package fastd

config fastd sample_config

	# Set to 1 to enable this instance:
	option enabled 0

	# Sets a static config file, optional
	# Options set via UCI have higher priority that statically configured ones
#	list config '/etc/fastd/sample_config/fastd.conf'

	# Configures a single static peer from a configuration file
#	list config_peer '/etc/fastd/sample_config/sample_peer.conf'

	# Sets an additional directory from which peers configurations are read
	# The peer list can be reloaded without restarting fastd
	# Peer can either be configured via UCI (see examples below) or via peer dirs
	# Can't be used in tun mode
#	list config_peer_dir '/etc/fastd/sample_config/peers'

	# Sets the log level
	# Possible values: error, warn, info, verbose, debug
	# Default: info
	option syslog_level 'info'

	# IP address and port of the local end, optional
	# 'any' can be used to bind to both IPv4 and IPv6
	# If no port is given fastd will bind to a random port
#	list bind 'any:1337'
#	list bind '0.0.0.0:1337'
#	list bind '[::]:1337'

	# "method null" uses no encryption or MAC
	# "method salsa2012+umac" uses the Salsa20/12 encryption and the UMAC message authentication code
	# See the fastd documentation for the other supported encryption methods
	list method 'salsa2012+umac'

	# "mode tap" will create an ethernet tunnel (tap device),
	# "mode tun" will create an IP tunnel (tun device).
	option mode 'tap'

	# Set the name of the tunnel interface to use
	option interface 'tap0'
#	option interface 'tun0'
#	option interface 'fastd0'

	# Sets the MTU of the tunnel interface, default is 1500
	# 1426 is a good value that avoids fragmentation for the xsalsa20-poly1305 method
	# when the tunnel uses an IPv4 connection on a line with an MTU of 1492 or higher
	option mtu 1426

	# Enables direct forwaring of packets between peers
	# WARNING: Only enable this if you know what you are doing, as this can lead to forwarding loops!
	option forward 0

	# Disable for compatiblity with fastd v10 and older
	option secure_handshakes 1

	# Set a packet mark to filter for with iptables or ip rules
#	option packet_mark 42

	# Socket to get fastd's status
#	option status_socket '/var/run/fastd-example.sock'

	# Limits the maximum number of connections, optional
#	option peer_limit 5

	# The secret key
	# A keypair can be generated with `fastd --generate-key`
	# When the corresponding public key is lost it can be recovered with `/etc/init.d/fastd show-key <config name>`
#	option secret '0000000000000000000000000000000000000000000000000000000000000000'

	# Sets the user to run fastd as. Defaults to root
#	option user 'daemon'

	# Sets the group to run fastd as. Defaults to the user's primary group
#	option group 'daemon'

	# If set to 1, the logs won't contain peers' IP addresses
#	option hide_ip_addresses '0'

	# If set to 1, the logs won't contain peers' MAC addresses
#	option hide_mac_addresses '0'

	# command to configure IP addresses etc. after the tunnel interface is up; $1 will be the interface name (optional)
#	option up ''

	# command to execute before the tunnel interface is set down; $1 will be the interface name (optional)
#	option down ''

	# commands executed by fastd ($INTERFACE can be used for the interface name; optional)
#	option on_pre_up ''
#	option on_up ''
#	option on_down ''
#	option on_post_down ''
#	option on_connect ''
#	option on_establish ''
#	option on_disestablish ''
#	option on_verify ''


config peer sample_peer

	# Set to 1 to enable this peer
	# In tap mode peers can be reloaded dynamically
	option enabled 0

	# Controls which instance this peer is associated with
	option net 'sample_config'

	# Controls which peer group this peer belongs to, optional
	# For most use cases peer groups aren't necessary
#	option group 'sample_group'

	# The peer's public key
	option key '0000000000000000000000000000000000000000000000000000000000000000'

	# A remote specification consists of an address or a hostname, and a port
	# When a hostname is given, it is recommended to specify the address family to use
	# It is possible to specify no, one or multiple remotes
	# (but all entries must designate the same host as the public key must be unique)
#	list remote '192.0.2.1:1337'
#	list remote '[2001:db8::1]:1337'
#	list remote '"example.com" port 1337'
#	list remote 'ipv4 "example.com" port 1337'
#	list remote 'ipv6 "example.com" port 1337'

	# Setting float to 1 allow incoming connections with this key from other addresses/hostnames/ports than the specified remotes
#	option float 0


config peer_group sample_group

	# Set to 1 to enable this peer group
	option enabled 0

	# Controls which instance this peer group is associated with
	# Peer groups can't be used in tun mode
	option net 'sample_config'

	# Allows configuring nested groups
#	option parent 'other_group'

	# Includes another config file inside the peer group definition
#	list config '/etc/fastd/sample_config/sample_group.conf'

	# Configures a single static peer from a configuration file
#	list config_peer '/etc/fastd/sample_config/sample_peer.conf'

	# Configures an additional peer directory for this group
#	list config_peer_dir '/etc/fastd/sample_config/peers2'

	# Methods set in the peer group override the ones configured in the parent group or globally
#	list method 'null'

	# Limits the maximum number of connections to peers in this group (optional)
#	option peer_limit 5