diff options
| -rw-r--r-- | .gitconfig | 25 | ||||
| -rw-r--r-- | .screenrc | 8 | ||||
| -rw-r--r-- | zshrc | 3756 |
3 files changed, 3789 insertions, 0 deletions
diff --git a/.gitconfig b/.gitconfig new file mode 100644 index 0000000..0005838 --- /dev/null +++ b/.gitconfig @@ -0,0 +1,25 @@ +[user] + name = Matthias Schiffer + email = mschiffer@universe-factory.net + signingkey = 0x16EF3F64CB201D9C +[merge] + tool = meld +[color] + ui = auto +[sendemail] + suppressfrom = true + chainreplyto = false +[format] + thread = true +[log] + decorate = true +[url "git://git.debian.org/d-i/"] + insteadOf = git+ssh://git.debian.org/git/d-i/ +[commit] + gpgsign = true +[push] + default = upstream +[core] + abbrev = 12 +[pretty] + fixes = Fixes: %h (\"%s\") diff --git a/.screenrc b/.screenrc new file mode 100644 index 0000000..7eaa4e8 --- /dev/null +++ b/.screenrc @@ -0,0 +1,8 @@ +# Fill a status line on bottom of the screen +startup_message off +caption always "%{rw} * | %H * $LOGNAME | %{bw}%c %D | %{-}%-Lw%{rw}%50>%{rW}%n%f* %t %{-}%+Lw%<" +#Split the screen in a vertically way +#Vertical split temporarily disabled +#split -v +#emulate .logout message +pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended." @@ -0,0 +1,3756 @@ +# Filename: /etc/zsh/zshrc +# Purpose: config file for zsh (z shell) +# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org> +# Bug-Reports: see http://grml.org/bugs/ +# License: This file is licensed under the GPL v2. +################################################################################ +# This file is sourced only for interactive shells. It +# should contain commands to set up aliases, functions, +# options, key bindings, etc. +# +# Global Order: zshenv, zprofile, zshrc, zlogin +################################################################################ + +# USAGE +# If you are using this file as your ~/.zshrc file, please use ~/.zshrc.pre +# and ~/.zshrc.local for your own customisations. The former file is read +# before ~/.zshrc, the latter is read after it. Also, consider reading the +# refcard and the reference manual for this setup, both available from: +# <http://grml.org/zsh/> + +# Contributing: +# If you want to help to improve grml's zsh setup, clone the grml-etc-core +# repository from git.grml.org: +# git clone git://git.grml.org/grml-etc-core.git +# +# Make your changes, commit them; use 'git format-patch' to create a series +# of patches and send those to the following address via 'git send-email': +# grml-etc-core@grml.org +# +# Doing so makes sure the right people get your patches for review and +# possibly inclusion. + +# zsh-refcard-tag documentation: +# You may notice strange looking comments in this file. +# These are there for a purpose. grml's zsh-refcard can now be +# automatically generated from the contents of the actual configuration +# file. However, we need a little extra information on which comments +# and what lines of code to take into account (and for what purpose). +# +# Here is what they mean: +# +# List of tags (comment types) used: +# #a# Next line contains an important alias, that should +# be included in the grml-zsh-refcard. +# (placement tag: @@INSERT-aliases@@) +# #f# Next line contains the beginning of an important function. +# (placement tag: @@INSERT-functions@@) +# #v# Next line contains an important variable. +# (placement tag: @@INSERT-variables@@) +# #k# Next line contains an important keybinding. +# (placement tag: @@INSERT-keybindings@@) +# #d# Hashed directories list generation: +# start denotes the start of a list of 'hash -d' +# definitions. +# end denotes its end. +# (placement tag: @@INSERT-hasheddirs@@) +# #A# Abbreviation expansion list generation: +# start denotes the beginning of abbreviations. +# end denotes their end. +# Lines within this section that end in '#d .*' provide +# extra documentation to be included in the refcard. +# (placement tag: @@INSERT-abbrev@@) +# #m# This tag allows you to manually generate refcard entries +# for code lines that are hard/impossible to parse. +# Example: +# #m# k ESC-h Call the run-help function +# That would add a refcard entry in the keybindings table +# for 'ESC-h' with the given comment. +# So the syntax is: #m# <section> <argument> <comment> +# #o# This tag lets you insert entries to the 'other' hash. +# Generally, this should not be used. It is there for +# things that cannot be done easily in another way. +# (placement tag: @@INSERT-other-foobar@@) +# +# All of these tags (except for m and o) take two arguments, the first +# within the tag, the other after the tag: +# +# #<tag><section># <comment> +# +# Where <section> is really just a number, which are defined by the +# @secmap array on top of 'genrefcard.pl'. The reason for numbers +# instead of names is, that for the reader, the tag should not differ +# much from a regular comment. For zsh, it is a regular comment indeed. +# The numbers have got the following meanings: +# 0 -> "default" +# 1 -> "system" +# 2 -> "user" +# 3 -> "debian" +# 4 -> "search" +# 5 -> "shortcuts" +# 6 -> "services" +# +# So, the following will add an entry to the 'functions' table in the +# 'system' section, with a (hopefully) descriptive comment: +# #f1# Edit an alias via zle +# edalias() { +# +# It will then show up in the @@INSERT-aliases-system@@ replacement tag +# that can be found in 'grml-zsh-refcard.tex.in'. +# If the section number is omitted, the 'default' section is assumed. +# Furthermore, in 'grml-zsh-refcard.tex.in' @@INSERT-aliases@@ is +# exactly the same as @@INSERT-aliases-default@@. If you want a list of +# *all* aliases, for example, use @@INSERT-aliases-all@@. + +# zsh profiling +# just execute 'ZSH_PROFILE_RC=1 zsh' and run 'zprof' to get the details +if [[ $ZSH_PROFILE_RC -gt 0 ]] ; then + zmodload zsh/zprof +fi + +# load .zshrc.pre to give the user the chance to overwrite the defaults +[[ -r ${ZDOTDIR:-${HOME}}/.zshrc.pre ]] && source ${ZDOTDIR:-${HOME}}/.zshrc.pre + +# check for version/system +# check for versions (compatibility reasons) +function is4 () { + [[ $ZSH_VERSION == <4->* ]] && return 0 + return 1 +} + +function is41 () { + [[ $ZSH_VERSION == 4.<1->* || $ZSH_VERSION == <5->* ]] && return 0 + return 1 +} + +function is42 () { + [[ $ZSH_VERSION == 4.<2->* || $ZSH_VERSION == <5->* ]] && return 0 + return 1 +} + +function is425 () { + [[ $ZSH_VERSION == 4.2.<5->* || $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0 + return 1 +} + +function is43 () { + [[ $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0 + return 1 +} + +function is433 () { + [[ $ZSH_VERSION == 4.3.<3->* || $ZSH_VERSION == 4.<4->* \ + || $ZSH_VERSION == <5->* ]] && return 0 + return 1 +} + +function is437 () { + [[ $ZSH_VERSION == 4.3.<7->* || $ZSH_VERSION == 4.<4->* \ + || $ZSH_VERSION == <5->* ]] && return 0 + return 1 +} + +function is439 () { + [[ $ZSH_VERSION == 4.3.<9->* || $ZSH_VERSION == 4.<4->* \ + || $ZSH_VERSION == <5->* ]] && return 0 + return 1 +} + +#f1# Checks whether or not you're running grml +function isgrml () { + [[ -f /etc/grml_version ]] && return 0 + return 1 +} + +#f1# Checks whether or not you're running a grml cd +function isgrmlcd () { + [[ -f /etc/grml_cd ]] && return 0 + return 1 +} + +if isgrml ; then +#f1# Checks whether or not you're running grml-small + function isgrmlsmall () { + if [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]]; then + return 0 + fi + return 1 + } +else + function isgrmlsmall () { return 1 } +fi + +GRML_OSTYPE=$(uname -s) + +function islinux () { + [[ $GRML_OSTYPE == "Linux" ]] +} + +function isdarwin () { + [[ $GRML_OSTYPE == "Darwin" ]] +} + +function isfreebsd () { + [[ $GRML_OSTYPE == "FreeBSD" ]] +} + +function isopenbsd () { + [[ $GRML_OSTYPE == "OpenBSD" ]] +} + +function issolaris () { + [[ $GRML_OSTYPE == "SunOS" ]] +} + +#f1# are we running within an utf environment? +function isutfenv () { + case "$LANG $CHARSET $LANGUAGE" in + *utf*) return 0 ;; + *UTF*) return 0 ;; + *) return 1 ;; + esac +} + +# check for user, if not running as root set $SUDO to sudo +(( EUID != 0 )) && SUDO='sudo' || SUDO='' + +# change directory to home on first invocation of zsh +# important for rungetty -> autologin +# Thanks go to Bart Schaefer! +isgrml && function checkhome () { + if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then + export ALREADY_DID_CD_HOME=$HOME + cd + fi +} + +# check for zsh v3.1.7+ + +if ! [[ ${ZSH_VERSION} == 3.1.<7->* \ + || ${ZSH_VERSION} == 3.<2->.<->* \ + || ${ZSH_VERSION} == <4->.<->* ]] ; then + + printf '-!-\n' + printf '-!- In this configuration we try to make use of features, that only\n' + printf '-!- require version 3.1.7 of the shell; That way this setup can be\n' + printf '-!- used with a wide range of zsh versions, while using fairly\n' + printf '-!- advanced features in all supported versions.\n' + printf '-!-\n' + printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION" + printf '-!-\n' + printf '-!- While this *may* work, it might as well fail.\n' + printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n' + printf '-!-\n' + printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n' + printf '-!- If it does today, you'\''ve been lucky.\n' + printf '-!-\n' + printf '-!- Ye been warned!\n' + printf '-!-\n' + + function zstyle () { : } +fi + +# autoload wrapper - use this one instead of autoload directly +# We need to define this function as early as this, because autoloading +# 'is-at-least()' needs it. +function zrcautoload () { + emulate -L zsh + setopt extended_glob + local fdir ffile + local -i ffound + + ffile=$1 + (( ffound = 0 )) + for fdir in ${fpath} ; do + [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 )) + done + + (( ffound == 0 )) && return 1 + if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then + autoload -U ${ffile} || return 1 + else + autoload ${ffile} || return 1 + fi + return 0 +} + +# The following is the ‘add-zsh-hook’ function from zsh upstream. It is +# included here to make the setup work with older versions of zsh (prior to +# 4.3.7) in which this function had a bug that triggers annoying errors during +# shell startup. This is exactly upstreams code from f0068edb4888a4d8fe94def, +# with just a few adjustments in coding style to make the function look more +# compact. This definition can be removed as soon as we raise the minimum +# version requirement to 4.3.7 or newer. +function add-zsh-hook () { + # Add to HOOK the given FUNCTION. + # HOOK is one of chpwd, precmd, preexec, periodic, zshaddhistory, + # zshexit, zsh_directory_name (the _functions subscript is not required). + # + # With -d, remove the function from the hook instead; delete the hook + # variable if it is empty. + # + # -D behaves like -d, but pattern characters are active in the function + # name, so any matching function will be deleted from the hook. + # + # Without -d, the FUNCTION is marked for autoload; -U is passed down to + # autoload if that is given, as are -z and -k. (This is harmless if the + # function is actually defined inline.) + emulate -L zsh + local -a hooktypes + hooktypes=( + chpwd precmd preexec periodic zshaddhistory zshexit + zsh_directory_name + ) + local usage="Usage: $0 hook function\nValid hooks are:\n $hooktypes" + local opt + local -a autoopts + integer del list help + while getopts "dDhLUzk" opt; do + case $opt in + (d) del=1 ;; + (D) del=2 ;; + (h) help=1 ;; + (L) list=1 ;; + ([Uzk]) autoopts+=(-$opt) ;; + (*) return 1 ;; + esac + done + shift $(( OPTIND - 1 )) + if (( list )); then + typeset -mp "(${1:-${(@j:|:)hooktypes}})_functions" + return $? + elif (( help || $# != 2 || ${hooktypes[(I)$1]} == 0 )); then + print -u$(( 2 - help )) $usage + return $(( 1 - help )) + fi + local hook="${1}_functions" + local fn="$2" + if (( del )); then + # delete, if hook is set + if (( ${(P)+hook} )); then + if (( del == 2 )); then + set -A $hook ${(P)hook:#${~fn}} + else + set -A $hook ${(P)hook:#$fn} + fi + # unset if no remaining entries --- this can give better + # performance in some cases + if (( ! ${(P)#hook} )); then + unset $hook + fi + fi + else + if (( ${(P)+hook} )); then + if (( ${${(P)hook}[(I)$fn]} == 0 )); then + set -A $hook ${(P)hook} $fn + fi + else + set -A $hook $fn + fi + autoload $autoopts -- $fn + fi +} + +# Load is-at-least() for more precise version checks Note that this test will +# *always* fail, if the is-at-least function could not be marked for +# autoloading. +zrcautoload is-at-least || function is-at-least () { return 1 } + +# set some important options (as early as possible) + +# append history list to the history file; this is the default but we make sure +# because it's required for share_history. +setopt append_history + +# import new commands from the history file also in other zsh-session +is4 && setopt share_history + +# save each command's beginning timestamp and the duration to the history file +setopt extended_history + +# If a new command line being added to the history list duplicates an older +# one, the older command is removed from the list +is4 && setopt histignorealldups + +# remove command lines from the history list when the first character on the +# line is a space +setopt histignorespace + +# if a command is issued that can't be executed as a normal command, and the +# command is the name of a directory, perform the cd command to that directory. +setopt auto_cd + +# in order to use #, ~ and ^ for filename generation grep word +# *~(*.gz|*.bz|*.bz2|*.zip|*.Z) -> searches for word not in compressed files +# don't forget to quote '^', '~' and '#'! +setopt extended_glob + +# display PID when suspending processes as well +setopt longlistjobs + +# report the status of backgrounds jobs immediately +setopt notify + +# whenever a command completion is attempted, make sure the entire command path +# is hashed first. +setopt hash_list_all + +# not just at the end +setopt completeinword + +# Don't send SIGHUP to background processes when the shell exits. +setopt nohup + +# make cd push the old directory onto the directory stack. +setopt auto_pushd + +# avoid "beep"ing +setopt nobeep + +# don't push the same dir twice. +setopt pushd_ignore_dups + +# * shouldn't match dotfiles. ever. +setopt noglobdots + +# use zsh style word splitting +setopt noshwordsplit + +# don't error out when unset parameters are used +setopt unset + +# setting some default values +NOCOR=${NOCOR:-0} +NOMENU=${NOMENU:-0} +NOPRECMD=${NOPRECMD:-0} +COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0} +GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found} +GRML_DISPLAY_BATTERY=${GRML_DISPLAY_BATTERY:-${BATTERY:-0}} +GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1} +ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0} + +typeset -ga ls_options +typeset -ga grep_options +if ls --color=auto / >/dev/null 2>&1; then + ls_options+=( --color=auto ) +elif ls -G / >/dev/null 2>&1; then + ls_options+=( -G ) +fi +if grep --color=auto -q "a" <<< "a" >/dev/null 2>&1; then + grep_options+=( --color=auto ) +fi + +# utility functions +# this function checks if a command exists and returns either true +# or false. This avoids using 'which' and 'whence', which will +# avoid problems with aliases for which on certain weird systems. :-) +# Usage: check_com [-c|-g] word +# -c only checks for external commands +# -g does the usual tests and also checks for global aliases +function check_com () { + emulate -L zsh + local -i comonly gatoo + comonly=0 + gatoo=0 + + if [[ $1 == '-c' ]] ; then + comonly=1 + shift 1 + elif [[ $1 == '-g' ]] ; then + gatoo=1 + shift 1 + fi + + if (( ${#argv} != 1 )) ; then + printf 'usage: check_com [-c|-g] <command>\n' >&2 + return 1 + fi + + if (( comonly > 0 )) ; then + (( ${+commands[$1]} )) && return 0 + return 1 + fi + + if (( ${+commands[$1]} )) \ + || (( ${+functions[$1]} )) \ + || (( ${+aliases[$1]} )) \ + || (( ${+reswords[(r)$1]} )) ; then + return 0 + fi + + if (( gatoo > 0 )) && (( ${+galiases[$1]} )) ; then + return 0 + fi + + return 1 +} + +# creates an alias and precedes the command with +# sudo if $EUID is not zero. +function salias () { + emulate -L zsh + local only=0 ; local multi=0 + local key val + while getopts ":hao" opt; do + case $opt in + o) only=1 ;; + a) multi=1 ;; + h) + printf 'usage: salias [-hoa] <alias-expression>\n' + printf ' -h shows this help text.\n' + printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n' + printf ' be careful using this option.\n' + printf ' -o only sets an alias if a preceding sudo would be needed.\n' + return 0 + ;; + *) salias -h >&2; return 1 ;; + esac + done + shift "$((OPTIND-1))" + + if (( ${#argv} > 1 )) ; then + printf 'Too many arguments %s\n' "${#argv}" + return 1 + fi + + key="${1%%\=*}" ; val="${1#*\=}" + if (( EUID == 0 )) && (( only == 0 )); then + alias -- "${key}=${val}" + elif (( EUID > 0 )) ; then + (( multi > 0 )) && val="${val// ; / ; sudo }" + alias -- "${key}=sudo ${val}" + fi + + return 0 +} + +# Check if we can read given files and source those we can. +function xsource () { + if (( ${#argv} < 1 )) ; then + printf 'usage: xsource FILE(s)...\n' >&2 + return 1 + fi + + while (( ${#argv} > 0 )) ; do + [[ -r "$1" ]] && source "$1" + shift + done + return 0 +} + +# Check if we can read a given file and 'cat(1)' it. +function xcat () { + emulate -L zsh + if (( ${#argv} != 1 )) ; then + printf 'usage: xcat FILE\n' >&2 + return 1 + fi + + [[ -r $1 ]] && cat $1 + return 0 +} + +# Remove these functions again, they are of use only in these +# setup files. This should be called at the end of .zshrc. +function xunfunction () { + emulate -L zsh + local -a funcs + local func + funcs=(salias xcat xsource xunfunction zrcautoload zrcautozle) + for func in $funcs ; do + [[ -n ${functions[$func]} ]] \ + && unfunction $func + done + return 0 +} + +# this allows us to stay in sync with grml's zshrc and put own +# modifications in ~/.zshrc.local +function zrclocal () { + xsource "/etc/zsh/zshrc.local" + xsource "${ZDOTDIR:-${HOME}}/.zshrc.local" + return 0 +} + +# locale setup +if (( ZSH_NO_DEFAULT_LOCALE == 0 )); then + xsource "/etc/default/locale" +fi + +for var in LANG LC_ALL LC_MESSAGES ; do + [[ -n ${(P)var} ]] && export $var +done +builtin unset -v var + +# set some variables +if check_com -c vim ; then +#v# + export EDITOR=${EDITOR:-vim} +else + export EDITOR=${EDITOR:-vi} +fi + +#v# +export PAGER=${PAGER:-less} + +#v# +export MAIL=${MAIL:-/var/mail/$USER} + +# color setup for ls: +check_com -c dircolors && eval $(dircolors -b) +# color setup for ls on OS X / FreeBSD: +isdarwin && export CLICOLOR=1 +isfreebsd && export CLICOLOR=1 + +# do MacPorts setup on darwin +if isdarwin && [[ -d /opt/local ]]; then + # Note: PATH gets set in /etc/zprofile on Darwin, so this can't go into + # zshenv. + PATH="/opt/local/bin:/opt/local/sbin:$PATH" + MANPATH="/opt/local/share/man:$MANPATH" +fi +# do Fink setup on darwin +isdarwin && xsource /sw/bin/init.sh + +# load our function and completion directories +for fdir in /usr/share/grml/zsh/completion /usr/share/grml/zsh/functions; do + fpath=( ${fdir} ${fdir}/**/*(/N) ${fpath} ) +done +typeset -aU ffiles +ffiles=(/usr/share/grml/zsh/functions/**/[^_]*[^~](N.:t)) +(( ${#ffiles} > 0 )) && autoload -U "${ffiles[@]}" +unset -v fdir ffiles + +# support colors in less +export LESS_TERMCAP_mb=$'\E[01;31m' +export LESS_TERMCAP_md=$'\E[01;31m' +export LESS_TERMCAP_me=$'\E[0m' +export LESS_TERMCAP_se=$'\E[0m' +export LESS_TERMCAP_so=$'\E[01;44;33m' +export LESS_TERMCAP_ue=$'\E[0m' +export LESS_TERMCAP_us=$'\E[01;32m' + +# mailchecks +MAILCHECK=30 + +# report about cpu-/system-/user-time of command if running longer than +# 5 seconds +REPORTTIME=5 + +# watch for everyone but me and root +watch=(notme root) + +# automatically remove duplicates from these arrays +typeset -U path PATH cdpath CDPATH fpath FPATH manpath MANPATH + +# Load a few modules +is4 && \ +for mod in parameter complist deltochar mathfunc ; do + zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :(" +done && builtin unset -v mod + +# autoload zsh modules when they are referenced +if is4 ; then + zmodload -a zsh/stat zstat + zmodload -a zsh/zpty zpty + zmodload -ap zsh/mapfile mapfile +fi + +# completion system +COMPDUMPFILE=${COMPDUMPFILE:-${ZDOTDIR:-${HOME}}/.zcompdump} +if zrcautoload compinit ; then + compinit -d ${COMPDUMPFILE} || print 'Notice: no compinit available :(' +else + print 'Notice: no compinit available :(' + function compdef { } +fi + +# completion system + +# called later (via is4 && grmlcomp) +# note: use 'zstyle' for getting current settings +# press ^xh (control-x h) for getting tags in context; ^x? (control-x ?) to run complete_debug with trace output +function grmlcomp () { + # TODO: This could use some additional information + + # Make sure the completion system is initialised + (( ${+_comps} )) || return 1 + + # allow one error for every three characters typed in approximate completer + zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )' + + # don't complete backup files as executables + zstyle ':completion:*:complete:-command-::commands' ignored-patterns '(aptitude-*|*\~)' + + # start menu completion only if it could find no unambiguous initial string + zstyle ':completion:*:correct:*' insert-unambiguous true + zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}' + zstyle ':completion:*:correct:*' original true + + # activate color-completion + zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS} + + # format on completion + zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}' + + # automatically complete 'cd -<tab>' and 'cd -<ctrl-d>' with menu + # zstyle ':completion:*:*:cd:*:directory-stack' menu yes select + + # insert all expansions for expand completer + zstyle ':completion:*:expand:*' tag-order all-expansions + zstyle ':completion:*:history-words' list false + + # activate menu + zstyle ':completion:*:history-words' menu yes + + # ignore duplicate entries + zstyle ':completion:*:history-words' remove-all-dups yes + zstyle ':completion:*:history-words' stop yes + + # match uppercase from lowercase + zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}' + + # separate matches into groups + zstyle ':completion:*:matches' group 'yes' + zstyle ':completion:*' group-name '' + + if [[ "$NOMENU" -eq 0 ]] ; then + # if there are more than 5 options allow selecting from a menu + zstyle ':completion:*' menu select=5 + else + # don't use any menus at all + setopt no_auto_menu + fi + + zstyle ':completion:*:messages' format '%d' + zstyle ':completion:*:options' auto-description '%d' + + # describe options in full + zstyle ':completion:*:options' description 'yes' + + # on processes completion complete all user processes + zstyle ':completion:*:processes' command 'ps -au$USER' + + # offer indexes before parameters in subscripts + zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters + + # provide verbose completion information + zstyle ':completion:*' verbose true + + # recent (as of Dec 2007) zsh versions are able to provide descriptions + # for commands (read: 1st word in the line) that it will list for the user + # to choose from. The following disables that, because it's not exactly fast. + zstyle ':completion:*:-command-:*:' verbose false + + # set format for warnings + zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d' + + # define files to ignore for zcompile + zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)' + zstyle ':completion:correct:' prompt 'correct to: %e' + + # Ignore completion functions for commands you don't have: + zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*' + + # Provide more processes in completion of programs like killall: + zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq' + + # complete manual by their section + zstyle ':completion:*:manuals' separate-sections true + zstyle ':completion:*:manuals.*' insert-sections true + zstyle ':completion:*:man:*' menu yes select + + # Search path for sudo completion + zstyle ':completion:*:sudo:*' command-path /usr/local/sbin \ + /usr/local/bin \ + /usr/sbin \ + /usr/bin \ + /sbin \ + /bin \ + /usr/X11R6/bin + + # provide .. as a completion + zstyle ':completion:*' special-dirs .. + + # run rehash on completion so new installed program are found automatically: + function _force_rehash () { + (( CURRENT == 1 )) && rehash + return 1 + } + + ## correction + # some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it + if [[ "$NOCOR" -gt 0 ]] ; then + zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _files _ignored + setopt nocorrect + else + # try to be smart about when to use what completer... + setopt correct + zstyle -e ':completion:*' completer ' + if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]] ; then + _last_try="$HISTNO$BUFFER$CURSOR" + reply=(_complete _match _ignored _prefix _files) + else + if [[ $words[1] == (rm|mv) ]] ; then + reply=(_complete _files) + else + reply=(_oldlist _expand _force_rehash _complete _ignored _correct _approximate _files) + fi + fi' + fi + + # command for process lists, the local web server details and host completion + zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html' + + # Some functions, like _apt and _dpkg, are very slow. We can use a cache in + # order to speed things up + if [[ ${GRML_COMP_CACHING:-yes} == yes ]]; then + GRML_COMP_CACHE_DIR=${GRML_COMP_CACHE_DIR:-${ZDOTDIR:-$HOME}/.cache} + if [[ ! -d ${GRML_COMP_CACHE_DIR} ]]; then + command mkdir -p "${GRML_COMP_CACHE_DIR}" + fi + zstyle ':completion:*' use-cache yes + zstyle ':completion:*:complete:*' cache-path "${GRML_COMP_CACHE_DIR}" + fi + + # host completion + if is42 ; then + [[ -r ~/.ssh/config ]] && _ssh_config_hosts=(${${(s: :)${(ps:\t:)${${(@M)${(f)"$(<$HOME/.ssh/config)"}:#Host *}#Host }}}:#*[*?]*}) || _ssh_config_hosts=() + [[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=() + [[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=() + else + _ssh_config_hosts=() + _ssh_hosts=() + _etc_hosts=() + fi + hosts=( + $(hostname) + "$_ssh_config_hosts[@]" + "$_ssh_hosts[@]" + "$_etc_hosts[@]" + localhost + ) + zstyle ':completion:*:hosts' hosts $hosts + # TODO: so, why is this here? + # zstyle '*' hosts $hosts + + # use generic completion system for programs not yet defined; (_gnu_generic works + # with commands that provide a --help option with "standard" gnu-like output.) + for compcom in cp deborphan df feh fetchipac gpasswd head hnb ipacsum mv \ + pal stow uname ; do + [[ -z ${_comps[$compcom]} ]] && compdef _gnu_generic ${compcom} + done; unset compcom + + # see upgrade function in this file + compdef _hosts upgrade +} + +# Keyboard setup: The following is based on the same code, we wrote for +# debian's setup. It ensures the terminal is in the right mode, when zle is +# active, so the values from $terminfo are valid. Therefore, this setup should +# work on all systems, that have support for `terminfo'. It also requires the +# zsh in use to have the `zsh/terminfo' module built. +# +# If you are customising your `zle-line-init()' or `zle-line-finish()' +# functions, make sure you call the following utility functions in there: +# +# - zle-line-init(): zle-smkx +# - zle-line-finish(): zle-rmkx + +# Use emacs-like key bindings by default: +bindkey -e + +# Custom widgets: + +## beginning-of-line OR beginning-of-buffer OR beginning of history +## by: Bart Schaefer <schaefer@brasslantern.com>, Bernhard Tittelbach +function beginning-or-end-of-somewhere () { + local hno=$HISTNO + if [[ ( "${LBUFFER[-1]}" == $'\n' && "${WIDGET}" == beginning-of* ) || \ + ( "${RBUFFER[1]}" == $'\n' && "${WIDGET}" == end-of* ) ]]; then + zle .${WIDGET:s/somewhere/buffer-or-history/} "$@" + else + zle .${WIDGET:s/somewhere/line-hist/} "$@" + if (( HISTNO != hno )); then + zle .${WIDGET:s/somewhere/buffer-or-history/} "$@" + fi + fi +} +zle -N beginning-of-somewhere beginning-or-end-of-somewhere +zle -N end-of-somewhere beginning-or-end-of-somewhere + +# add a command line to the shells history without executing it +function commit-to-history () { + print -s ${(z)BUFFER} + zle send-break +} +zle -N commit-to-history + +# only slash should be considered as a word separator: +function slash-backward-kill-word () { + local WORDCHARS="${WORDCHARS:s@/@}" + # zle backward-word + zle backward-kill-word +} +zle -N slash-backward-kill-word + +# a generic accept-line wrapper + +# This widget can prevent unwanted autocorrections from command-name +# to _command-name, rehash automatically on enter and call any number +# of builtin and user-defined widgets in different contexts. +# +# For a broader description, see: +# <http://bewatermyfriend.org/posts/2007/12-26.11-50-38-tooltime.html> +# +# The code is imported from the file 'zsh/functions/accept-line' from +# <http://ft.bewatermyfriend.org/comp/zsh/zsh-dotfiles.tar.bz2>, which +# distributed under the same terms as zsh itself. + +# A newly added command will may not be found or will cause false +# correction attempts, if you got auto-correction set. By setting the +# following style, we force accept-line() to rehash, if it cannot +# find the first word on the command line in the $command[] hash. +zstyle ':acceptline:*' rehash true + +function Accept-Line () { + setopt localoptions noksharrays + local -a subs + local -xi aldone + local sub + local alcontext=${1:-$alcontext} + + zstyle -a ":acceptline:${alcontext}" actions subs + + (( ${#subs} < 1 )) && return 0 + + (( aldone = 0 )) + for sub in ${subs} ; do + [[ ${sub} == 'accept-line' ]] && sub='.accept-line' + zle ${sub} + + (( aldone > 0 )) && break + done +} + +function Accept-Line-getdefault () { + emulate -L zsh + local default_action + + zstyle -s ":acceptline:${alcontext}" default_action default_action + case ${default_action} in + ((accept-line|)) + printf ".accept-line" + ;; + (*) + printf ${default_action} + ;; + esac +} + +function Accept-Line-HandleContext () { + zle Accept-Line + + default_action=$(Accept-Line-getdefault) + zstyle -T ":acceptline:${alcontext}" call_default \ + && zle ${default_action} +} + +function accept-line () { + setopt localoptions noksharrays + local -a cmdline + local -x alcontext + local buf com fname format msg default_action + + alcontext='default' + buf="${BUFFER}" + cmdline=(${(z)BUFFER}) + com="${cmdline[1]}" + fname="_${com}" + + Accept-Line 'preprocess' + + zstyle -t ":acceptline:${alcontext}" rehash \ + && [[ -z ${commands[$com]} ]] \ + && rehash + + if [[ -n ${com} ]] \ + && [[ -n ${reswords[(r)$com]} ]] \ + || [[ -n ${aliases[$com]} ]] \ + || [[ -n ${functions[$com]} ]] \ + || [[ -n ${builtins[$com]} ]] \ + || [[ -n ${commands[$com]} ]] ; then + + # there is something sensible to execute, just do it. + alcontext='normal' + Accept-Line-HandleContext + + return + fi + + if [[ -o correct ]] \ + || [[ -o correctall ]] \ + && [[ -n ${functions[$fname]} ]] ; then + + # nothing there to execute but there is a function called + # _command_name; a completion widget. Makes no sense to + # call it on the commandline, but the correct{,all} options + # will ask for it nevertheless, so warn the user. + if [[ ${LASTWIDGET} == 'accept-line' ]] ; then + # Okay, we warned the user before, he called us again, + # so have it his way. + alcontext='force' + Accept-Line-HandleContext + + return + fi + + if zstyle -t ":acceptline:${alcontext}" nocompwarn ; then + alcontext='normal' + Accept-Line-HandleContext + else + # prepare warning message for the user, configurable via zstyle. + zstyle -s ":acceptline:${alcontext}" compwarnfmt msg + + if [[ -z ${msg} ]] ; then + msg="%c will not execute and completion %f exists." + fi + + zformat -f msg "${msg}" "c:${com}" "f:${fname}" + + zle -M -- "${msg}" + fi + return + elif [[ -n ${buf//[$' \t\n']##/} ]] ; then + # If we are here, the commandline contains something that is not + # executable, which is neither subject to _command_name correction + # and is not empty. might be a variable assignment + alcontext='misc' + Accept-Line-HandleContext + + return + fi + + # If we got this far, the commandline only contains whitespace, or is empty. + alcontext='empty' + Accept-Line-HandleContext +} + +zle -N accept-line +zle -N Accept-Line +zle -N Accept-Line-HandleContext + +# power completion / abbreviation expansion / buffer expansion +# see http://zshwiki.org/home/examples/zleiab for details +# less risky than the global aliases but powerful as well +# just type the abbreviation key and afterwards 'ctrl-x .' to expand it +declare -A abk +setopt extendedglob +setopt interactivecomments +abk=( +# key # value (#d additional doc string) +#A# start + '...' '../..' + '....' '../../..' + 'BG' '& exit' + 'C' '| wc -l' + 'G' '|& grep '${grep_options:+"${grep_options[*]}"} + 'H' '| head' + 'Hl' ' --help |& less -r' #d (Display help in pager) + 'L' '| less' + 'LL' '|& less -r' + 'M' '| most' + 'N' '&>/dev/null' #d (No Output) + 'R' '| tr A-z N-za-m' #d (ROT13) + 'SL' '| sort | less' + 'S' '| sort -u' + 'T' '| tail' + 'V' '|& vim -' +#A# end + 'co' './configure && make && sudo make install' +) + +function zleiab () { + emulate -L zsh + setopt extendedglob + local MATCH + + LBUFFER=${LBUFFER%%(#m)[.\-+:|_a-zA-Z0-9]#} + LBUFFER+=${abk[$MATCH]:-$MATCH} +} + +zle -N zleiab + +function help-show-abk () { + zle -M "$(print "Available abbreviations for expansion:"; print -a -C 2 ${(kv)abk})" +} + +zle -N help-show-abk + +# press "ctrl-x d" to insert the actual date in the form yyyy-mm-dd +function insert-datestamp () { LBUFFER+=${(%):-'%D{%Y-%m-%d}'}; } +zle -N insert-datestamp + +# press esc-m for inserting last typed word again (thanks to caphuso!) +function insert-last-typed-word () { zle insert-last-word -- 0 -1 }; +zle -N insert-last-typed-word; + +function grml-zsh-fg () { + if (( ${#jobstates} )); then + zle .push-input + [[ -o hist_ignore_space ]] && BUFFER=' ' || BUFFER='' + BUFFER="${BUFFER}fg" + zle .accept-line + else + zle -M 'No background jobs. Doing nothing.' + fi +} +zle -N grml-zsh-fg + +# run command line as user root via sudo: +function sudo-command-line () { + [[ -z $BUFFER ]] && zle up-history + if [[ $BUFFER != sudo\ * ]]; then + BUFFER="sudo $BUFFER" + CURSOR=$(( CURSOR+5 )) + fi +} +zle -N sudo-command-line + +### jump behind the first word on the cmdline. +### useful to add options. +function jump_after_first_word () { + local words + words=(${(z)BUFFER}) + + if (( ${#words} <= 1 )) ; then + CURSOR=${#BUFFER} + else + CURSOR=${#${words[1]}} + fi +} +zle -N jump_after_first_word + +#f5# Create directory under cursor or the selected area +function inplaceMkDirs () { + # Press ctrl-xM to create the directory under the cursor or the selected area. + # To select an area press ctrl-@ or ctrl-space and use the cursor. + # Use case: you type "mv abc ~/testa/testb/testc/" and remember that the + # directory does not exist yet -> press ctrl-XM and problem solved + local PATHTOMKDIR + if ((REGION_ACTIVE==1)); then + local F=$MARK T=$CURSOR + if [[ $F -gt $T ]]; then + F=${CURSOR} + T=${MARK} + fi + # get marked area from buffer and eliminate whitespace + PATHTOMKDIR=${BUFFER[F+1,T]%%[[:space:]]##} + PATHTOMKDIR=${PATHTOMKDIR##[[:space:]]##} + else + local bufwords iword + bufwords=(${(z)LBUFFER}) + iword=${#bufwords} + bufwords=(${(z)BUFFER}) + PATHTOMKDIR="${(Q)bufwords[iword]}" + fi + [[ -z "${PATHTOMKDIR}" ]] && return 1 + PATHTOMKDIR=${~PATHTOMKDIR} + if [[ -e "${PATHTOMKDIR}" ]]; then + zle -M " path already exists, doing nothing" + else + zle -M "$(mkdir -p -v "${PATHTOMKDIR}")" + zle end-of-line + fi +} + +zle -N inplaceMkDirs + +#v1# set number of lines to display per page +HELP_LINES_PER_PAGE=20 +#v1# set location of help-zle cache file +HELP_ZLE_CACHE_FILE=~/.cache/zsh_help_zle_lines.zsh +# helper function for help-zle, actually generates the help text +function help_zle_parse_keybindings () { + emulate -L zsh + setopt extendedglob + unsetopt ksharrays #indexing starts at 1 + + #v1# choose files that help-zle will parse for keybindings + ((${+HELPZLE_KEYBINDING_FILES})) || HELPZLE_KEYBINDING_FILES=( /etc/zsh/zshrc ~/.zshrc.pre ~/.zshrc ~/.zshrc.local ) + + if [[ -r $HELP_ZLE_CACHE_FILE ]]; then + local load_cache=0 + local f + for f ($HELPZLE_KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1 + [[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return + fi + + #fill with default keybindings, possibly to be overwriten in a file later + #Note that due to zsh inconsistency on escaping assoc array keys, we encase the key in '' which we will remove later + local -A help_zle_keybindings + help_zle_keybindings['<Ctrl>@']="set MARK" + help_zle_keybindings['<Ctrl>x<Ctrl>j']="vi-join lines" + help_zle_keybindings['<Ctrl>x<Ctrl>b']="jump to matching brace" + help_zle_keybindings['<Ctrl>x<Ctrl>u']="undo" + help_zle_keybindings['<Ctrl>_']="undo" + help_zle_keybindings['<Ctrl>x<Ctrl>f<c>']="find <c> in cmdline" + help_zle_keybindings['<Ctrl>a']="goto beginning of line" + help_zle_keybindings['<Ctrl>e']="goto end of line" + help_zle_keybindings['<Ctrl>t']="transpose charaters" + help_zle_keybindings['<Alt>t']="transpose words" + help_zle_keybindings['<Alt>s']="spellcheck word" + help_zle_keybindings['<Ctrl>k']="backward kill buffer" + help_zle_keybindings['<Ctrl>u']="forward kill buffer" + help_zle_keybindings['<Ctrl>y']="insert previously killed word/string" + help_zle_keybindings["<Alt>'"]="quote line" + help_zle_keybindings['<Alt>"']="quote from mark to cursor" + help_zle_keybindings['<Alt><arg>']="repeat next cmd/char <arg> times (<Alt>-<Alt>1<Alt>0a -> -10 times 'a')" + help_zle_keybindings['<Alt>u']="make next word Uppercase" + help_zle_keybindings['<Alt>l']="make next word lowercase" + help_zle_keybindings['<Ctrl>xd']="preview expansion under cursor" + help_zle_keybindings['<Alt>q']="push current CL into background, freeing it. Restore on next CL" + help_zle_keybindings['<Alt>.']="insert (and interate through) last word from prev CLs" + help_zle_keybindings['<Alt>,']="complete word from newer history (consecutive hits)" + help_zle_keybindings['<Alt>m']="repeat last typed word on current CL" + help_zle_keybindings['<Ctrl>v']="insert next keypress symbol literally (e.g. for bindkey)" + help_zle_keybindings['!!:n*<Tab>']="insert last n arguments of last command" + help_zle_keybindings['!!:n-<Tab>']="insert arguments n..N-2 of last command (e.g. mv s s d)" + help_zle_keybindings['<Alt>h']="show help/manpage for current command" + + #init global variables + unset help_zle_lines help_zle_sln + typeset -g -a help_zle_lines + typeset -g help_zle_sln=1 + + local k v f cline + local lastkeybind_desc contents #last description starting with #k# that we found + local num_lines_elapsed=0 #number of lines between last description and keybinding + #search config files in the order they a called (and thus the order in which they overwrite keybindings) + for f in $HELPZLE_KEYBINDING_FILES; do + [[ -r "$f" ]] || continue #not readable ? skip it + contents="$(<$f)" + for cline in "${(f)contents}"; do + #zsh pattern: matches lines like: #k# .............. + if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then + lastkeybind_desc="$match[*]" + num_lines_elapsed=0 + #zsh pattern: matches lines that set a keybinding using bind2map, bindkey or compdef -k + # ignores lines that are commentend out + # grabs first in '' or "" enclosed string with length between 1 and 6 characters + elif [[ "$cline" == [^#]#(bind2maps[[:space:]](*)-s|bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then + #description prevously found ? description not more than 2 lines away ? keybinding not empty ? + if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then + #substitute keybinding string with something readable + k=${${${${${${${match[1]/\\e\^h/<Alt><BS>}/\\e\^\?/<Alt><BS>}/\\e\[5~/<PageUp>}/\\e\[6~/<PageDown>}//(\\e|\^\[)/<Alt>}//\^/<Ctrl>}/3~/<Alt><Del>} + #put keybinding in assoc array, possibly overwriting defaults or stuff found in earlier files + #Note that we are extracting the keybinding-string including the quotes (see Note at beginning) + help_zle_keybindings[${k}]=$lastkeybind_desc + fi + lastkeybind_desc="" + else + ((num_lines_elapsed++)) + fi + done + done + unset contents + #calculate length of keybinding column + local kstrlen=0 + for k (${(k)help_zle_keybindings[@]}) ((kstrlen < ${#k})) && kstrlen=${#k} + #convert the assoc array into preformated lines, which we are able to sort + for k v in ${(kv)help_zle_keybindings[@]}; do + #pad keybinding-string to kstrlen chars and remove outermost characters (i.e. the quotes) + help_zle_lines+=("${(r:kstrlen:)k[2,-2]}${v}") + done + #sort lines alphabetically + help_zle_lines=("${(i)help_zle_lines[@]}") + [[ -d ${HELP_ZLE_CACHE_FILE:h} ]] || mkdir -p "${HELP_ZLE_CACHE_FILE:h}" + echo "help_zle_lines=(${(q)help_zle_lines[@]})" >| $HELP_ZLE_CACHE_FILE + zcompile $HELP_ZLE_CACHE_FILE +} +typeset -g help_zle_sln +typeset -g -a help_zle_lines + +# Provides (partially autogenerated) help on keybindings and the zsh line editor +function help-zle () { + emulate -L zsh + unsetopt ksharrays #indexing starts at 1 + #help lines already generated ? no ? then do it + [[ ${+functions[help_zle_parse_keybindings]} -eq 1 ]] && {help_zle_parse_keybindings && unfunction help_zle_parse_keybindings} + #already displayed all lines ? go back to the start + [[ $help_zle_sln -gt ${#help_zle_lines} ]] && help_zle_sln=1 + local sln=$help_zle_sln + #note that help_zle_sln is a global var, meaning we remember the last page we viewed + help_zle_sln=$((help_zle_sln + HELP_LINES_PER_PAGE)) + zle -M "${(F)help_zle_lines[sln,help_zle_sln-1]}" +} +zle -N help-zle + +## complete word from currently visible Screen or Tmux buffer. +if check_com -c screen || check_com -c tmux; then + function _complete_screen_display () { + [[ "$TERM" != "screen" ]] && return 1 + + local TMPFILE=$(mktemp) + local -U -a _screen_display_wordlist + trap "rm -f $TMPFILE" EXIT + + # fill array with contents from screen hardcopy + if ((${+TMUX})); then + #works, but crashes tmux below version 1.4 + #luckily tmux -V option to ask for version, was also added in 1.4 + tmux -V &>/dev/null || return + tmux -q capture-pane \; save-buffer -b 0 $TMPFILE \; delete-buffer -b 0 + else + screen -X hardcopy $TMPFILE + # screen sucks, it dumps in latin1, apparently always. so recode it + # to system charset + check_com recode && recode latin1 $TMPFILE + fi + _screen_display_wordlist=( ${(QQ)$(<$TMPFILE)} ) + # remove PREFIX to be completed from that array + _screen_display_wordlist[${_screen_display_wordlist[(i)$PREFIX]}]="" + compadd -a _screen_display_wordlist + } + #m# k CTRL-x\,\,\,S Complete word from GNU screen buffer + bindkey -r "^xS" + compdef -k _complete_screen_display complete-word '^xS' +fi + +# Load a few more functions and tie them to widgets, so they can be bound: + +function zrcautozle () { + emulate -L zsh + local fnc=$1 + zrcautoload $fnc && zle -N $fnc +} + +function zrcgotwidget () { + (( ${+widgets[$1]} )) +} + +function zrcgotkeymap () { + [[ -n ${(M)keymaps:#$1} ]] +} + +zrcautozle insert-files +zrcautozle edit-command-line +zrcautozle insert-unicode-char +if zrcautoload history-search-end; then + zle -N history-beginning-search-backward-end history-search-end + zle -N history-beginning-search-forward-end history-search-end +fi +zle -C hist-complete complete-word _generic +zstyle ':completion:hist-complete:*' completer _history + +# The actual terminal setup hooks and bindkey-calls: + +# An array to note missing features to ease diagnosis in case of problems. +typeset -ga grml_missing_features + +function zrcbindkey () { + if (( ARGC )) && zrcgotwidget ${argv[-1]}; then + bindkey "$@" + fi +} + +function bind2maps () { + local i sequence widget + local -a maps + + while [[ "$1" != "--" ]]; do + maps+=( "$1" ) + shift + done + shift + + if [[ "$1" == "-s" ]]; then + shift + sequence="$1" + else + sequence="${key[$1]}" + fi + widget="$2" + + [[ -z "$sequence" ]] && return 1 + + for i in "${maps[@]}"; do + zrcbindkey -M "$i" "$sequence" "$widget" + done +} + +if (( ${+terminfo[smkx]} )) && (( ${+terminfo[rmkx]} )); then + function zle-smkx () { + emulate -L zsh + printf '%s' ${terminfo[smkx]} + } + function zle-rmkx () { + emulate -L zsh + printf '%s' ${terminfo[rmkx]} + } + function zle-line-init () { + zle-smkx + } + function zle-line-finish () { + zle-rmkx + } + zle -N zle-line-init + zle -N zle-line-finish +else + for i in {s,r}mkx; do + (( ${+terminfo[$i]} )) || grml_missing_features+=($i) + done + unset i +fi + +typeset -A key +key=( + Home "${terminfo[khome]}" + End "${terminfo[kend]}" + Insert "${terminfo[kich1]}" + Delete "${terminfo[kdch1]}" + Up "${terminfo[kcuu1]}" + Down "${terminfo[kcud1]}" + Left "${terminfo[kcub1]}" + Right "${terminfo[kcuf1]}" + PageUp "${terminfo[kpp]}" + PageDown "${terminfo[knp]}" + BackTab "${terminfo[kcbt]}" +) + +# Guidelines for adding key bindings: +# +# - Do not add hardcoded escape sequences, to enable non standard key +# combinations such as Ctrl-Meta-Left-Cursor. They are not easily portable. +# +# - Adding Ctrl characters, such as '^b' is okay; note that '^b' and '^B' are +# the same key. +# +# - All keys from the $key[] mapping are obviously okay. +# +# - Most terminals send "ESC x" when Meta-x is pressed. Thus, sequences like +# '\ex' are allowed in here as well. + +bind2maps emacs -- Home beginning-of-somewhere +bind2maps viins vicmd -- Home vi-beginning-of-line +bind2maps emacs -- End end-of-somewhere +bind2maps viins vicmd -- End vi-end-of-line +bind2maps emacs viins -- Insert overwrite-mode +bind2maps vicmd -- Insert vi-insert +bind2maps emacs -- Delete delete-char +bind2maps viins vicmd -- Delete vi-delete-char +bind2maps emacs viins vicmd -- Up up-line-or-search +bind2maps emacs viins vicmd -- Down down-line-or-search +bind2maps emacs -- Left backward-char +bind2maps viins vicmd -- Left vi-backward-char +bind2maps emacs -- Right forward-char +bind2maps viins vicmd -- Right vi-forward-char +#k# Perform abbreviation expansion +bind2maps emacs viins -- -s '^x.' zleiab +#k# Display list of abbreviations that would expand +bind2maps emacs viins -- -s '^xb' help-show-abk +#k# mkdir -p <dir> from string under cursor or marked area +bind2maps emacs viins -- -s '^xM' inplaceMkDirs +#k# display help for keybindings and ZLE +bind2maps emacs viins -- -s '^xz' help-zle +#k# Insert files and test globbing +bind2maps emacs viins -- -s "^xf" insert-files +#k# Edit the current line in \kbd{\$EDITOR} +bind2maps emacs viins -- -s '\ee' edit-command-line +#k# search history backward for entry beginning with typed text +bind2maps emacs viins -- -s '^xp' history-beginning-search-backward-end +#k# search history forward for entry beginning with typed text +bind2maps emacs viins -- -s '^xP' history-beginning-search-forward-end +#k# search history backward for entry beginning with typed text +bind2maps emacs viins -- PageUp history-beginning-search-backward-end +#k# search history forward for entry beginning with typed text +bind2maps emacs viins -- PageDown history-beginning-search-forward-end +bind2maps emacs viins -- -s "^x^h" commit-to-history +#k# Kill left-side word or everything up to next slash +bind2maps emacs viins -- -s '\ev' slash-backward-kill-word +#k# Kill left-side word or everything up to next slash +bind2maps emacs viins -- -s '\e^h' slash-backward-kill-word +#k# Kill left-side word or everything up to next slash +bind2maps emacs viins -- -s '\e^?' slash-backward-kill-word +# Do history expansion on space: +bind2maps emacs viins -- -s ' ' magic-space +#k# Trigger menu-complete +bind2maps emacs viins -- -s '\ei' menu-complete # menu completion via esc-i +#k# Insert a timestamp on the command line (yyyy-mm-dd) +bind2maps emacs viins -- -s '^xd' insert-datestamp +#k# Insert last typed word +bind2maps emacs viins -- -s "\em" insert-last-typed-word +#k# A smart shortcut for \kbd{fg<enter>} +bind2maps emacs viins -- -s '^z' grml-zsh-fg +#k# prepend the current command with "sudo" +bind2maps emacs viins -- -s "^os" sudo-command-line +#k# jump to after first word (for adding options) +bind2maps emacs viins -- -s '^x1' jump_after_first_word +#k# complete word from history with menu +bind2maps emacs viins -- -s "^x^x" hist-complete + +# insert unicode character +# usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an § +# See for example http://unicode.org/charts/ for unicode characters code +#k# Insert Unicode character +bind2maps emacs viins -- -s '^xi' insert-unicode-char + +# use the new *-pattern-* widgets for incremental history search +if zrcgotwidget history-incremental-pattern-search-backward; then + for seq wid in '^r' history-incremental-pattern-search-backward \ + '^s' history-incremental-pattern-search-forward + do + bind2maps emacs viins vicmd -- -s $seq $wid + done + builtin unset -v seq wid +fi + +if zrcgotkeymap menuselect; then + #m# k Shift-tab Perform backwards menu completion + bind2maps menuselect -- BackTab reverse-menu-complete + + #k# menu selection: pick item but stay in the menu + bind2maps menuselect -- -s '\e^M' accept-and-menu-complete + # also use + and INSERT since it's easier to press repeatedly + bind2maps menuselect -- -s '+' accept-and-menu-complete + bind2maps menuselect -- Insert accept-and-menu-complete + + # accept a completion and try to complete again by using menu + # completion; very useful with completing directories + # by using 'undo' one's got a simple file browser + bind2maps menuselect -- -s '^o' accept-and-infer-next-history +fi + +# Finally, here are still a few hardcoded escape sequences; Special sequences +# like Ctrl-<Cursor-key> etc do suck a fair bit, because they are not +# standardised and most of the time are not available in a terminals terminfo +# entry. +# +# While we do not encourage adding bindings like these, we will keep these for +# backward compatibility. + +## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on +## the command line. +# URxvt sequences: +bind2maps emacs viins vicmd -- -s '\eOc' forward-word +bind2maps emacs viins vicmd -- -s '\eOd' backward-word +# These are for xterm: +bind2maps emacs viins vicmd -- -s '\e[1;5C' forward-word +bind2maps emacs viins vicmd -- -s '\e[1;5D' backward-word +## the same for alt-left-arrow and alt-right-arrow +# URxvt again: +bind2maps emacs viins vicmd -- -s '\e\e[C' forward-word +bind2maps emacs viins vicmd -- -s '\e\e[D' backward-word +# Xterm again: +bind2maps emacs viins vicmd -- -s '^[[1;3C' forward-word +bind2maps emacs viins vicmd -- -s '^[[1;3D' backward-word +# Also try ESC Left/Right: +bind2maps emacs viins vicmd -- -s '\e'${key[Right]} forward-word +bind2maps emacs viins vicmd -- -s '\e'${key[Left]} backward-word + +# autoloading + +zrcautoload zmv +zrcautoload zed + +# we don't want to quote/espace URLs on our own... +# if autoload -U url-quote-magic ; then +# zle -N self-insert url-quote-magic +# zstyle ':url-quote-magic:*' url-metas '*?[]^()~#{}=' +# else +# print 'Notice: no url-quote-magic available :(' +# fi +alias url-quote='autoload -U url-quote-magic ; zle -N self-insert url-quote-magic' + +#m# k ESC-h Call \kbd{run-help} for the 1st word on the command line +alias run-help >&/dev/null && unalias run-help +for rh in run-help{,-git,-ip,-openssl,-p4,-sudo,-svk,-svn}; do + zrcautoload $rh +done; unset rh + +# command not found handling + +(( ${COMMAND_NOT_FOUND} == 1 )) && +function command_not_found_handler () { + emulate -L zsh + if [[ -x ${GRML_ZSH_CNF_HANDLER} ]] ; then + ${GRML_ZSH_CNF_HANDLER} $1 + fi + return 1 +} + +# history + +#v# +HISTFILE=${ZDOTDIR:-${HOME}}/.zsh_history +isgrmlcd && HISTSIZE=500 || HISTSIZE=5000 +isgrmlcd && SAVEHIST=1000 || SAVEHIST=10000 # useful for setopt append_history + +# dirstack handling + +DIRSTACKSIZE=${DIRSTACKSIZE:-20} +DIRSTACKFILE=${DIRSTACKFILE:-${ZDOTDIR:-${HOME}}/.zdirs} + +if zstyle -T ':grml:chpwd:dirstack' enable; then + typeset -gaU GRML_PERSISTENT_DIRSTACK + function grml_dirstack_filter () { + local -a exclude + local filter entry + if zstyle -s ':grml:chpwd:dirstack' filter filter; then + $filter $1 && return 0 + fi + if zstyle -a ':grml:chpwd:dirstack' exclude exclude; then + for entry in "${exclude[@]}"; do + [[ $1 == ${~entry} ]] && return 0 + done + fi + return 1 + } + + function chpwd () { + (( ZSH_SUBSHELL )) && return + (( $DIRSTACKSIZE <= 0 )) && return + [[ -z $DIRSTACKFILE ]] && return + grml_dirstack_filter $PWD && return + GRML_PERSISTENT_DIRSTACK=( + $PWD "${(@)GRML_PERSISTENT_DIRSTACK[1,$DIRSTACKSIZE]}" + ) + builtin print -l ${GRML_PERSISTENT_DIRSTACK} >! ${DIRSTACKFILE} + } + + if [[ -f ${DIRSTACKFILE} ]]; then + # Enabling NULL_GLOB via (N) weeds out any non-existing + # directories from the saved dir-stack file. + dirstack=( ${(f)"$(< $DIRSTACKFILE)"}(N) ) + # "cd -" won't work after login by just setting $OLDPWD, so + [[ -d $dirstack[1] ]] && cd -q $dirstack[1] && cd -q $OLDPWD + fi + + if zstyle -t ':grml:chpwd:dirstack' filter-on-load; then + for i in "${dirstack[@]}"; do + if ! grml_dirstack_filter "$i"; then + GRML_PERSISTENT_DIRSTACK=( + "${GRML_PERSISTENT_DIRSTACK[@]}" + $i + ) + fi + done + else + GRML_PERSISTENT_DIRSTACK=( "${dirstack[@]}" ) + fi +fi + +# directory based profiles + +if is433 ; then + +# chpwd_profiles(): Directory Profiles, Quickstart: +# +# In .zshrc.local: +# +# zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml +# zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian +# chpwd_profiles +# +# For details see the `grmlzshrc.5' manual page. +function chpwd_profiles () { + local profile context + local -i reexecute + + context=":chpwd:profiles:$PWD" + zstyle -s "$context" profile profile || profile='default' + zstyle -T "$context" re-execute && reexecute=1 || reexecute=0 + + if (( ${+parameters[CHPWD_PROFILE]} == 0 )); then + typeset -g CHPWD_PROFILE + local CHPWD_PROFILES_INIT=1 + (( ${+functions[chpwd_profiles_init]} )) && chpwd_profiles_init + elif [[ $profile != $CHPWD_PROFILE ]]; then + (( ${+functions[chpwd_leave_profile_$CHPWD_PROFILE]} )) \ + && chpwd_leave_profile_${CHPWD_PROFILE} + fi + if (( reexecute )) || [[ $profile != $CHPWD_PROFILE ]]; then + (( ${+functions[chpwd_profile_$profile]} )) && chpwd_profile_${profile} + fi + + CHPWD_PROFILE="${profile}" + return 0 +} + +chpwd_functions=( ${chpwd_functions} chpwd_profiles ) + +fi # is433 + +# Prompt setup for grml: + +# set colors for use in prompts (modern zshs allow for the use of %F{red}foo%f +# in prompts to get a red "foo" embedded, but it's good to keep these for +# backwards compatibility). +if is437; then + BLUE="%F{blue}" + RED="%F{red}" + GREEN="%F{green}" + CYAN="%F{cyan}" + MAGENTA="%F{magenta}" + YELLOW="%F{yellow}" + WHITE="%F{white}" + NO_COLOR="%f" +elif zrcautoload colors && colors 2>/dev/null ; then + BLUE="%{${fg[blue]}%}" + RED="%{${fg_bold[red]}%}" + GREEN="%{${fg[green]}%}" + CYAN="%{${fg[cyan]}%}" + MAGENTA="%{${fg[magenta]}%}" + YELLOW="%{${fg[yellow]}%}" + WHITE="%{${fg[white]}%}" + NO_COLOR="%{${reset_color}%}" +else + BLUE=$'%{\e[1;34m%}' + RED=$'%{\e[1;31m%}' + GREEN=$'%{\e[1;32m%}' + CYAN=$'%{\e[1;36m%}' + WHITE=$'%{\e[1;37m%}' + MAGENTA=$'%{\e[1;35m%}' + YELLOW=$'%{\e[1;33m%}' + NO_COLOR=$'%{\e[0m%}' +fi + +# First, the easy ones: PS2..4: + +# secondary prompt, printed when the shell needs more information to complete a +# command. +PS2='\`%_> ' +# selection prompt used within a select loop. +PS3='?# ' +# the execution trace prompt (setopt xtrace). default: '+%N:%i>' +PS4='+%N:%i:%_> ' + +# Some additional features to use with our prompt: +# +# - battery status +# - debian_chroot +# - vcs_info setup and version specific fixes + +# display battery status on right side of prompt using 'GRML_DISPLAY_BATTERY=1' in .zshrc.pre + +function battery () { +if [[ $GRML_DISPLAY_BATTERY -gt 0 ]] ; then + if islinux ; then + batterylinux + elif isopenbsd ; then + batteryopenbsd + elif isfreebsd ; then + batteryfreebsd + elif isdarwin ; then + batterydarwin + else + #not yet supported + GRML_DISPLAY_BATTERY=0 + fi +fi +} + +function batterylinux () { +GRML_BATTERY_LEVEL='' +local batteries bat capacity +batteries=( /sys/class/power_supply/BAT*(N) ) +if (( $#batteries > 0 )) ; then + for bat in $batteries ; do + if [[ -e $bat/capacity ]]; then + capacity=$(< $bat/capacity) + else + typeset -F energy_full=$(< $bat/energy_full) + typeset -F energy_now=$(< $bat/energy_now) + typeset -i capacity=$(( 100 * $energy_now / $energy_full)) + fi + case $(< $bat/status) in + Charging) + GRML_BATTERY_LEVEL+=" ^" + ;; + Discharging) + if (( capacity < 20 )) ; then + GRML_BATTERY_LEVEL+=" !v" + else + GRML_BATTERY_LEVEL+=" v" + fi + ;; + *) # Full, Unknown + GRML_BATTERY_LEVEL+=" =" + ;; + esac + GRML_BATTERY_LEVEL+="${capacity}%%" + done +fi +} + +function batteryopenbsd () { +GRML_BATTERY_LEVEL='' +local bat batfull batwarn batnow num +for num in 0 1 ; do + bat=$(sysctl -n hw.sensors.acpibat${num} 2>/dev/null) + if [[ -n $bat ]]; then + batfull=${"$(sysctl -n hw.sensors.acpibat${num}.amphour0)"%% *} + batwarn=${"$(sysctl -n hw.sensors.acpibat${num}.amphour1)"%% *} + batnow=${"$(sysctl -n hw.sensors.acpibat${num}.amphour3)"%% *} + case "$(sysctl -n hw.sensors.acpibat${num}.raw0)" in + *" discharging"*) + if (( batnow < batwarn )) ; then + GRML_BATTERY_LEVEL+=" !v" + else + GRML_BATTERY_LEVEL+=" v" + fi + ;; + *" charging"*) + GRML_BATTERY_LEVEL+=" ^" + ;; + *) + GRML_BATTERY_LEVEL+=" =" + ;; + esac + GRML_BATTERY_LEVEL+="${$(( 100 * batnow / batfull ))%%.*}%%" + fi +done +} + +function batteryfreebsd () { +GRML_BATTERY_LEVEL='' +local num +local -A table +for num in 0 1 ; do + table=( ${=${${${${${(M)${(f)"$(acpiconf -i $num 2>&1)"}:#(State|Remaining capacity):*}%%( ##|%)}//:[ $'\t']##/@}// /-}//@/ }} ) + if [[ -n $table ]] && [[ $table[State] != "not-present" ]] ; then + case $table[State] in + *discharging*) + if (( $table[Remaining-capacity] < 20 )) ; then + GRML_BATTERY_LEVEL+=" !v" + else + GRML_BATTERY_LEVEL+=" v" + fi + ;; + *charging*) + GRML_BATTERY_LEVEL+=" ^" + ;; + *) + GRML_BATTERY_LEVEL+=" =" + ;; + esac + GRML_BATTERY_LEVEL+="$table[Remaining-capacity]%%" + fi +done +} + +function batterydarwin () { +GRML_BATTERY_LEVEL='' +local -a table +table=( ${$(pmset -g ps)[(w)7,8]%%(\%|);} ) +if [[ -n $table[2] ]] ; then + case $table[2] in + charging) + GRML_BATTERY_LEVEL+=" ^" + ;; + discharging) + if (( $table[1] < 20 )) ; then + GRML_BATTERY_LEVEL+=" !v" + else + GRML_BATTERY_LEVEL+=" v" + fi + ;; + *) + GRML_BATTERY_LEVEL+=" =" + ;; + esac + GRML_BATTERY_LEVEL+="$table[1]%%" +fi +} + +# set variable debian_chroot if running in a chroot with /etc/debian_chroot +if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then + debian_chroot=$(</etc/debian_chroot) +fi + +# gather version control information for inclusion in a prompt + +if zrcautoload vcs_info; then + # `vcs_info' in zsh versions 4.3.10 and below have a broken `_realpath' + # function, which can cause a lot of trouble with our directory-based + # profiles. So: + if [[ ${ZSH_VERSION} == 4.3.<-10> ]] ; then + function VCS_INFO_realpath () { + setopt localoptions NO_shwordsplit chaselinks + ( builtin cd -q $1 2> /dev/null && pwd; ) + } + fi + + zstyle ':vcs_info:*' max-exports 2 + + if [[ -o restricted ]]; then + zstyle ':vcs_info:*' enable NONE + fi +fi + +typeset -A grml_vcs_coloured_formats +typeset -A grml_vcs_plain_formats + +grml_vcs_plain_formats=( + format "(%s%)-[%b] " "zsh: %r" + actionformat "(%s%)-[%b|%a] " "zsh: %r" + rev-branchformat "%b:%r" +) + +grml_vcs_coloured_formats=( + format "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR} " + actionformat "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} " + rev-branchformat "%b${RED}:${YELLOW}%r" +) + +typeset GRML_VCS_COLOUR_MODE=xxx + +function grml_vcs_info_toggle_colour () { + emulate -L zsh + if [[ $GRML_VCS_COLOUR_MODE == plain ]]; then + grml_vcs_info_set_formats coloured + else + grml_vcs_info_set_formats plain + fi + return 0 +} + +function grml_vcs_info_set_formats () { + emulate -L zsh + #setopt localoptions xtrace + local mode=$1 AF F BF + if [[ $mode == coloured ]]; then + AF=${grml_vcs_coloured_formats[actionformat]} + F=${grml_vcs_coloured_formats[format]} + BF=${grml_vcs_coloured_formats[rev-branchformat]} + GRML_VCS_COLOUR_MODE=coloured + else + AF=${grml_vcs_plain_formats[actionformat]} + F=${grml_vcs_plain_formats[format]} + BF=${grml_vcs_plain_formats[rev-branchformat]} + GRML_VCS_COLOUR_MODE=plain + fi + + zstyle ':vcs_info:*' actionformats "$AF" "zsh: %r" + zstyle ':vcs_info:*' formats "$F" "zsh: %r" + zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "$BF" + return 0 +} + +# Change vcs_info formats for the grml prompt. The 2nd format sets up +# $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title. +if [[ "$TERM" == dumb ]] ; then + grml_vcs_info_set_formats plain +else + grml_vcs_info_set_formats coloured +fi + +# Now for the fun part: The grml prompt themes in `promptsys' mode of operation + +# This actually defines three prompts: +# +# - grml +# - grml-large +# - grml-chroot +# +# They all share the same code and only differ with respect to which items they +# contain. The main source of documentation is the `prompt_grml_help' function +# below, which gets called when the user does this: prompt -h grml + +function prompt_grml_help () { + <<__EOF0__ + prompt grml + + This is the prompt as used by the grml-live system <http://grml.org>. It is + a rather simple one-line prompt, that by default looks something like this: + + <user>@<host> <current-working-directory>[ <vcs_info-data>]% + + The prompt itself integrates with zsh's prompt themes system (as you are + witnessing right now) and is configurable to a certain degree. In + particular, these aspects are customisable: + + - The items used in the prompt (e.g. you can remove \`user' from + the list of activated items, which will cause the user name to + be omitted from the prompt string). + + - The attributes used with the items are customisable via strings + used before and after the actual item. + + The available items are: at, battery, change-root, date, grml-chroot, + history, host, jobs, newline, path, percent, rc, rc-always, sad-smiley, + shell-level, time, user, vcs + + The actual configuration is done via zsh's \`zstyle' mechanism. The + context, that is used while looking up styles is: + + ':prompt:grml:<left-or-right>:<subcontext>' + + Here <left-or-right> is either \`left' or \`right', signifying whether the + style should affect the left or the right prompt. <subcontext> is either + \`setup' or 'items:<item>', where \`<item>' is one of the available items. + + The styles: + + - use-rprompt (boolean): If \`true' (the default), print a sad smiley + in $RPROMPT if the last command a returned non-successful error code. + (This in only valid if <left-or-right> is "right"; ignored otherwise) + + - items (list): The list of items used in the prompt. If \`vcs' is + present in the list, the theme's code invokes \`vcs_info' + accordingly. Default (left): rc change-root user at host path vcs + percent; Default (right): sad-smiley + + - strip-sensitive-characters (boolean): If the \`prompt_subst' option + is active in zsh, the shell performs lots of expansions on prompt + variable strings, including command substitution. So if you don't + control where some of your prompt strings is coming from, this is + an exploitable weakness. Grml's zsh setup does not set this option + and it is off in the shell in zsh-mode by default. If it *is* turned + on however, this style becomes active, and there are two flavours of + it: On per default is a global variant in the '*:setup' context. This + strips characters after the whole prompt string was constructed. There + is a second variant in the '*:items:<item>', that is off by default. + It allows fine grained control over which items' data is stripped. + The characters that are stripped are: \$ and \`. + + Available styles in 'items:<item>' are: pre, post. These are strings that + are inserted before (pre) and after (post) the item in question. Thus, the + following would cause the user name to be printed in red instead of the + default blue: + + zstyle ':prompt:grml:*:items:user' pre '%F{red}' + + Note, that the \`post' style may remain at its default value, because its + default value is '%f', which turns the foreground text attribute off (which + is exactly, what is still required with the new \`pre' value). +__EOF0__ +} + +function prompt_grml-chroot_help () { + <<__EOF0__ + prompt grml-chroot + + This is a variation of the grml prompt, see: prompt -h grml + + The main difference is the default value of the \`items' style. The rest + behaves exactly the same. Here are the defaults for \`grml-chroot': + + - left: grml-chroot user at host path percent + - right: (empty list) +__EOF0__ +} + +function prompt_grml-large_help () { + <<__EOF0__ + prompt grml-large + + This is a variation of the grml prompt, see: prompt -h grml + + The main difference is the default value of the \`items' style. In + particular, this theme uses _two_ lines instead of one with the plain + \`grml' theme. The rest behaves exactly the same. Here are the defaults + for \`grml-large': + + - left: rc jobs history shell-level change-root time date newline user + at host path vcs percent + - right: sad-smiley +__EOF0__ +} + +function grml_prompt_setup () { + emulate -L zsh + autoload -Uz vcs_info + # The following autoload is disabled for now, since this setup includes a + # static version of the ‘add-zsh-hook’ function above. It needs to be + # reenabled as soon as that static definition is removed again. + #autoload -Uz add-zsh-hook + add-zsh-hook precmd prompt_$1_precmd +} + +function prompt_grml_setup () { + grml_prompt_setup grml +} + +function prompt_grml-chroot_setup () { + grml_prompt_setup grml-chroot +} + +function prompt_grml-large_setup () { + grml_prompt_setup grml-large +} + +# These maps define default tokens and pre-/post-decoration for items to be +# used within the themes. All defaults may be customised in a context sensitive +# matter by using zsh's `zstyle' mechanism. +typeset -gA grml_prompt_pre_default \ + grml_prompt_post_default \ + grml_prompt_token_default \ + grml_prompt_token_function + +grml_prompt_pre_default=( + at '' + battery ' ' + change-root '' + date '%F{blue}' + grml-chroot '%F{red}' + history '%F{green}' + host '' + jobs '%F{cyan}' + newline '' + path '%B' + percent '' + rc '%B%F{red}' + rc-always '' + sad-smiley '' + shell-level '%F{red}' + time '%F{blue}' + user '%B%F{blue}' + vcs '' +) + +grml_prompt_post_default=( + at '' + battery '' + change-root '' + date '%f' + grml-chroot '%f ' + history '%f' + host '' + jobs '%f' + newline '' + path '%b' + percent '' + rc '%f%b' + rc-always '' + sad-smiley '' + shell-level '%f' + time '%f' + user '%f%b' + vcs '' +) + +grml_prompt_token_default=( + at '@' + battery 'GRML_BATTERY_LEVEL' + change-root 'debian_chroot' + date '%D{%Y-%m-%d}' + grml-chroot 'GRML_CHROOT' + history '{history#%!} ' + host '%m ' + jobs '[%j running job(s)] ' + newline $'\n' + path '%40<..<%~%<< ' + percent '%# ' + rc '%(?..%? )' + rc-always '%?' + sad-smiley '%(?..:()' + shell-level '%(3L.+ .)' + time '%D{%H:%M:%S} ' + user '%n' + vcs '0' +) + +function grml_theme_has_token () { + if (( ARGC != 1 )); then + printf 'usage: grml_theme_has_token <name>\n' + return 1 + fi + (( ${+grml_prompt_token_default[$1]} )) +} + +function GRML_theme_add_token_usage () { + <<__EOF0__ + Usage: grml_theme_add_token <name> [-f|-i] <token/function> [<pre> <post>] + + <name> is the name for the newly added token. If the \`-f' or \`-i' options + are used, <token/function> is the name of the function (see below for + details). Otherwise it is the literal token string to be used. <pre> and + <post> are optional. + + Options: + + -f <function> Use a function named \`<function>' each time the token + is to be expanded. + + -i <function> Use a function named \`<function>' to initialise the + value of the token _once_ at runtime. + + The functions are called with one argument: the token's new name. The + return value is expected in the \$REPLY parameter. The use of these + options is mutually exclusive. + + There is a utility function \`grml_theme_has_token', which you can use + to test if a token exists before trying to add it. This can be a guard + for situations in which a \`grml_theme_add_token' call may happen more + than once. + + Example: + + To add a new token \`day' that expands to the current weekday in the + current locale in green foreground colour, use this: + + grml_theme_add_token day '%D{%A}' '%F{green}' '%f' + + Another example would be support for \$VIRTUAL_ENV: + + function virtual_env_prompt () { + REPLY=\${VIRTUAL_ENV+\${VIRTUAL_ENV:t} } + } + grml_theme_add_token virtual-env -f virtual_env_prompt + + After that, you will be able to use a changed \`items' style to + assemble your prompt. +__EOF0__ +} + +function grml_theme_add_token () { + emulate -L zsh + local name token pre post + local -i init funcall + + if (( ARGC == 0 )); then + GRML_theme_add_token_usage + return 0 + fi + + init=0 + funcall=0 + pre='' + post='' + name=$1 + shift + if [[ $1 == '-f' ]]; then + funcall=1 + shift + elif [[ $1 == '-i' ]]; then + init=1 + shift + fi + + if (( ARGC == 0 )); then + printf ' +grml_theme_add_token: No token-string/function-name provided!\n\n' + GRML_theme_add_token_usage + return 1 + fi + token=$1 + shift + if (( ARGC != 0 && ARGC != 2 )); then + printf ' +grml_theme_add_token: <pre> and <post> need to by specified _both_!\n\n' + GRML_theme_add_token_usage + return 1 + fi + if (( ARGC )); then + pre=$1 + post=$2 + shift 2 + fi + + if grml_theme_has_token $name; then + printf ' +grml_theme_add_token: Token `%s'\'' exists! Giving up!\n\n' $name + GRML_theme_add_token_usage + return 2 + fi + if (( init )); then + $token $name + token=$REPLY + fi + grml_prompt_pre_default[$name]=$pre + grml_prompt_post_default[$name]=$post + if (( funcall )); then + grml_prompt_token_function[$name]=$token + grml_prompt_token_default[$name]=23 + else + grml_prompt_token_default[$name]=$token + fi +} + +function grml_wrap_reply () { + emulate -L zsh + local target="$1" + local new="$2" + local left="$3" + local right="$4" + + if (( ${+parameters[$new]} )); then + REPLY="${left}${(P)new}${right}" + else + REPLY='' + fi +} + +function grml_prompt_addto () { + emulate -L zsh + local target="$1" + local lr it apre apost new v REPLY + local -a items + shift + + [[ $target == PS1 ]] && lr=left || lr=right + zstyle -a ":prompt:${grmltheme}:${lr}:setup" items items || items=( "$@" ) + typeset -g "${target}=" + for it in "${items[@]}"; do + zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" pre apre \ + || apre=${grml_prompt_pre_default[$it]} + zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" post apost \ + || apost=${grml_prompt_post_default[$it]} + zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" token new \ + || new=${grml_prompt_token_default[$it]} + if (( ${+grml_prompt_token_function[$it]} )); then + ${grml_prompt_token_function[$it]} $it + else + case $it in + battery) + grml_wrap_reply $target $new '' '' + ;; + change-root) + grml_wrap_reply $target $new '(' ')' + ;; + grml-chroot) + if [[ -n ${(P)new} ]]; then + REPLY="$CHROOT" + else + REPLY='' + fi + ;; + vcs) + v="vcs_info_msg_${new}_" + if (( ! vcscalled )); then + vcs_info + vcscalled=1 + fi + if (( ${+parameters[$v]} )) && [[ -n "${(P)v}" ]]; then + REPLY="${(P)v}" + else + REPLY='' + fi + ;; + *) REPLY="$new" ;; + esac + fi + # Strip volatile characters per item. This is off by default. See the + # global stripping code a few lines below for details. + if [[ -o prompt_subst ]] && zstyle -t ":prompt:${grmltheme}:${lr}:items:$it" \ + strip-sensitive-characters + then + REPLY="${REPLY//[$\`]/}" + fi + typeset -g "${target}=${(P)target}${apre}${REPLY}${apost}" + done + + # Per default, strip volatile characters (in the prompt_subst case) + # globally. If the option is off, the style has no effect. For more + # control, this can be turned off and stripping can be configured on a + # per-item basis (see above). + if [[ -o prompt_subst ]] && zstyle -T ":prompt:${grmltheme}:${lr}:setup" \ + strip-sensitive-characters + then + typeset -g "${target}=${${(P)target}//[$\`]/}" + fi +} + +function prompt_grml_precmd () { + emulate -L zsh + local grmltheme=grml + local -a left_items right_items + left_items=(rc change-root user at host path vcs percent) + right_items=(sad-smiley) + + prompt_grml_precmd_worker +} + +function prompt_grml-chroot_precmd () { + emulate -L zsh + local grmltheme=grml-chroot + local -a left_items right_items + left_items=(grml-chroot user at host path percent) + right_items=() + + prompt_grml_precmd_worker +} + +function prompt_grml-large_precmd () { + emulate -L zsh + local grmltheme=grml-large + local -a left_items right_items + left_items=(rc jobs history shell-level change-root time date newline + user at host path vcs percent) + right_items=(sad-smiley) + + prompt_grml_precmd_worker +} + +function prompt_grml_precmd_worker () { + emulate -L zsh + local -i vcscalled=0 + + grml_prompt_addto PS1 "${left_items[@]}" + if zstyle -T ":prompt:${grmltheme}:right:setup" use-rprompt; then + grml_prompt_addto RPS1 "${right_items[@]}" + fi +} + +function grml_prompt_fallback () { + setopt prompt_subst + local p0 p1 + + p0="${RED}%(?..%? )${WHITE}${debian_chroot:+($debian_chroot)}" + p1="${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "'${vcs_info_msg_0_}'"%# " + if (( EUID == 0 )); then + PROMPT="${BLUE}${p0}${RED}${p1}" + else + PROMPT="${RED}${p0}${BLUE}${p1}" + fi +} + +if zrcautoload promptinit && promptinit 2>/dev/null ; then + # Since we define the required functions in here and not in files in + # $fpath, we need to stick the theme's name into `$prompt_themes' + # ourselves, since promptinit does not pick them up otherwise. + prompt_themes+=( grml grml-chroot grml-large ) + # Also, keep the array sorted... + prompt_themes=( "${(@on)prompt_themes}" ) +else + print 'Notice: no promptinit available :(' + grml_prompt_fallback + function precmd () { (( ${+functions[vcs_info]} )) && vcs_info; } +fi + +if is437; then + # The prompt themes use modern features of zsh, that require at least + # version 4.3.7 of the shell. Use the fallback otherwise. + if [[ $GRML_DISPLAY_BATTERY -gt 0 ]]; then + zstyle ':prompt:grml:right:setup' items sad-smiley battery + add-zsh-hook precmd battery + fi + if [[ "$TERM" == dumb ]] ; then + zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" pre '' + zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" post ' ' + for i in rc user path jobs history date time shell-level; do + zstyle ":prompt:grml(|-large|-chroot):*:items:$i" pre '' + zstyle ":prompt:grml(|-large|-chroot):*:items:$i" post '' + done + unset i + zstyle ':prompt:grml(|-large|-chroot):right:setup' use-rprompt false + elif (( EUID == 0 )); then + zstyle ':prompt:grml(|-large|-chroot):*:items:user' pre '%B%F{red}' + fi + + # Finally enable one of the prompts. + if [[ -n $GRML_CHROOT ]]; then + prompt grml-chroot + elif [[ $GRMLPROMPT -gt 0 ]]; then + prompt grml-large + else + prompt grml + fi +else + grml_prompt_fallback + function precmd () { (( ${+functions[vcs_info]} )) && vcs_info; } +fi + +# Terminal-title wizardry + +function ESC_print () { + info_print $'\ek' $'\e\\' "$@" +} +function set_title () { + info_print $'\e]0;' $'\a' "$@" +} + +function info_print () { + local esc_begin esc_end + esc_begin="$1" + esc_end="$2" + shift 2 + printf '%s' ${esc_begin} + printf '%s' "$*" + printf '%s' "${esc_end}" +} + +function grml_reset_screen_title () { + # adjust title of xterm + # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html + [[ ${NOTITLE:-} -gt 0 ]] && return 0 + case $TERM in + (xterm*|rxvt*) + set_title ${(%):-"%n@%m: %~"} + ;; + esac +} + +function grml_vcs_to_screen_title () { + if [[ $TERM == screen* ]] ; then + if [[ -n ${vcs_info_msg_1_} ]] ; then + ESC_print ${vcs_info_msg_1_} + else + ESC_print "zsh" + fi + fi +} + +function grml_maintain_name () { + # set hostname if not running on host with name 'grml' + if [[ -n "$HOSTNAME" ]] && [[ "$HOSTNAME" != $(hostname) ]] ; then + NAME="@$HOSTNAME" + fi +} + +function grml_cmd_to_screen_title () { + # get the name of the program currently running and hostname of local + # machine set screen window title if running in a screen + if [[ "$TERM" == screen* ]] ; then + local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME" + ESC_print ${CMD} + fi +} + +function grml_control_xterm_title () { + case $TERM in + (xterm*|rxvt*) + set_title "${(%):-"%n@%m:"}" "$1" + ;; + esac +} + +# The following autoload is disabled for now, since this setup includes a +# static version of the ‘add-zsh-hook’ function above. It needs to be +# reenabled as soon as that static definition is removed again. +#zrcautoload add-zsh-hook || add-zsh-hook () { :; } +if [[ $NOPRECMD -eq 0 ]]; then + add-zsh-hook precmd grml_reset_screen_title + add-zsh-hook precmd grml_vcs_to_screen_title + add-zsh-hook preexec grml_maintain_name + add-zsh-hook preexec grml_cmd_to_screen_title + if [[ $NOTITLE -eq 0 ]]; then + add-zsh-hook preexec grml_control_xterm_title + fi +fi + +# 'hash' some often used directories +#d# start +hash -d deb=/var/cache/apt/archives +hash -d doc=/usr/share/doc +hash -d linux=/lib/modules/$(command uname -r)/build/ +hash -d log=/var/log +hash -d slog=/var/log/syslog +hash -d src=/usr/src +hash -d www=/var/www +#d# end + +# some aliases +if check_com -c screen ; then + if [[ $UID -eq 0 ]] ; then + if [[ -r /etc/grml/screenrc ]]; then + alias screen='screen -c /etc/grml/screenrc' + fi + elif [[ ! -r $HOME/.screenrc ]] ; then + if [[ -r /etc/grml/screenrc_grml ]]; then + alias screen='screen -c /etc/grml/screenrc_grml' + else + if [[ -r /etc/grml/screenrc ]]; then + alias screen='screen -c /etc/grml/screenrc' + fi + fi + fi +fi + +# do we have GNU ls with color-support? +if [[ "$TERM" != dumb ]]; then + #a1# List files with colors (\kbd{ls \ldots}) + alias ls="command ls ${ls_options:+${ls_options[*]}}" + #a1# List all files, with colors (\kbd{ls -la \ldots}) + alias la="command ls -la ${ls_options:+${ls_options[*]}}" + #a1# List files with long colored list, without dotfiles (\kbd{ls -l \ldots}) + alias ll="command ls -l ${ls_options:+${ls_options[*]}}" + #a1# List files with long colored list, human readable sizes (\kbd{ls -hAl \ldots}) + alias lh="command ls -hAl ${ls_options:+${ls_options[*]}}" + #a1# List files with long colored list, append qualifier to filenames (\kbd{ls -l \ldots})\\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...) + alias l="command ls -l ${ls_options:+${ls_options[*]}}" +else + alias la='command ls -la' + alias ll='command ls -l' + alias lh='command ls -hAl' + alias l='command ls -l' +fi + +if [[ -r /proc/mdstat ]]; then + alias mdstat='cat /proc/mdstat' +fi + +alias ...='cd ../../' + +# generate alias named "$KERNELVERSION-reboot" so you can use boot with kexec: +if [[ -x /sbin/kexec ]] && [[ -r /proc/cmdline ]] ; then + alias "$(uname -r)-reboot"="kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)"" +fi + +# see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details +alias term2iso="echo 'Setting terminal to iso mode' ; print -n '\e%@'" +alias term2utf="echo 'Setting terminal to utf-8 mode'; print -n '\e%G'" + +# make sure it is not assigned yet +[[ -n ${aliases[utf2iso]} ]] && unalias utf2iso +function utf2iso () { + if isutfenv ; then + local ENV + for ENV in $(env | command grep -i '.utf') ; do + eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')" + done + fi +} + +# make sure it is not assigned yet +[[ -n ${aliases[iso2utf]} ]] && unalias iso2utf +function iso2utf () { + if ! isutfenv ; then + local ENV + for ENV in $(env | command grep -i '\.iso') ; do + eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')" + done + fi +} + +# especially for roadwarriors using GNU screen and ssh: +if ! check_com asc &>/dev/null ; then + function asc () { autossh -t "$@" 'screen -RdU' } + compdef asc=ssh +fi + +#f1# Hints for the use of zsh on grml +function zsh-help () { + print "$bg[white]$fg[black] +zsh-help - hints for use of zsh on grml +=======================================$reset_color" + + print ' +Main configuration of zsh happens in /etc/zsh/zshrc. +That file is part of the package grml-etc-core, if you want to +use them on a non-grml-system just get the tar.gz from +http://deb.grml.org/ or (preferably) get it from the git repository: + + http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc + +This version of grml'\''s zsh setup does not use skel/.zshrc anymore. +The file is still there, but it is empty for backwards compatibility. + +For your own changes use these two files: + $HOME/.zshrc.pre + $HOME/.zshrc.local + +The former is sourced very early in our zshrc, the latter is sourced +very lately. + +System wide configuration without touching configuration files of grml +can take place in /etc/zsh/zshrc.local. + +For information regarding zsh start at http://grml.org/zsh/ + +Take a look at grml'\''s zsh refcard: +% xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz) + +Check out the main zsh refcard: +% '$BROWSER' http://www.bash2zsh.com/zsh_refcard/refcard.pdf + +And of course visit the zsh-lovers: +% man zsh-lovers + +You can adjust some options through environment variables when +invoking zsh without having to edit configuration files. +Basically meant for bash users who are not used to the power of +the zsh yet. :) + + "NOCOR=1 zsh" => deactivate automatic correction + "NOMENU=1 zsh" => do not use auto menu completion + (note: use ctrl-d for completion instead!) + "NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title) + "NOTITLE=1 zsh" => disable setting the title of xterms without disabling + preexec() and precmd() completely + "GRML_DISPLAY_BATTERY=1 zsh" + => activate battery status on right side of prompt (WIP) + "COMMAND_NOT_FOUND=1 zsh" + => Enable a handler if an external command was not found + The command called in the handler can be altered by setting + the GRML_ZSH_CNF_HANDLER variable, the default is: + "/usr/share/command-not-found/command-not-found" + +A value greater than 0 is enables a feature; a value equal to zero +disables it. If you like one or the other of these settings, you can +add them to ~/.zshrc.pre to ensure they are set when sourcing grml'\''s +zshrc.' + + print " +$bg[white]$fg[black] +Please report wishes + bugs to the grml-team: http://grml.org/bugs/ +Enjoy your grml system with the zsh!$reset_color" +} + +# debian stuff +if [[ -r /etc/debian_version ]] ; then + if [[ -z "$GRML_NO_APT_ALIASES" ]]; then + #a3# Execute \kbd{apt-cache search} + alias acs='apt-cache search' + #a3# Execute \kbd{apt-cache show} + alias acsh='apt-cache show' + #a3# Execute \kbd{apt-cache policy} + alias acp='apt-cache policy' + if check_com -c apt ; then + #a3# Execute \kbd{apt dist-upgrade} + salias adg="apt dist-upgrade" + #a3# Execute \kbd{apt upgrade} + salias ag="apt upgrade" + #a3# Execute \kbd{apt install} + salias agi="apt install" + #a3# Execute \kbd{apt-get update} + salias au="apt update" + else + salias adg="apt-get dist-upgrade" + salias ag="apt-get upgrade" + salias agi="apt-get install" + salias au="apt-get update" + fi + #a3# Execute \kbd{aptitude install} + salias ati="aptitude install" + #a3# Execute \kbd{aptitude update ; aptitude safe-upgrade} + salias -a up="aptitude update ; aptitude safe-upgrade" + #a3# Execute \kbd{dpkg-buildpackage} + alias dbp='dpkg-buildpackage' + #a3# Execute \kbd{grep-excuses} + alias ge='grep-excuses' + fi + + # get a root shell as normal user in live-cd mode: + if isgrmlcd && [[ $UID -ne 0 ]] ; then + alias su="sudo su" + fi + +fi + +# use /var/log/syslog iff present, fallback to journalctl otherwise +if [ -e /var/log/syslog ] ; then + #a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog || journalctl} + salias llog="$PAGER /var/log/syslog" # take a look at the syslog + #a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog || journalctl} + salias tlog="tail -f /var/log/syslog" # follow the syslog +elif check_com -c journalctl ; then + salias llog="journalctl" + salias tlog="journalctl -f" +fi + +# sort installed Debian-packages by size +if check_com -c dpkg-query ; then + #a3# List installed Debian-packages sorted by size + alias debs-by-size="dpkg-query -Wf 'x \${Installed-Size} \${Package} \${Status}\n' | sed -ne '/^x /d' -e '/^x \(.*\) install ok installed$/s//\1/p' | sort -nr" +fi + +# if cdrecord is a symlink (to wodim) or isn't present at all warn: +if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then + if check_com -c wodim; then + function cdrecord () { + <<__EOF0__ +cdrecord is not provided under its original name by Debian anymore. +See #377109 in the BTS of Debian for more details. + +Please use the wodim binary instead +__EOF0__ + return 1 + } + fi +fi + +if isgrmlcd; then + # No core dumps: important for a live-cd-system + limit -s core 0 +fi + +# grmlstuff +function grmlstuff () { +# people should use 'grml-x'! + if check_com -c 915resolution; then + function 855resolution () { + echo "Please use 915resolution as resolution modifying tool for Intel \ +graphic chipset." + return -1 + } + fi + + #a1# Output version of running grml + alias grml-version='cat /etc/grml_version' + + if check_com -c grml-debootstrap ; then + function debian2hd () { + echo "Installing debian to harddisk is possible by using grml-debootstrap." + return 1 + } + fi +} + +# now run the functions +isgrml && checkhome +is4 && isgrml && grmlstuff +is4 && grmlcomp + +# keephack +is4 && xsource "/etc/zsh/keephack" + +# wonderful idea of using "e" glob qualifier by Peter Stephenson +# You use it as follows: +# $ NTREF=/reference/file +# $ ls -l *(e:nt:) +# This lists all the files in the current directory newer than the reference file. +# You can also specify the reference file inline; note quotes: +# $ ls -l *(e:'nt ~/.zshenv':) +is4 && function nt () { + if [[ -n $1 ]] ; then + local NTREF=${~1} + fi + [[ $REPLY -nt $NTREF ]] +} + +# shell functions + +#f1# Reload an autoloadable function +function freload () { while (( $# )); do; unfunction $1; autoload -U $1; shift; done } +compdef _functions freload + +# +# Usage: +# +# e.g.: a -> b -> c -> d .... +# +# sll a +# +# +# if parameter is given with leading '=', lookup $PATH for parameter and resolve that +# +# sll =java +# +# Note: limit for recursive symlinks on linux: +# http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/fs/namei.c?id=refs/heads/master#l808 +# This limits recursive symlink follows to 8, +# while limiting consecutive symlinks to 40. +# +# When resolving and displaying information about symlinks, no check is made +# that the displayed information does make any sense on your OS. +# We leave that decission to the user. +# +# The zstat module is used to detect symlink loops. zstat is available since zsh4. +# With an older zsh you will need to abort with <C-c> in that case. +# When a symlink loop is detected, a warning ist printed and further processing is stopped. +# +# Module zstat is loaded by default in grml zshrc, no extra action needed for that. +# +# Known bugs: +# If you happen to come accross a symlink that points to a destination on an other partition +# with the same inode number, that will be marked as symlink loop though it is not. +# Two hints for this situation: +# I) Play lottery the same day, as you seem to be rather lucky right now. +# II) Send patches. +# +# return status: +# 0 upon success +# 1 file/dir not accesible +# 2 symlink loop detected +# +#f1# List symlinks in detail (more detailed version of 'readlink -f', 'whence -s' and 'namei -l') +function sll () { + if [[ -z ${1} ]] ; then + printf 'Usage: %s <symlink(s)>\n' "${0}" + return 1 + fi + + local file jumpd curdir + local -i 10 RTN LINODE i + local -a SEENINODES + curdir="${PWD}" + RTN=0 + + for file in "${@}" ; do + SEENINODES=() + ls -l "${file:a}" || RTN=1 + + while [[ -h "$file" ]] ; do + if is4 ; then + LINODE=$(zstat -L +inode "${file}") + for i in ${SEENINODES} ; do + if (( ${i} == ${LINODE} )) ; then + builtin cd -q "${curdir}" + print 'link loop detected, aborting!' + return 2 + fi + done + SEENINODES+=${LINODE} + fi + jumpd="${file:h}" + file="${file:t}" + + if [[ -d ${jumpd} ]] ; then + builtin cd -q "${jumpd}" || RTN=1 + fi + file=$(readlink "$file") + + jumpd="${file:h}" + file="${file:t}" + + if [[ -d ${jumpd} ]] ; then + builtin cd -q "${jumpd}" || RTN=1 + fi + + ls -l "${PWD}/${file}" || RTN=1 + done + shift 1 + if (( ${#} >= 1 )) ; then + print "" + fi + builtin cd -q "${curdir}" + done + return ${RTN} +} + +# TODO: Is it supported to use pager settings like this? +# PAGER='less -Mr' - If so, the use of $PAGER here needs fixing +# with respect to wordsplitting. (ie. ${=PAGER}) +if check_com -c $PAGER ; then + #f3# View Debian's changelog of given package(s) + function dchange () { + emulate -L zsh + [[ -z "$1" ]] && printf 'Usage: %s <package_name(s)>\n' "$0" && return 1 + + local package + for package in "$@" ; do + if [[ -r /usr/share/doc/${package}/changelog.Debian.gz ]] ; then + $PAGER /usr/share/doc/${package}/changelog.Debian.gz + elif [[ -r /usr/share/doc/${package}/changelog.gz ]] ; then + $PAGER /usr/share/doc/${package}/changelog.gz + elif [[ -r /usr/share/doc/${package}/changelog ]] ; then + $PAGER /usr/share/doc/${package}/changelog + else + if check_com -c aptitude ; then + echo "No changelog for package $package found, using aptitude to retrieve it." + aptitude changelog "$package" + elif check_com -c apt-get ; then + echo "No changelog for package $package found, using apt-get to retrieve it." + apt-get changelog "$package" + else + echo "No changelog for package $package found, sorry." + fi + fi + done + } + function _dchange () { _files -W /usr/share/doc -/ } + compdef _dchange dchange + + #f3# View Debian's NEWS of a given package + function dnews () { + emulate -L zsh + if [[ -r /usr/share/doc/$1/NEWS.Debian.gz ]] ; then + $PAGER /usr/share/doc/$1/NEWS.Debian.gz + else + if [[ -r /usr/share/doc/$1/NEWS.gz ]] ; then + $PAGER /usr/share/doc/$1/NEWS.gz + else + echo "No NEWS file for package $1 found, sorry." + return 1 + fi + fi + } + function _dnews () { _files -W /usr/share/doc -/ } + compdef _dnews dnews + + #f3# View Debian's copyright of a given package + function dcopyright () { + emulate -L zsh + if [[ -r /usr/share/doc/$1/copyright ]] ; then + $PAGER /usr/share/doc/$1/copyright + else + echo "No copyright file for package $1 found, sorry." + return 1 + fi + } + function _dcopyright () { _files -W /usr/share/doc -/ } + compdef _dcopyright dcopyright + + #f3# View upstream's changelog of a given package + function uchange () { + emulate -L zsh + if [[ -r /usr/share/doc/$1/changelog.gz ]] ; then + $PAGER /usr/share/doc/$1/changelog.gz + else + echo "No changelog for package $1 found, sorry." + return 1 + fi + } + function _uchange () { _files -W /usr/share/doc -/ } + compdef _uchange uchange +fi + +# zsh profiling +function profile () { + ZSH_PROFILE_RC=1 zsh "$@" +} + +#f1# Edit an alias via zle +function edalias () { + [[ -z "$1" ]] && { echo "Usage: edalias <alias_to_edit>" ; return 1 } || vared aliases'[$1]' ; +} +compdef _aliases edalias + +#f1# Edit a function via zle +function edfunc () { + [[ -z "$1" ]] && { echo "Usage: edfunc <function_to_edit>" ; return 1 } || zed -f "$1" ; +} +compdef _functions edfunc + +# use it e.g. via 'Restart apache2' +#m# f6 Start() \kbd{service \em{process}}\quad\kbd{start} +#m# f6 Restart() \kbd{service \em{process}}\quad\kbd{restart} +#m# f6 Stop() \kbd{service \em{process}}\quad\kbd{stop} +#m# f6 Reload() \kbd{service \em{process}}\quad\kbd{reload} +#m# f6 Force-Reload() \kbd{service \em{process}}\quad\kbd{force-reload} +#m# f6 Status() \kbd{service \em{process}}\quad\kbd{status} +if [[ -d /etc/init.d || -d /etc/service ]] ; then + function __start_stop () { + local action_="${1:l}" # e.g Start/Stop/Restart + local service_="$2" + local param_="$3" + + local service_target_="$(readlink /etc/init.d/$service_)" + if [[ $service_target_ == "/usr/bin/sv" ]]; then + # runit + case "${action_}" in + start) if [[ ! -e /etc/service/$service_ ]]; then + $SUDO ln -s "/etc/sv/$service_" "/etc/service/" + else + $SUDO "/etc/init.d/$service_" "${action_}" "$param_" + fi ;; + # there is no reload in runits sysv emulation + reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;; + *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;; + esac + else + # sysv/sysvinit-utils, upstart + if check_com -c service ; then + $SUDO service "$service_" "${action_}" "$param_" + else + $SUDO "/etc/init.d/$service_" "${action_}" "$param_" + fi + fi + } + + function _grmlinitd () { + local -a scripts + scripts=( /etc/init.d/*(x:t) ) + _describe "service startup script" scripts + } + + for i in Start Restart Stop Force-Reload Reload Status ; do + eval "function $i () { __start_stop $i \"\$1\" \"\$2\" ; }" + compdef _grmlinitd $i + done + builtin unset -v i +fi + +#f1# Provides useful information on globbing +function H-Glob () { + echo -e " + / directories + . plain files + @ symbolic links + = sockets + p named pipes (FIFOs) + * executable plain files (0100) + % device files (character or block special) + %b block special files + %c character special files + r owner-readable files (0400) + w owner-writable files (0200) + x owner-executable files (0100) + A group-readable files (0040) + I group-writable files (0020) + E group-executable files (0010) + R world-readable files (0004) + W world-writable files (0002) + X world-executable files (0001) + s setuid files (04000) + S setgid files (02000) + t files with the sticky bit (01000) + + print *(m-1) # Files modified up to a day ago + print *(a1) # Files accessed a day ago + print *(@) # Just symlinks + print *(Lk+50) # Files bigger than 50 kilobytes + print *(Lk-50) # Files smaller than 50 kilobytes + print **/*.c # All *.c files recursively starting in \$PWD + print **/*.c~file.c # Same as above, but excluding 'file.c' + print (foo|bar).* # Files starting with 'foo' or 'bar' + print *~*.* # All Files that do not contain a dot + chmod 644 *(.^x) # make all plain non-executable files publically readable + print -l *(.c|.h) # Lists *.c and *.h + print **/*(g:users:) # Recursively match all files that are owned by group 'users' + echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<" +} +alias help-zshglob=H-Glob + +# grep for running process, like: 'any vim' +function any () { + emulate -L zsh + unsetopt KSH_ARRAYS + if [[ -z "$1" ]] ; then + echo "any - grep for process(es) by keyword" >&2 + echo "Usage: any <keyword>" >&2 ; return 1 + else + ps xauwww | grep -i "${grep_options[@]}" "[${1[1]}]${1[2,-1]}" + fi +} + + +# After resuming from suspend, system is paging heavily, leading to very bad interactivity. +# taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt +[[ -r /proc/1/maps ]] && \ +function deswap () { + print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.' + cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/') > /dev/null + print 'Finished, running "swapoff -a; swapon -a" may also be useful.' +} + +# a wrapper for vim, that deals with title setting +# VIM_OPTIONS +# set this array to a set of options to vim you always want +# to have set when calling vim (in .zshrc.local), like: +# VIM_OPTIONS=( -p ) +# This will cause vim to send every file given on the +# commandline to be send to it's own tab (needs vim7). +if check_com vim; then + function vim () { + VIM_PLEASE_SET_TITLE='yes' command vim ${VIM_OPTIONS} "$@" + } +fi + +ssl_hashes=( sha512 sha256 sha1 md5 ) + +for sh in ${ssl_hashes}; do + eval 'ssl-cert-'${sh}'() { + emulate -L zsh + if [[ -z $1 ]] ; then + printf '\''usage: %s <file>\n'\'' "ssh-cert-'${sh}'" + return 1 + fi + openssl x509 -noout -fingerprint -'${sh}' -in $1 + }' +done; unset sh + +function ssl-cert-fingerprints () { + emulate -L zsh + local i + if [[ -z $1 ]] ; then + printf 'usage: ssl-cert-fingerprints <file>\n' + return 1 + fi + for i in ${ssl_hashes} + do ssl-cert-$i $1; + done +} + +function ssl-cert-info () { + emulate -L zsh + if [[ -z $1 ]] ; then + printf 'usage: ssl-cert-info <file>\n' + return 1 + fi + openssl x509 -noout -text -in $1 + ssl-cert-fingerprints $1 +} + +# make sure our environment is clean regarding colors +builtin unset -v BLUE RED GREEN CYAN YELLOW MAGENTA WHITE NO_COLOR + +# "persistent history" +# just write important commands you always need to $GRML_IMPORTANT_COMMANDS +# defaults for backward compatibility to ~/.important_commands +if [[ -r ~/.important_commands ]] ; then + GRML_IMPORTANT_COMMANDS=~/.important_commands +else + GRML_IMPORTANT_COMMANDS=${GRML_IMPORTANT_COMMANDS:-${ZDOTDIR:-${HOME}}/.important_commands} +fi +[[ -r ${GRML_IMPORTANT_COMMANDS} ]] && builtin fc -R ${GRML_IMPORTANT_COMMANDS} + +# load the lookup subsystem if it's available on the system +zrcautoload lookupinit && lookupinit + +# variables + +# set terminal property (used e.g. by msgid-chooser) +export COLORTERM="yes" + +# aliases + +# general +#a2# Execute \kbd{du -sch} +[[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias da='du -sch' + +# listing stuff +#a2# Execute \kbd{ls -lSrah} +alias dir="command ls -lSrah" +#a2# Only show dot-directories +alias lad='command ls -d .*(/)' +#a2# Only show dot-files +alias lsa='command ls -a .*(.)' +#a2# Only files with setgid/setuid/sticky flag +alias lss='command ls -l *(s,S,t)' +#a2# Only show symlinks +alias lsl='command ls -l *(@)' +#a2# Display only executables +alias lsx='command ls -l *(*)' +#a2# Display world-{readable,writable,executable} files +alias lsw='command ls -ld *(R,W,X.^ND/)' +#a2# Display the ten biggest files +alias lsbig="command ls -flh *(.OL[1,10])" +#a2# Only show directories +alias lsd='command ls -d *(/)' +#a2# Only show empty directories +alias lse='command ls -d *(/^F)' +#a2# Display the ten newest files +alias lsnew="command ls -rtlh *(D.om[1,10])" +#a2# Display the ten oldest files +alias lsold="command ls -rtlh *(D.Om[1,10])" +#a2# Display the ten smallest files +alias lssmall="command ls -Srl *(.oL[1,10])" +#a2# Display the ten newest directories and ten newest .directories +alias lsnewdir="command ls -rthdl *(/om[1,10]) .*(D/om[1,10])" +#a2# Display the ten oldest directories and ten oldest .directories +alias lsolddir="command ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])" + +# some useful aliases +#a2# Remove current empty directory. Execute \kbd{cd ..; rmdir \$OLDCWD} +alias rmcdir='cd ..; rmdir $OLDPWD || cd $OLDPWD' + +#a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset +alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"' +#a2# scp with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset +alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"' + +# work around non utf8 capable software in utf environment via $LANG and luit +if check_com isutfenv && check_com luit ; then + if check_com -c mrxvt ; then + isutfenv && [[ -n "$LANG" ]] && \ + alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt" + fi + + if check_com -c aterm ; then + isutfenv && [[ -n "$LANG" ]] && \ + alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm" + fi + + if check_com -c centericq ; then + isutfenv && [[ -n "$LANG" ]] && \ + alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq" + fi +fi + +# useful functions + +#f5# Backup \kbd{file_or_folder {\rm to} file_or_folder\_timestamp} +function bk () { + emulate -L zsh + local current_date=$(date -u "+%Y-%m-%dT%H:%M:%SZ") + local clean keep move verbose result all to_bk + setopt extended_glob + keep=1 + while getopts ":hacmrv" opt; do + case $opt in + a) (( all++ ));; + c) unset move clean && (( ++keep ));; + m) unset keep clean && (( ++move ));; + r) unset move keep && (( ++clean ));; + v) verbose="-v";; + h) <<__EOF0__ +bk [-hcmv] FILE [FILE ...] +bk -r [-av] [FILE [FILE ...]] +Backup a file or folder in place and append the timestamp +Remove backups of a file or folder, or all backups in the current directory + +Usage: +-h Display this help text +-c Keep the file/folder as is, create a copy backup using cp(1) (default) +-m Move the file/folder, using mv(1) +-r Remove backups of the specified file or directory, using rm(1). If none + is provided, remove all backups in the current directory. +-a Remove all (even hidden) backups. +-v Verbose + +The -c, -r and -m options are mutually exclusive. If specified at the same time, +the last one is used. + +The return code is the sum of all cp/mv/rm return codes. +__EOF0__ +return 0;; + \?) bk -h >&2; return 1;; + esac + done + shift "$((OPTIND-1))" + if (( keep > 0 )); then + if islinux || isfreebsd; then + for to_bk in "$@"; do + cp $verbose -a "${to_bk%/}" "${to_bk%/}_$current_date" + (( result += $? )) + done + else + for to_bk in "$@"; do + cp $verbose -pR "${to_bk%/}" "${to_bk%/}_$current_date" + (( result += $? )) + done + fi + elif (( move > 0 )); then + while (( $# > 0 )); do + mv $verbose "${1%/}" "${1%/}_$current_date" + (( result += $? )) + shift + done + elif (( clean > 0 )); then + if (( $# > 0 )); then + for to_bk in "$@"; do + rm $verbose -rf "${to_bk%/}"_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z + (( result += $? )) + done + else + if (( all > 0 )); then + rm $verbose -rf *_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z(D) + else + rm $verbose -rf *_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z + fi + (( result += $? )) + fi + fi + return $result +} + +#f5# cd to directoy and list files +function cl () { + emulate -L zsh + cd $1 && ls -a +} + +# smart cd function, allows switching to /etc when running 'cd /etc/fstab' +function cd () { + if (( ${#argv} == 1 )) && [[ -f ${1} ]]; then + [[ ! -e ${1:h} ]] && return 1 + print "Correcting ${1} to ${1:h}" + builtin cd ${1:h} + else + builtin cd "$@" + fi +} + +#f5# Create Directoy and \kbd{cd} to it +function mkcd () { + if (( ARGC != 1 )); then + printf 'usage: mkcd <new-directory>\n' + return 1; + fi + if [[ ! -d "$1" ]]; then + command mkdir -p "$1" + else + printf '`%s'\'' already exists: cd-ing.\n' "$1" + fi + builtin cd "$1" +} + +#f5# Create temporary directory and \kbd{cd} to it +function cdt () { + builtin cd "$(mktemp -d)" + builtin pwd +} + +#f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1 +function accessed () { + emulate -L zsh + print -l -- *(a-${1:-1}) +} + +#f5# List files which have been changed within the last {\it n} days, {\it n} defaults to 1 +function changed () { + emulate -L zsh + print -l -- *(c-${1:-1}) +} + +#f5# List files which have been modified within the last {\it n} days, {\it n} defaults to 1 +function modified () { + emulate -L zsh + print -l -- *(m-${1:-1}) +} +# modified() was named new() in earlier versions, add an alias for backwards compatibility +check_com new || alias new=modified + +# use colors when GNU grep with color-support +if (( $#grep_options > 0 )); then + o=${grep_options:+"${grep_options[*]}"} + #a2# Execute \kbd{grep -{}-color=auto} + alias grep='grep '$o + alias egrep='egrep '$o + unset o +fi + +# Translate DE<=>EN +# 'translate' looks up a word in a file with language-to-language +# translations (field separator should be " : "). A typical wordlist looks +# like the following: +# | english-word : german-translation +# It's also only possible to translate english to german but not reciprocal. +# Use the following oneliner to reverse the sort order: +# $ awk -F ':' '{ print $2" : "$1" "$3 }' \ +# /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok +#f5# Translates a word +function trans () { + emulate -L zsh + case "$1" in + -[dD]*) + translate -l de-en $2 + ;; + -[eE]*) + translate -l en-de $2 + ;; + *) + echo "Usage: $0 { -D | -E }" + echo " -D == German to English" + echo " -E == English to German" + esac +} + +# Usage: simple-extract <file> +# Using option -d deletes the original archive file. +#f5# Smart archive extractor +function simple-extract () { + emulate -L zsh + setopt extended_glob noclobber + local ARCHIVE DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD + local RC=0 + zparseopts -D -E "d=DELETE_ORIGINAL" + for ARCHIVE in "${@}"; do + case $ARCHIVE in + *(tar.bz2|tbz2|tbz)) + DECOMP_CMD="tar -xvjf -" + USES_STDIN=true + USES_STDOUT=false + ;; + *(tar.gz|tgz)) + DECOMP_CMD="tar -xvzf -" + USES_STDIN=true + USES_STDOUT=false + ;; + *(tar.xz|txz|tar.lzma)) + DECOMP_CMD="tar -xvJf -" + USES_STDIN=true + USES_STDOUT=false + ;; + *tar) + DECOMP_CMD="tar -xvf -" + USES_STDIN=true + USES_STDOUT=false + ;; + *rar) + DECOMP_CMD="unrar x" + USES_STDIN=false + USES_STDOUT=false + ;; + *lzh) + DECOMP_CMD="lha x" + USES_STDIN=false + USES_STDOUT=false + ;; + *7z) + DECOMP_CMD="7z x" + USES_STDIN=false + USES_STDOUT=false + ;; + *(zip|jar)) + DECOMP_CMD="unzip" + USES_STDIN=false + USES_STDOUT=false + ;; + *deb) + DECOMP_CMD="ar -x" + USES_STDIN=false + USES_STDOUT=false + ;; + *bz2) + DECOMP_CMD="bzip2 -d -c -" + USES_STDIN=true + USES_STDOUT=true + ;; + *(gz|Z)) + DECOMP_CMD="gzip -d -c -" + USES_STDIN=true + USES_STDOUT=true + ;; + *(xz|lzma)) + DECOMP_CMD="xz -d -c -" + USES_STDIN=true + USES_STDOUT=true + ;; + *) + print "ERROR: '$ARCHIVE' has unrecognized archive type." >&2 + RC=$((RC+1)) + continue + ;; + esac + + if ! check_com ${DECOMP_CMD[(w)1]}; then + echo "ERROR: ${DECOMP_CMD[(w)1]} not installed." >&2 + RC=$((RC+2)) + continue + fi + + GZTARGET="${ARCHIVE:t:r}" + if [[ -f $ARCHIVE ]] ; then + + print "Extracting '$ARCHIVE' ..." + if $USES_STDIN; then + if $USES_STDOUT; then + ${=DECOMP_CMD} < "$ARCHIVE" > $GZTARGET + else + ${=DECOMP_CMD} < "$ARCHIVE" + fi + else + if $USES_STDOUT; then + ${=DECOMP_CMD} "$ARCHIVE" > $GZTARGET + else + ${=DECOMP_CMD} "$ARCHIVE" + fi + fi + [[ $? -eq 0 && -n "$DELETE_ORIGINAL" ]] && rm -f "$ARCHIVE" + + elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then + if check_com curl; then + WGET_CMD="curl -L -s -o -" + elif check_com wget; then + WGET_CMD="wget -q -O -" + elif check_com fetch; then + WGET_CMD="fetch -q -o -" + else + print "ERROR: neither wget, curl nor fetch is installed" >&2 + RC=$((RC+4)) + continue + fi + print "Downloading and Extracting '$ARCHIVE' ..." + if $USES_STDIN; then + if $USES_STDOUT; then + ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} > $GZTARGET + RC=$((RC+$?)) + else + ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} + RC=$((RC+$?)) + fi + else + if $USES_STDOUT; then + ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") > $GZTARGET + else + ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") + fi + fi + + else + print "ERROR: '$ARCHIVE' is neither a valid file nor a supported URI." >&2 + RC=$((RC+8)) + fi + done + return $RC +} + +function __archive_or_uri () { + _alternative \ + 'files:Archives:_files -g "*.(#l)(tar.bz2|tbz2|tbz|tar.gz|tgz|tar.xz|txz|tar.lzma|tar|rar|lzh|7z|zip|jar|deb|bz2|gz|Z|xz|lzma)"' \ + '_urls:Remote Archives:_urls' +} + +function _simple_extract () { + _arguments \ + '-d[delete original archivefile after extraction]' \ + '*:Archive Or Uri:__archive_or_uri' +} +compdef _simple_extract simple-extract +[[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias se=simple-extract + +#f5# Change the xterm title from within GNU-screen +function xtrename () { + emulate -L zsh + if [[ $1 != "-f" ]] ; then + if [[ -z ${DISPLAY} ]] ; then + printf 'xtrename only makes sense in X11.\n' + return 1 + fi + else + shift + fi + if [[ -z $1 ]] ; then + printf 'usage: xtrename [-f] "title for xterm"\n' + printf ' renames the title of xterm from _within_ screen.\n' + printf ' also works without screen.\n' + printf ' will not work if DISPLAY is unset, use -f to override.\n' + return 0 + fi + print -n "\eP\e]0;${1}\C-G\e\\" + return 0 +} + +# Create small urls via http://goo.gl using curl(1). +# API reference: https://code.google.com/apis/urlshortener/ +function zurl () { + emulate -L zsh + setopt extended_glob + + if [[ -z $1 ]]; then + print "USAGE: zurl <URL>" + return 1 + fi + + local PN url prog api json contenttype item + local -a data + PN=$0 + url=$1 + + # Prepend 'http://' to given URL where necessary for later output. + if [[ ${url} != http(s|)://* ]]; then + url='http://'${url} + fi + + if check_com -c curl; then + prog=curl + else + print "curl is not available, but mandatory for ${PN}. Aborting." + return 1 + fi + api='https://www.googleapis.com/urlshortener/v1/url' + contenttype="Content-Type: application/json" + json="{\"longUrl\": \"${url}\"}" + data=(${(f)"$($prog --silent -H ${contenttype} -d ${json} $api)"}) + # Parse the response + for item in "${data[@]}"; do + case "$item" in + ' '#'"id":'*) + item=${item#*: \"} + item=${item%\",*} + printf '%s\n' "$item" + return 0 + ;; + esac + done + return 1 +} + +#f2# Find history events by search pattern and list them by date. +function whatwhen () { + emulate -L zsh + local usage help ident format_l format_s first_char remain first last + usage='USAGE: whatwhen [options] <searchstring> <search range>' + help='Use `whatwhen -h'\'' for further explanations.' + ident=${(l,${#${:-Usage: }},, ,)} + format_l="${ident}%s\t\t\t%s\n" + format_s="${format_l//(\\t)##/\\t}" + # Make the first char of the word to search for case + # insensitive; e.g. [aA] + first_char=[${(L)1[1]}${(U)1[1]}] + remain=${1[2,-1]} + # Default search range is `-100'. + first=${2:-\-100} + # Optional, just used for `<first> <last>' given. + last=$3 + case $1 in + ("") + printf '%s\n\n' 'ERROR: No search string specified. Aborting.' + printf '%s\n%s\n\n' ${usage} ${help} && return 1 + ;; + (-h) + printf '%s\n\n' ${usage} + print 'OPTIONS:' + printf $format_l '-h' 'show help text' + print '\f' + print 'SEARCH RANGE:' + printf $format_l "'0'" 'the whole history,' + printf $format_l '-<n>' 'offset to the current history number; (default: -100)' + printf $format_s '<[-]first> [<last>]' 'just searching within a give range' + printf '\n%s\n' 'EXAMPLES:' + printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.' + printf $format_l 'whatwhen zsh -250' + printf $format_l 'whatwhen foo 1 99' + ;; + (\?) + printf '%s\n%s\n\n' ${usage} ${help} && return 1 + ;; + (*) + # -l list results on stout rather than invoking $EDITOR. + # -i Print dates as in YYYY-MM-DD. + # -m Search for a - quoted - pattern within the history. + fc -li -m "*${first_char}${remain}*" $first $last + ;; + esac +} + +# mercurial related stuff +if check_com -c hg ; then + # gnu like diff for mercurial + # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks + #f5# GNU like diff for mercurial + function hgdi () { + emulate -L zsh + local i + for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i" + } + + # build debian package + #a2# Alias for \kbd{hg-buildpackage} + alias hbp='hg-buildpackage' + + # execute commands on the versioned patch-queue from the current repos + [[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)' + + # diffstat for specific version of a mercurial repository + # hgstat => display diffstat between last revision and tip + # hgstat 1234 => display diffstat between revision 1234 and tip + #f5# Diffstat for specific version of a mercurial repos + function hgstat () { + emulate -L zsh + [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat + } + +fi # end of check whether we have the 'hg'-executable + +# grml-small cleanups + +# The following is used to remove zsh-config-items that do not work +# in grml-small by default. +# If you do not want these adjustments (for whatever reason), set +# $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration +# sources if it is there). + +if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then + + unset "abk[V]" + unalias 'V' &> /dev/null + unfunction vman &> /dev/null + unfunction viless &> /dev/null + unfunction 2html &> /dev/null + + # manpages are not in grmlsmall + unfunction manzsh &> /dev/null + unfunction man2 &> /dev/null + +fi + +zrclocal + +## genrefcard.pl settings + +### doc strings for external functions from files +#m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values) + +### example: split functions-search 8,16,24,32 +#@# split functions-search 8 + +## END OF FILE ################################################################# +# vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4 +# Local variables: +# mode: sh +# End: |