From 9256105618b2a9d7e1eec4994a5ffddb6b1e5a7f Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Sun, 20 Mar 2016 20:57:03 +0100 Subject: doc: update with new configuration options --- doc/fastd.1 | 2 +- doc/source/manual/cmdline.rst | 6 ++--- doc/source/manual/config.rst | 54 ++++++++++++++++++++++++++++++++++++------- 3 files changed, 50 insertions(+), 12 deletions(-) (limited to 'doc') diff --git a/doc/fastd.1 b/doc/fastd.1 index 9c038b7..365f511 100644 --- a/doc/fastd.1 +++ b/doc/fastd.1 @@ -54,7 +54,7 @@ Hides IP addresses in log output. \fB\-\-hide\-mac\-addresses\fR Hides MAC addresses in log output. .TP -\fB\-\-mode\fR, \fB\-m\fR tap|tun +\fB\-\-mode\fR, \fB\-m\fR tap|multitap|tun Sets the mode of the interface; default is TAP mode. .TP \fB\-\-interface\fR, \fB\-i\fR diff --git a/doc/source/manual/cmdline.rst b/doc/source/manual/cmdline.rst index bd17249..ffc593a 100644 --- a/doc/source/manual/cmdline.rst +++ b/doc/source/manual/cmdline.rst @@ -18,12 +18,12 @@ Command line options and config files are parsed in order they are specified, so --status-socket Configures a socket to get fastd's status. ---log-level +--log-level error|warn|info|verbose|debug|debug2 Sets the stderr log level; default is info, if no alternative log destination ist configured. If logging to syslog or files is enabled, the default is not to log to stderr. ---syslog-level +--syslog-level error|warn|info|verbose|debug|debug2 Sets the log level for syslog output; default is not to use syslog. --syslog-ident @@ -38,7 +38,7 @@ Command line options and config files are parsed in order they are specified, so --config-peer-dir Loads all files from a directory as peer configs. On SIGHUP fastd will reload peer directories. ---mode, -m +--mode, -m tap|multitap|tun Sets the mode of the interface; default is TAP mode. --interface, -i diff --git a/doc/source/manual/config.rst b/doc/source/manual/config.rst index f9d874e..ea42c4e 100644 --- a/doc/source/manual/config.rst +++ b/doc/source/manual/config.rst @@ -54,8 +54,8 @@ Example config: When an address without port or with port 0 is configured, a new socket with a random port will be created for each outgoing connection. This has the side effect that the options for packet marks and interface-specific binds (except IPv6 link-local addresses) will only work with the - ``CAP_NET_ADMIN`` capability (option ``drop capabilities no`` when fastd is built with - capability support, root privileges otherwise). + ``CAP_NET_ADMIN`` capability. If fastd is built with capability support, it will automatically retain + these capabilities; otherwise, fastd must run as root. Configuring no bind address at all is equivalent to the setting ``bind any``, meaning fastd will use a random port for each outgoing connection both for IPv4 and IPv6. @@ -87,15 +87,20 @@ Example config: - ``nacl``: Use implementation from NaCl or libsodium -| ``drop capabilities yes|no|early;`` +| ``drop capabilities yes|no|early|force;`` By default, fastd switches to the configured user and/or drops its - POSIX capabilities after the on up command has been run. - When drop capabilities is set to early, the on up command - is run after the privileges have been dropped, when set to no, the POSIX capabilities - aren't dropped at all (but the user is switched after the on up command + POSIX capabilities after the on-up command has been run. + When drop capabilities is set to *early*, the on-up command + is run after the privileges have been dropped, when set to *no*, the POSIX capabilities + aren't dropped at all (but the user is switched after the on-up command has been run nevertheless). + fastd automatically detects which capabilities are required for normal operation + and retains these capabilities. This can be overridden using the *force* value + (this may make sense if persistent TUN/TAP interfaces are used which may be used + without special privileges by fastd.) + | ``forward yes|no;`` Enables or disabled forwarding packets between peers. Care must be taken not to create forwarding loops. @@ -130,6 +135,12 @@ Example config: Sets the name of the TUN/TAP interface to use; it will be set by the OS when no name is configured explicitly. + In TUN/multi-TAP mode, either peer-specific interface names need to be configured, or one + (but not both) of the following patterns must be used to set a unique interface name for each peer: + + * ``%n``: The peer's name + * ``%k``: The first 16 hex digits of the peer's public key + | ``log level fatal|error|warn|info|verbose|debug|debug2;`` Sets the default log level, meaning syslog if there is currently a level set for syslog, and stderr @@ -164,10 +175,13 @@ Example config: Sets the encryption/authentication method. See the page :doc:`methods` for more information about the supported methods. When multiple method statements are given, the first one has the highest preference. -| ``mode tap|tun;`` +| ``mode tap|multitap|tun;`` Sets the mode of the interface; the default is TAP mode. + In TAP mode, a single interface will be created for all peers, in multi-TAP and TUN mode, + each peers gets its own interface. + | ``mtu ;`` Sets the MTU; must be at least 576. You should read the page :doc:`mtu` as the default 1500 is suboptimal in most setups. @@ -189,6 +203,8 @@ Example config: until the commands have finished, while the other commands are executed asynchronously by default. This can be changed using the keywords sync and async. + All commands except pre-up and post-down may be overriden per peer group. + The following environment variables are set by fastd for all commands: * ``FASTD_PID``: fastd's PID @@ -215,6 +231,9 @@ Example config: Verify commands are executed asynchronously by default. This can be changed using the keywords sync and async. + The on-verify command my be put into a peer group to define which peer group unknown peers + are added to. This may be used to apply a peer limit only to unknown peers. + | ``packet mark ;`` Defines a packet mark to set on fastd's packets, which can be used in an ip rule. @@ -233,6 +252,13 @@ Example config: Sets the maximum number of connections for the current peer group. +| ``persist interface yes|no;`` + + If set to *no*, fastd will create peer-specific interfaces only as long as there's an + active session with the peer. Does not have an effect in TUN mode. + + By default, interfaces are persistent. + .. _option-pmtu: | ``pmtu yes|no|auto;`` @@ -283,10 +309,22 @@ Example config: Includes another configuration file. +| ``interface "";`` + + Sets the name of the peer-specific TUN/TAP interface to use. + + Does have no effect in TAP mode. + | ``key "";`` Sets the peer's public key. +| ``mtu ;`` + + Sets the MTU for a peer-specific interface; must be at least 576. + + Does have no effect in TAP mode. + | ``remote :;`` | ``remote :;`` | ``remote [ ipv4|ipv6 ] "":;`` -- cgit v1.2.3