SETTINGS:INTERNAL=name;upload;bootloader;build +//Arduino uno Board sub-settings list +uno.bootloader.SUBSETTINGS:INTERNAL=low_fuses;high_fuses;extended_fuses;path;file;unlock_bits;lock_bits +//Arduino uno Board setting +uno.bootloader.extended_fuses:INTERNAL=0x05 +//Arduino uno Board setting +uno.bootloader.file:INTERNAL=optiboot_atmega328.hex +//Arduino uno Board setting +uno.bootloader.high_fuses:INTERNAL=0xde +//Arduino uno Board setting +uno.bootloader.lock_bits:INTERNAL=0x0F +//Arduino uno Board setting +uno.bootloader.low_fuses:INTERNAL=0xff +//Arduino uno Board setting +uno.bootloader.path:INTERNAL=optiboot +//Arduino uno Board setting +uno.bootloader.unlock_bits:INTERNAL=0x3F +//Arduino uno Board sub-settings list +uno.build.SUBSETTINGS:INTERNAL=mcu;f_cpu;core;variant +//Arduino uno Board setting +uno.build.core:INTERNAL=arduino +//Arduino uno Board setting +uno.build.f_cpu:INTERNAL=16000000L +//Arduino uno Board setting +uno.build.mcu:INTERNAL=atmega328p +//Arduino uno Board setting +uno.build.variant:INTERNAL=standard +//Arduino uno Board setting +uno.name:INTERNAL=Arduino Uno +//Arduino uno Board sub-settings list +uno.upload.SUBSETTINGS:INTERNAL=protocol;maximum_size;speed +//Arduino uno Board setting +uno.upload.maximum_size:INTERNAL=32256 +//Arduino uno Board setting +uno.upload.protocol:INTERNAL=arduino +//Arduino uno Board setting +uno.upload.speed:INTERNAL=115200 +//Arduino usbasp Board settings list +usbasp.SETTINGS:INTERNAL=name;communication;protocol +//Arduino usbasp Board setting +usbasp.communication:INTERNAL=usb +//Arduino usbasp Board setting +usbasp.name:INTERNAL=USBasp +//Arduino usbasp Board setting +usbasp.protocol:INTERNAL=usbasp +//Arduino usbtinyisp Board settings list +usbtinyisp.SETTINGS:INTERNAL=name;protocol +//Arduino usbtinyisp Board setting +usbtinyisp.name:INTERNAL=USBtinyISP +//Arduino usbtinyisp Board setting +usbtinyisp.protocol:INTERNAL=usbtiny + |