lolshield-matrix hinzu

5 files changed, 1176 insertions, 0 deletions

diff --git a/Matrix_9x14/cmake/modules/ArduinoProcessing.cmake b/Matrix_9x14/cmake/modules/ArduinoProcessing.cmake
new file mode 100644
index 0000000..c7a2407
--- /dev/null
+++ b/Matrix_9x14/cmake/modules/ArduinoProcessing.cmake
@@ -0,0 +1,103 @@
+# 1. Concatenate all PDE files
+# 2. Write #include "WProgram.h"
+# 3. Write prototypes
+# 4. Write original sources
+# 
+# 
+# Prefix Writer
+# 1. Scrub comments
+# 2. Optionally subsitute Unicode
+# 3. Find imports
+# 4. Find prototypes
+# 
+# Find prototypes
+# 1. Strip comments, quotes, preprocessor directives
+# 2. Collapse braches
+# 3. Regex
+
+
+set(SINGLE_QUOTES_REGEX  "('.')")
+set(DOUBLE_QUOTES_REGEX  "(\"([^\"\\\\]|\\\\.)*\")")
+set(SINGLE_COMMENT_REGEX "([ ]*//[^\n]*)")
+set(MULTI_COMMENT_REGEX  "(/[*][^/]*[*]/)")
+set(PREPROC_REGEX        "([ ]*#(\\\\[\n]|[^\n])*)")
+
+#"[\w\[\]\*]+\s+[&\[\]\*\w\s]+\([&,\[\]\*\w\s]*\)(?=\s*\{)"
+set(PROTOTPYE_REGEX      "([a-zA-Z0-9]+[ ]*)*[a-zA-Z0-9]+[ ]*\([^{]*\)[ ]*{")
+
+function(READ_SKETCHES VAR_NAME )
+    set(SKETCH_SOURCE)
+    foreach(SKETCH ${ARGN})
+        if(EXISTS ${SKETCH})
+            message(STATUS "${SKETCH}")
+            file(READ ${SKETCH} SKETCH_CONTENTS)
+            set(SKETCH_SOURCE "${SKETCH_SOURCE}\n${SKETCH_CONTENTS}")
+        else()
+            message(FATAL_ERROR "Sketch file does not exist: ${SKETCH}")
+        endif()
+    endforeach()
+    set(${VAR_NAME} "${SKETCH_SOURCE}" PARENT_SCOPE)
+endfunction()
+
+function(STRIP_SOURCES VAR_NAME SOURCES)
+    string(REGEX REPLACE "${SINGLE_QUOTES_REGEX}|${DOUBLE_QUOTES_REGEX}|${SINGLE_COMMENT_REGEX}|${MULTI_COMMENT_REGEX}|${PREPROC_REGEX}"
+                         ""
+                         SOURCES
+                         "${SOURCES}")
+    set(${VAR_NAME} "${SOURCES}" PARENT_SCOPE)
+endfunction()
+
+function(COLLAPSE_BRACES VAR_NAME SOURCES)
+    set(PARSED_SOURCES)
+    string(LENGTH "${SOURCES}" SOURCES_LENGTH)
+    math(EXPR SOURCES_LENGTH "${SOURCES_LENGTH}-1")
+
+    set(NESTING 0)
+    set(START   0)
+    foreach(INDEX RANGE ${SOURCES_LENGTH})
+        string(SUBSTRING "${SOURCES}" ${INDEX} 1 CURRENT_CHAR)
+        #message("${CURRENT_CHAR}")
+        if(CURRENT_CHAR STREQUAL "{")
+            if(NESTING EQUAL 0)
+                math(EXPR SUBLENGTH "${INDEX}-${START} +1")
+                string(SUBSTRING "${SOURCES}" ${START} ${SUBLENGTH} CURRENT_CHUNK)
+                set(PARSED_SOURCES "${PARSED_SOURCES}${CURRENT_CHUNK}")
+                #message("INDEX: ${INDEX} START: ${START} LENGTH: ${SUBLENGTH}")
+            endif()
+            math(EXPR NESTING "${NESTING}+1")
+        elseif(CURRENT_CHAR STREQUAL "}")
+            math(EXPR NESTING "${NESTING}-1")
+            if(NESTING EQUAL 0)
+                set(START ${INDEX})
+            endif()
+        endif()
+    endforeach()
+
+    math(EXPR SUBLENGTH "${SOURCES_LENGTH}-${START} +1")
+    string(SUBSTRING "${SOURCES}" ${START} ${SUBLENGTH} CURRENT_CHUNK)
+    set(PARSED_SOURCES "${PARSED_SOURCES}${CURRENT_CHUNK}")
+
+    set(${VAR_NAME} "${PARSED_SOURCES}" PARENT_SCOPE)
+endfunction()
+
+function(extract_prototypes VAR_NAME SOURCES)
+    string(REGEX MATCHALL "${PROTOTPYE_REGEX}"
+                         SOURCES
+                         "${SOURCES}")
+    set(${VAR_NAME} "${SOURCES}" PARENT_SCOPE)
+endfunction()
+
+read_sketches(SKETCH_SOURCE ${FILES})
+strip_sources(SKETCH_SOURCE "${SKETCH_SOURCE}")
+collapse_braces(SKETCH_SOURCE "${SKETCH_SOURCE}")
+extract_prototypes(SKETCH_SOURCE "${SKETCH_SOURCE}")
+
+
+
+
+message("===============")
+foreach(ENTRY ${SKETCH_SOURCE})
+    message("START]]]${ENTRY}[[[END")
+endforeach()
+message("===============")
+#message("${SKETCH_SOURCE}")
diff --git a/Matrix_9x14/cmake/modules/FindArduino.cmake b/Matrix_9x14/cmake/modules/FindArduino.cmake
new file mode 100644
index 0000000..5873735
--- /dev/null
+++ b/Matrix_9x14/cmake/modules/FindArduino.cmake
@@ -0,0 +1,978 @@
+# - Generate firmware and libraries for Arduino Devices
+# generate_arduino_firmware(TARGET_NAME)
+#        TARGET_NAME - Name of target
+# Creates a Arduino firmware target.
+#
+# The target options can be configured by setting options of
+# the following format:
+#      ${TARGET_NAME}${SUFFIX}
+# The following suffixes are availabe:
+#      _SRCS           # Sources
+#      _HDRS           # Headers
+#      _SKETCHES       # Arduino sketch files
+#      _LIBS           # Libraries to linked in
+#      _BOARD          # Board name (such as uno, mega2560, ...)
+#      _PORT           # Serial port, for upload and serial targets [OPTIONAL]
+#      _AFLAGS         # Override global Avrdude flags for target
+#      _SERIAL         # Serial command for serial target           [OPTIONAL]
+#      _NO_AUTOLIBS    # Disables Arduino library detection
+# Here is a short example for a target named test:
+#       set(test_SRCS  test.cpp)
+#       set(test_HDRS  test.h)
+#       set(test_BOARD uno)
+#    
+#       generate_arduino_firmware(test)
+#
+#
+# generate_arduino_library(TARGET_NAME)
+#        TARGET_NAME - Name of target
+# Creates a Arduino firmware target.
+#
+# The target options can be configured by setting options of
+# the following format:
+#      ${TARGET_NAME}${SUFFIX}
+# The following suffixes are availabe:
+#
+#      _SRCS           # Sources
+#      _HDRS           # Headers
+#      _LIBS           # Libraries to linked in
+#      _BOARD          # Board name (such as uno, mega2560, ...)
+#      _NO_AUTOLIBS    # Disables Arduino library detection
+# 
+# Here is a short example for a target named test:
+#       set(test_SRCS  test.cpp)
+#       set(test_HDRS  test.h)
+#       set(test_BOARD uno)
+#    
+#       generate_arduino_library(test)
+
+file(GLOB SDK_PATHS /usr/share/arduino*)
+
+find_path(ARDUINO_SDK_PATH
+          NAMES lib/version.txt hardware libraries
+		  PATH_SUFFIXES  share/arduino
+		  HINTS ${SDK_PATHS}
+          DOC "Arduino Development Kit path.")
+
+# load_board_settings()
+#
+# Load the Arduino SDK board settings from the boards.txt file.
+#
+function(LOAD_BOARD_SETTINGS)
+    load_arduino_style_settings(ARDUINO_BOARDS "${ARDUINO_BOARDS_PATH}")
+endfunction()
+
+function(LOAD_PROGRAMMERS_SETTINGS)
+    load_arduino_style_settings(ARDUINO_PROGRAMMERS "${ARDUINO_PROGRAMMERS_PATH}")
+endfunction()
+
+# print_board_list()
+#
+# Print list of detected Arduino Boards.
+function(PRINT_BOARD_LIST)
+    message(STATUS "Supported Arduino Boards:")
+    print_list(ARDUINO_BOARDS)
+    message(STATUS "")
+endfunction()
+
+# print_programmer_list()
+#
+# Print list of detected Programmers.
+function(PRINT_PROGRAMMER_LIST)
+    message(STATUS "Supported Programmers:")
+    print_list(ARDUINO_PROGRAMMERS)
+    message(STATUS "")
+endfunction()
+
+# print_programmer_settings(PROGRAMMER)
+#
+#        PROGRAMMER - programmer id
+#
+# Print the detected Programmer settings.
+#
+function(PRINT_PROGRAMMER_SETTINGS PROGRAMMER)
+    if(${PROGRAMMER}.SETTINGS)
+        message(STATUS "Programmer ${PROGRAMMER} Settings:")
+        print_settings(${PROGRAMMER})
+    endif()
+endfunction()
+
+# print_board_settings(ARDUINO_BOARD)
+#
+#        ARDUINO_BOARD - Board id
+#
+# Print the detected Arduino board settings.
+#
+function(PRINT_BOARD_SETTINGS ARDUINO_BOARD)
+    if(${ARDUINO_BOARD}.SETTINGS)
+        message(STATUS "Arduino ${ARDUINO_BOARD} Board:")
+        print_settings(${ARDUINO_BOARD})
+    endif()
+endfunction()
+
+
+
+# generate_arduino_library(TARGET_NAME)
+#
+# see documentation at top
+function(GENERATE_ARDUINO_LIBRARY TARGET_NAME)
+    load_generator_settings(${TARGET_NAME} INPUT _SRCS       # Sources
+                                                 _HDRS       # Headers
+                                                 _LIBS       # Libraries to linked in
+                                                 _BOARD)     # Board name (such as uno, mega2560, ...)
+    set(INPUT_AUTOLIBS True)
+    if(DEFINED ${TARGET_NAME}_NO_AUTOLIBS AND ${TARGET_NAME}_NO_AUTOLIBS)
+        set(INPUT_AUTOLIBS False)
+    endif()
+
+    message(STATUS "Generating ${TARGET_NAME}")
+    
+    set(ALL_LIBS)
+    set(ALL_SRCS ${INPUT_SRCS} ${INPUT_HDRS})
+
+    setup_arduino_compiler(${INPUT_BOARD})
+    setup_arduino_core(CORE_LIB ${INPUT_BOARD})
+
+    if(INPUT_AUTOLIBS)
+        setup_arduino_libraries(ALL_LIBS  ${INPUT_BOARD} "${ALL_SRCS}")
+    endif()
+
+    list(APPEND ALL_LIBS ${CORE_LIB} ${INPUT_LIBS})
+        
+    add_library(${TARGET_NAME} ${ALL_SRCS})
+    target_link_libraries(${TARGET_NAME} ${ALL_LIBS})
+endfunction()
+
+# generate_arduino_firmware(TARGET_NAME)
+#
+# see documentation at top
+function(GENERATE_ARDUINO_FIRMWARE TARGET_NAME)
+    load_generator_settings(${TARGET_NAME} INPUT _SRCS       # Sources
+                                                 _HDRS       # Headers
+                                                 _LIBS       # Libraries to linked in
+                                                 _BOARD      # Board name (such as uno, mega2560, ...)
+                                                 _PORT       # Serial port, for upload and serial targets
+                                                 _AFLAGS     # Override global Avrdude flags for target
+                                                 _SKETCHES   # Arduino sketch files
+                                                 _SERIAL)    # Serial command for serial target
+                            
+    set(INPUT_AUTOLIBS True)
+    if(DEFINED ${TARGET_NAME}_NO_AUTOLIBS AND ${TARGET_NAME}_NO_AUTOLIBS)
+        set(INPUT_AUTOLIBS False)
+    endif()
+
+    message(STATUS "Generating ${TARGET_NAME}")
+
+    set(ALL_LIBS)
+    set(ALL_SRCS ${INPUT_SRCS} ${INPUT_HDRS})
+
+    setup_arduino_compiler(${INPUT_BOARD})
+    setup_arduino_core(CORE_LIB ${INPUT_BOARD})
+
+    #setup_arduino_sketch(SKETCH_SRCS ${INPUT_SKETCHES})
+
+    if(INPUT_AUTOLIBS)
+        setup_arduino_libraries(ALL_LIBS ${INPUT_BOARD} "${ALL_SRCS}")
+    endif()
+
+    
+    list(APPEND ALL_LIBS ${CORE_LIB} ${INPUT_LIBS})
+    
+    setup_arduino_target(${TARGET_NAME} "${ALL_SRCS}" "${ALL_LIBS}")
+    
+    if(INPUT_PORT)
+        setup_arduino_upload(${INPUT_BOARD} ${TARGET_NAME} ${INPUT_PORT})
+    endif()
+    
+    if(INPUT_SERIAL)
+        setup_serial_target(${TARGET_NAME} "${INPUT_SERIAL}")
+    endif()
+endfunction()
+
+
+# load_generator_settings(TARGET_NAME PREFIX [SUFFIX_1 SUFFIX_2 .. SUFFIX_N])
+#
+#         TARGET_NAME - The base name of the user settings
+#         PREFIX      - The prefix name used for generator settings
+#         SUFFIX_XX   - List of suffixes to load
+#
+#  Loads a list of user settings into the generators scope. User settings have
+#  the following syntax:
+#
+#      ${BASE_NAME}${SUFFIX}
+#
+#  The BASE_NAME is the target name and the suffix is a specific generator settings.
+#
+#  For every user setting found a generator setting is created of the follwoing fromat:
+#
+#      ${PREFIX}${SUFFIX}
+#
+#  The purpose of loading the settings into the generator is to not modify user settings
+#  and to have a generic naming of the settings within the generator.
+#
+function(LOAD_GENERATOR_SETTINGS TARGET_NAME PREFIX)
+    foreach(GEN_SUFFIX ${ARGN})
+        if(${TARGET_NAME}${GEN_SUFFIX})
+            set(${PREFIX}${GEN_SUFFIX} ${${TARGET_NAME}${GEN_SUFFIX}} PARENT_SCOPE)
+        endif()
+    endforeach()
+endfunction()
+
+# setup_arduino_compiler(BOARD_ID)
+#
+#       BOARD_ID - The board id name
+#
+# Configures the the build settings for the specified Arduino Board.
+#
+macro(setup_arduino_compiler BOARD_ID)
+    set(BOARD_CORE ${${BOARD_ID}.build.core})
+    set(PIN_HEADER ${${BOARD_ID}.build.variant})
+    if(BOARD_CORE)
+        if(ARDUINO_SDK_VERSION MATCHES "([0-9]+)[.]([0-9]+)")
+            string(REPLACE "." "" ARDUINO_VERSION_DEFINE "${ARDUINO_SDK_VERSION}") # Normalize version (remove all periods)
+            set(ARDUINO_VERSION_DEFINE "${CMAKE_MATCH_1}")
+            if(CMAKE_MATCH_2 GREATER 10)
+                set(ARDUINO_VERSION_DEFINE "${ARDUINO_VERSION_DEFINE}${CMAKE_MATCH_2}")
+            else()
+                set(ARDUINO_VERSION_DEFINE "${ARDUINO_VERSION_DEFINE}0${CMAKE_MATCH_2}")
+            endif()
+        else()
+            set(ARDUINO_VERSION_DEFINE "00${ARDUINO_SDK_VERSION}")
+        endif()
+        set(BOARD_CORE_PATH ${ARDUINO_CORES_PATH}/${BOARD_CORE})
+        include_directories(${ARDUINO_VARIANTS_PATH}/${PIN_HEADER})
+        include_directories(${BOARD_CORE_PATH})
+        include_directories(${ARDUINO_LIBRARIES_PATH})
+        add_definitions(-DF_CPU=${${BOARD_ID}.build.f_cpu}
+                        -DARDUINO=${ARDUINO_VERSION_DEFINE}
+                        -mmcu=${${BOARD_ID}.build.mcu}
+                        )
+        set(CMAKE_EXE_LINKER_FLAGS    "${CMAKE_EXE_LINKER_FLAGS}    -mmcu=${${BOARD_ID}.build.mcu}" PARENT_SCOPE)
+        set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -mmcu=${${BOARD_ID}.build.mcu}" PARENT_SCOPE)
+        set(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -mmcu=${${BOARD_ID}.build.mcu}" PARENT_SCOPE)
+    else()
+        message(FATAL_ERROR "Invalid Arduino board ID (${BOARD_ID}), aborting.")
+    endif()
+endmacro()
+
+# setup_arduino_core(VAR_NAME BOARD_ID)
+#
+#        VAR_NAME    - Variable name that will hold the generated library name
+#        BOARD_ID    - Arduino board id
+#
+# Creates the Arduino Core library for the specified board,
+# each board gets it's own version of the library.
+#
+function(setup_arduino_core VAR_NAME BOARD_ID)
+    set(CORE_LIB_NAME ${BOARD_ID}_CORE)
+    set(BOARD_CORE ${${BOARD_ID}.build.core})
+    if(BOARD_CORE AND NOT TARGET ${CORE_LIB_NAME})
+        set(BOARD_CORE_PATH ${ARDUINO_CORES_PATH}/${BOARD_CORE})
+        find_sources(CORE_SRCS ${BOARD_CORE_PATH} True)
+        # Debian/Ubuntu fix
+        list(REMOVE_ITEM CORE_SRCS "${BOARD_CORE_PATH}/main.cxx")
+        add_library(${CORE_LIB_NAME} ${CORE_SRCS})
+        set(${VAR_NAME} ${CORE_LIB_NAME} PARENT_SCOPE)
+    endif()
+endfunction()
+
+# find_arduino_libraries(VAR_NAME SRCS)
+#
+#      VAR_NAME - Variable name which will hold the results
+#      SRCS     - Sources that will be analized
+#
+#     returns a list of paths to libraries found.
+#
+#  Finds all Arduino type libraries included in sources. Available libraries
+#  are ${ARDUINO_SDK_PATH}/libraries and ${CMAKE_CURRENT_SOURCE_DIR}.
+#
+#  A Arduino library is a folder that has the same name as the include header.
+#  For example, if we have a include "#include <LibraryName.h>" then the following
+#  directory structure is considered a Arduino library:
+#
+#     LibraryName/
+#          |- LibraryName.h
+#          `- LibraryName.c
+#
+#  If such a directory is found then all sources within that directory are considred
+#  to be part of that Arduino library.
+#
+function(find_arduino_libraries VAR_NAME SRCS)
+    set(ARDUINO_LIBS )
+    foreach(SRC ${SRCS})
+        file(STRINGS ${SRC} SRC_CONTENTS)
+        foreach(SRC_LINE ${SRC_CONTENTS})
+            if("${SRC_LINE}" MATCHES "^ *#include *[<\"](.*)[>\"]")
+                get_filename_component(INCLUDE_NAME ${CMAKE_MATCH_1} NAME_WE)
+                get_property(LIBRARY_SEARCH_PATH
+                             DIRECTORY     # Property Scope
+                             PROPERTY LINK_DIRECTORIES)
+                foreach(LIB_SEARCH_PATH ${LIBRARY_SEARCH_PATH} ${ARDUINO_LIBRARIES_PATH} ${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/libraries)
+                    if(EXISTS ${LIB_SEARCH_PATH}/${INCLUDE_NAME}/${CMAKE_MATCH_1})
+                        list(APPEND ARDUINO_LIBS ${LIB_SEARCH_PATH}/${INCLUDE_NAME})
+                        break()
+                    endif()
+                endforeach()
+            endif()
+        endforeach()
+    endforeach()
+    if(ARDUINO_LIBS)
+        list(REMOVE_DUPLICATES ARDUINO_LIBS)
+    endif()
+    set(${VAR_NAME} ${ARDUINO_LIBS} PARENT_SCOPE)
+endfunction()
+
+# setup_arduino_library(VAR_NAME BOARD_ID LIB_PATH)
+#
+#        VAR_NAME    - Vairable wich will hold the generated library names
+#        BOARD_ID    - Board name
+#        LIB_PATH    - path of the library
+#
+# Creates an Arduino library, with all it's library dependencies.
+#
+#      ${LIB_NAME}_RECURSE controls if the library will recurse
+#      when looking for source files.
+#
+
+# For known libraries can list recurse here
+set(Wire_RECURSE True)
+set(Ethernet_RECURSE True)
+function(setup_arduino_library VAR_NAME BOARD_ID LIB_PATH)
+    set(LIB_TARGETS)
+
+    get_filename_component(LIB_NAME ${LIB_PATH} NAME)
+    set(TARGET_LIB_NAME ${BOARD_ID}_${LIB_NAME})
+    if(NOT TARGET ${TARGET_LIB_NAME})
+        string(REGEX REPLACE ".*/" "" LIB_SHORT_NAME ${LIB_NAME})
+
+        # Detect if recursion is needed
+        if (NOT DEFINED ${LIB_SHORT_NAME}_RECURSE)
+            set(${LIB_SHORT_NAME}_RECURSE False)
+        endif()
+
+        find_sources(LIB_SRCS ${LIB_PATH} ${${LIB_SHORT_NAME}_RECURSE})
+        if(LIB_SRCS)
+
+            message(STATUS "Generating Arduino ${LIB_NAME} library")
+            include_directories(${LIB_PATH} ${LIB_PATH}/utility)
+            add_library(${TARGET_LIB_NAME} STATIC ${LIB_SRCS})
+
+            find_arduino_libraries(LIB_DEPS "${LIB_SRCS}")
+            foreach(LIB_DEP ${LIB_DEPS})
+                setup_arduino_library(DEP_LIB_SRCS ${BOARD_ID} ${LIB_DEP})
+                list(APPEND LIB_TARGETS ${DEP_LIB_SRCS})
+            endforeach()
+
+            target_link_libraries(${TARGET_LIB_NAME} ${BOARD_ID}_CORE ${LIB_TARGETS})
+            list(APPEND LIB_TARGETS ${TARGET_LIB_NAME})
+        endif()
+    else()
+        # Target already exists, skiping creating
+        include_directories(${LIB_PATH} ${LIB_PATH}/utility)
+        list(APPEND LIB_TARGETS ${TARGET_LIB_NAME})
+    endif()
+    if(LIB_TARGETS)
+        list(REMOVE_DUPLICATES LIB_TARGETS)
+    endif()
+    set(${VAR_NAME} ${LIB_TARGETS} PARENT_SCOPE)
+endfunction()
+
+# setup_arduino_libraries(VAR_NAME BOARD_ID SRCS)
+#
+#        VAR_NAME    - Vairable wich will hold the generated library names
+#        BOARD_ID    - Board ID
+#        SRCS        - source files
+#
+# Finds and creates all dependency libraries based on sources.
+#
+function(setup_arduino_libraries VAR_NAME BOARD_ID SRCS)
+    set(LIB_TARGETS)
+    find_arduino_libraries(TARGET_LIBS "${SRCS}")
+    foreach(TARGET_LIB ${TARGET_LIBS})
+        setup_arduino_library(LIB_DEPS ${BOARD_ID} ${TARGET_LIB}) # Create static library instead of returning sources
+        list(APPEND LIB_TARGETS ${LIB_DEPS})
+    endforeach()
+    set(${VAR_NAME} ${LIB_TARGETS} PARENT_SCOPE)
+endfunction()
+
+
+# setup_arduino_target(TARGET_NAME ALL_SRCS ALL_LIBS)
+#
+#        TARGET_NAME - Target name
+#        ALL_SRCS    - All sources
+#        ALL_LIBS    - All libraries
+#
+# Creates an Arduino firmware target.
+#
+function(setup_arduino_target TARGET_NAME ALL_SRCS ALL_LIBS)
+    add_executable(${TARGET_NAME} ${ALL_SRCS})
+    target_link_libraries(${TARGET_NAME} ${ALL_LIBS})
+    set_target_properties(${TARGET_NAME} PROPERTIES SUFFIX ".elf")
+
+    set(TARGET_PATH ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME})
+    add_custom_command(TARGET ${TARGET_NAME} POST_BUILD
+                        COMMAND ${CMAKE_OBJCOPY}
+                        ARGS     ${ARDUINO_OBJCOPY_EEP_FLAGS}
+                                 ${TARGET_PATH}.elf
+                                 ${TARGET_PATH}.eep
+                        VERBATIM)
+    add_custom_command(TARGET ${TARGET_NAME} POST_BUILD
+                        COMMAND ${CMAKE_OBJCOPY}
+                        ARGS    ${ARDUINO_OBJCOPY_HEX_FLAGS}
+                                ${TARGET_PATH}.elf
+                                ${TARGET_PATH}.hex
+                        VERBATIM)
+endfunction()
+
+# setup_arduino_upload(BOARD_ID TARGET_NAME PORT)
+#
+#        BOARD_ID    - Arduino board id
+#        TARGET_NAME - Target name
+#        PORT        - Serial port for upload
+#
+# Create an upload target (${TARGET_NAME}-upload) for the specified Arduino target.
+#
+function(setup_arduino_upload BOARD_ID TARGET_NAME PORT)
+# setup_arduino_bootloader_upload()
+    setup_arduino_bootloader_upload(${TARGET_NAME} ${BOARD_ID} ${PORT})
+
+    # Add programmer support if defined
+    if(${TARGET_NAME}_PROGRAMMER AND ${${TARGET_NAME}_PROGRAMMER}.protocol)
+        setup_arduino_programmer_burn(${TARGET_NAME} ${BOARD_ID} ${${TARGET_NAME}_PROGRAMMER} ${PORT})
+        setup_arduino_bootloader_burn(${TARGET_NAME} ${BOARD_ID} ${${TARGET_NAME}_PROGRAMMER} ${PORT})
+    endif()
+endfunction()
+
+
+# setup_arduino_bootloader_upload(TARGET_NAME BOARD_ID PORT)
+#
+#      TARGET_NAME - target name
+#      BOARD_ID    - board id
+#      PORT        - serial port
+#
+# Set up target for upload firmware via the bootloader.
+#
+# The target for uploading the firmware is ${TARGET_NAME}-upload .
+#
+function(setup_arduino_bootloader_upload TARGET_NAME BOARD_ID PORT)
+    set(UPLOAD_TARGET ${TARGET_NAME}-upload)
+    set(AVRDUDE_ARGS)
+
+    setup_arduino_bootloader_args(${BOARD_ID} ${TARGET_NAME} ${PORT} AVRDUDE_ARGS)
+
+    if(NOT AVRDUDE_ARGS)
+        message("Could not generate default avrdude bootloader args, aborting!")
+        return()
+    endif()
+
+    list(APPEND AVRDUDE_ARGS "-Uflash:w:${TARGET_NAME}.hex")
+    add_custom_target(${UPLOAD_TARGET}
+                     ${ARDUINO_AVRDUDE_PROGRAM} 
+                        ${AVRDUDE_ARGS}
+                     DEPENDS ${TARGET_NAME})
+endfunction()
+
+# setup_arduino_programmer_burn(TARGET_NAME BOARD_ID PROGRAMMER)
+#
+#      TARGET_NAME - name of target to burn
+#      BOARD_ID    - board id
+#      PROGRAMMER  - programmer id
+# 
+# Sets up target for burning firmware via a programmer.
+#
+# The target for burning the firmware is ${TARGET_NAME}-burn .
+#
+function(setup_arduino_programmer_burn TARGET_NAME BOARD_ID PROGRAMMER)
+    set(PROGRAMMER_TARGET ${TARGET_NAME}-burn)
+
+    set(AVRDUDE_ARGS)
+
+    setup_arduino_programmer_args(${BOARD_ID} ${PROGRAMMER} ${TARGET_NAME} ${PORT} AVRDUDE_ARGS)
+
+    if(NOT AVRDUDE_ARGS)
+        message("Could not generate default avrdude programmer args, aborting!")
+        return()
+    endif()
+
+    list(APPEND AVRDUDE_ARGS "-Uflash:w:${TARGET_NAME}.hex")
+
+    add_custom_target(${PROGRAMMER_TARGET}
+                     ${ARDUINO_AVRDUDE_PROGRAM} 
+                        ${AVRDUDE_ARGS}
+                     DEPENDS ${TARGET_NAME})
+endfunction()
+
+# setup_arduino_bootloader_burn(TARGET_NAME BOARD_ID PROGRAMMER)
+# 
+#      TARGET_NAME - name of target to burn
+#      BOARD_ID    - board id
+#      PROGRAMMER  - programmer id
+#
+# Create a target for burning a bootloader via a programmer.
+#
+# The target for burning the bootloader is ${TARGET_NAME}-burn-bootloader
+#
+function(setup_arduino_bootloader_burn TARGET_NAME BOARD_ID PROGRAMMER PORT)
+    set(BOOTLOADER_TARGET ${TARGET_NAME}-burn-bootloader)
+
+    set(AVRDUDE_ARGS)
+
+    setup_arduino_programmer_args(${BOARD_ID} ${PROGRAMMER} ${TARGET_NAME} ${PORT} AVRDUDE_ARGS)
+
+    if(NOT AVRDUDE_ARGS)
+        message("Could not generate default avrdude programmer args, aborting!")
+        return()
+    endif()
+
+    if(NOT ${BOARD_ID}.bootloader.unlock_bits)
+        message("Missing ${BOARD_ID}.bootloader.unlock_bits, not creating bootloader burn target ${BOOTLOADER_TARGET}.")
+        return()
+    endif()
+    if(NOT ${BOARD_ID}.bootloader.high_fuses)
+        message("Missing ${BOARD_ID}.bootloader.high_fuses, not creating bootloader burn target ${BOOTLOADER_TARGET}.")
+        return()
+    endif()
+    if(NOT ${BOARD_ID}.bootloader.low_fuses)
+        message("Missing ${BOARD_ID}.bootloader.low_fuses, not creating bootloader burn target ${BOOTLOADER_TARGET}.")
+        return()
+    endif()
+    if(NOT ${BOARD_ID}.bootloader.path)
+        message("Missing ${BOARD_ID}.bootloader.path, not creating bootloader burn target ${BOOTLOADER_TARGET}.")
+        return()
+    endif()
+    if(NOT ${BOARD_ID}.bootloader.file)
+        message("Missing ${BOARD_ID}.bootloader.file, not creating bootloader burn target ${BOOTLOADER_TARGET}.")
+        return()
+    endif()
+
+    if(NOT EXISTS "${ARDUINO_BOOTLOADERS_PATH}/${${BOARD_ID}.bootloader.path}/${${BOARD_ID}.bootloader.file}")
+        message("${ARDUINO_BOOTLOADERS_PATH}/${${BOARD_ID}.bootloader.path}/${${BOARD_ID}.bootloader.file}")
+        message("Missing bootloader image, not creating bootloader burn target ${BOOTLOADER_TARGET}.")
+        return()
+    endif()
+
+    # Erase the chip
+    list(APPEND AVRDUDE_ARGS "-e")
+
+    # Set unlock bits and fuses (because chip is going to be erased)
+    list(APPEND AVRDUDE_ARGS "-Ulock:w:${${BOARD_ID}.bootloader.unlock_bits}:m")
+    if(${BOARD_ID}.bootloader.extended_fuses)
+        list(APPEND AVRDUDE_ARGS "-Uefuse:w:${${BOARD_ID}.bootloader.extended_fuses}:m")
+    endif()
+    list(APPEND AVRDUDE_ARGS "-Uhfuse:w:${${BOARD_ID}.bootloader.high_fuses}:m")
+    list(APPEND AVRDUDE_ARGS "-Ulfuse:w:${${BOARD_ID}.bootloader.low_fuses}:m")
+
+    # Set bootloader image
+    list(APPEND AVRDUDE_ARGS "-Uflash:w:${${BOARD_ID}.bootloader.file}:i")
+
+    # Set lockbits
+    list(APPEND AVRDUDE_ARGS "-Ulock:w:${${BOARD_ID}.bootloader.lock_bits}:m")
+
+    # Create burn bootloader target
+    add_custom_target(${BOOTLOADER_TARGET}
+                     ${ARDUINO_AVRDUDE_PROGRAM} 
+                        ${AVRDUDE_ARGS}
+                     WORKING_DIRECTORY ${ARDUINO_BOOTLOADERS_PATH}/${${BOARD_ID}.bootloader.path}
+                     DEPENDS ${TARGET_NAME})
+endfunction()
+
+# setup_arduino_programmer_args(PROGRAMMER OUTPUT_VAR)
+#
+#      PROGRAMMER  - programmer id
+#      TARGET_NAME - target name
+#      OUTPUT_VAR  - name of output variable for result
+#
+# Sets up default avrdude settings for burning firmware via a programmer.
+function(setup_arduino_programmer_args BOARD_ID PROGRAMMER TARGET_NAME PORT OUTPUT_VAR)
+    set(AVRDUDE_ARGS ${${OUTPUT_VAR}})
+
+    set(AVRDUDE_FLAGS ${ARDUINO_AVRDUDE_FLAGS})
+    if(DEFINED ${TARGET_NAME}_AFLAGS)
+        set(AVRDUDE_FLAGS ${${TARGET_NAME}_AFLAGS})
+    endif()
+
+    list(APPEND AVRDUDE_ARGS "-C${ARDUINO_AVRDUDE_CONFIG_PATH}")
+
+    #TODO: Check mandatory settings before continuing
+    if(NOT ${PROGRAMMER}.protocol)
+        message(FATAL_ERROR "Missing ${PROGRAMMER}.protocol, aborting!")
+    endif()
+
+    list(APPEND AVRDUDE_ARGS "-c${${PROGRAMMER}.protocol}") # Set programmer
+
+    if(${PROGRAMMER}.communication STREQUAL "usb")
+        list(APPEND AVRDUDE_ARGS "-Pusb") # Set USB as port
+    elseif(${PROGRAMMER}.communication STREQUAL "serial")
+        list(APPEND AVRDUDE_ARGS "-P${PORT}") # Set port
+        if(${PROGRAMMER}.speed)
+            list(APPEND AVRDUDE_ARGS "-b${${PROGRAMMER}.speed}") # Set baud rate
+        endif()
+    endif()
+
+    if(${PROGRAMMER}.force)
+        list(APPEND AVRDUDE_ARGS "-F") # Set force
+    endif()
+
+    if(${PROGRAMMER}.delay)
+        list(APPEND AVRDUDE_ARGS "-i${${PROGRAMMER}.delay}") # Set delay
+    endif()
+
+    list(APPEND AVRDUDE_ARGS "-p${${BOARD_ID}.build.mcu}")  # MCU Type
+
+    list(APPEND AVRDUDE_ARGS ${AVRDUDE_FLAGS})
+
+    set(${OUTPUT_VAR} ${AVRDUDE_ARGS} PARENT_SCOPE)
+endfunction()
+
+# setup_arduino_bootloader_args(BOARD_ID TARGET_NAME PORT OUTPUT_VAR)
+#
+#      BOARD_ID    - board id
+#      TARGET_NAME - target name
+#      PORT        - serial port
+#      OUTPUT_VAR  - name of output variable for result
+#
+# Sets up default avrdude settings for uploading firmware via the bootloader.
+function(setup_arduino_bootloader_args BOARD_ID TARGET_NAME PORT OUTPUT_VAR)
+    set(AVRDUDE_ARGS ${${OUTPUT_VAR}})
+
+    set(AVRDUDE_FLAGS ${ARDUINO_AVRDUDE_FLAGS})
+    if(DEFINED ${TARGET_NAME}_AFLAGS)
+        set(AVRDUDE_FLAGS ${${TARGET_NAME}_AFLAGS})
+    endif()
+
+    list(APPEND AVRDUDE_ARGS "-C${ARDUINO_AVRDUDE_CONFIG_PATH}") # avrdude config
+
+    list(APPEND AVRDUDE_ARGS "-p${${BOARD_ID}.build.mcu}")  # MCU Type
+
+    # Programmer
+    if(${BOARD_ID}.upload.protocol STREQUAL "stk500")
+        list(APPEND AVRDUDE_ARGS "-cstk500v1")
+    else()
+        list(APPEND AVRDUDE_ARGS "-c${${BOARD_ID}.upload.protocol}")
+    endif()
+
+    list(APPEND AVRDUDE_ARGS "-b${${BOARD_ID}.upload.speed}") # Baud rate
+
+    list(APPEND AVRDUDE_ARGS "-P${PORT}")  # Serial port
+
+    list(APPEND AVRDUDE_ARGS "-D")  # Dont erase
+
+    list(APPEND AVRDUDE_ARGS ${AVRDUDE_FLAGS})
+
+    set(${OUTPUT_VAR} ${AVRDUDE_ARGS} PARENT_SCOPE)
+endfunction()
+
+# find_sources(VAR_NAME LIB_PATH RECURSE)
+#
+#        VAR_NAME - Variable name that will hold the detected sources
+#        LIB_PATH - The base path
+#        RECURSE  - Whether or not to recurse
+#
+# Finds all C/C++ sources located at the specified path.
+#
+function(find_sources VAR_NAME LIB_PATH RECURSE)
+    set(FILE_SEARCH_LIST
+        ${LIB_PATH}/*.cpp
+        ${LIB_PATH}/*.c
+        ${LIB_PATH}/*.cc
+        ${LIB_PATH}/*.cxx
+        ${LIB_PATH}/*.h
+        ${LIB_PATH}/*.hh
+        ${LIB_PATH}/*.hxx)
+
+    if(RECURSE)
+        file(GLOB_RECURSE LIB_FILES ${FILE_SEARCH_LIST})
+    else()
+        file(GLOB LIB_FILES ${FILE_SEARCH_LIST})
+    endif()
+
+    if(LIB_FILES)
+        set(${VAR_NAME} ${LIB_FILES} PARENT_SCOPE)
+    endif()
+endfunction()
+
+# setup_serial_target(TARGET_NAME CMD)
+#
+#         TARGET_NAME - Target name
+#         CMD         - Serial terminal command
+#
+# Creates a target (${TARGET_NAME}-serial) for launching the serial termnial.
+#
+function(setup_serial_target TARGET_NAME CMD)
+    string(CONFIGURE "${CMD}" FULL_CMD @ONLY)
+    add_custom_target(${TARGET_NAME}-serial
+                      ${FULL_CMD})
+endfunction()
+
+
+# detect_arduino_version(VAR_NAME)
+#
+#       VAR_NAME - Variable name where the detected version will be saved
+#
+# Detects the Arduino SDK Version based on the revisions.txt file.
+#
+function(detect_arduino_version VAR_NAME)
+    if(ARDUINO_VERSION_PATH)
+        file(READ ${ARDUINO_VERSION_PATH} ARD_VERSION)
+        if("${ARD_VERSION}" MATCHES " *[0]+([0-9]+)")
+            set(${VAR_NAME} ${CMAKE_MATCH_1} PARENT_SCOPE)
+        elseif("${ARD_VERSION}" MATCHES "[ ]*([0-9]+[.][0-9]+)")
+            set(${VAR_NAME} ${CMAKE_MATCH_1} PARENT_SCOPE)
+        endif()
+    endif()
+endfunction()
+
+
+function(convert_arduino_sketch VAR_NAME SRCS)
+endfunction()
+
+# load_arduino_style_settings(SETTINGS_LIST SETTINGS_PATH)
+#
+#      SETTINGS_LIST - Variable name of settings list
+#      SETTINGS_PATH - File path of settings file to load.
+#
+# Load a Arduino style settings file into the cache.
+# 
+#  Examples of this type of settings file is the boards.txt and
+# programmers.txt files located in ${ARDUINO_SDK}/hardware/arduino.
+#
+# Settings have to following format:
+#
+#      entry.setting[.subsetting] = value
+#
+# where [.subsetting] is optional
+#
+# For example, the following settings:
+#
+#      uno.name=Arduino Uno
+#      uno.upload.protocol=stk500
+#      uno.upload.maximum_size=32256
+#      uno.build.mcu=atmega328p
+#      uno.build.core=arduino
+#
+# will generate the follwoing equivalent CMake variables:
+#
+#      set(uno.name "Arduino Uno")
+#      set(uno.upload.protocol     "stk500")
+#      set(uno.upload.maximum_size "32256")
+#      set(uno.build.mcu  "atmega328p")
+#      set(uno.build.core "arduino")
+#
+#      set(uno.SETTINGS  name upload build)              # List of settings for uno
+#      set(uno.upload.SUBSETTINGS protocol maximum_size) # List of sub-settings for uno.upload
+#      set(uno.build.SUBSETTINGS mcu core)               # List of sub-settings for uno.build
+# 
+#  The ${ENTRY_NAME}.SETTINGS variable lists all settings for the entry, while
+# ${ENTRY_NAME}.SUBSETTINGS variables lists all settings for a sub-setting of
+# a entry setting pair.
+#
+#  These variables are generated in order to be able to  programatically traverse
+# all settings (for a example see print_board_settings() function).
+#
+function(LOAD_ARDUINO_STYLE_SETTINGS SETTINGS_LIST SETTINGS_PATH)
+
+    if(NOT ${SETTINGS_LIST} AND EXISTS ${SETTINGS_PATH})
+    file(STRINGS ${SETTINGS_PATH} FILE_ENTRIES)  # Settings file split into lines
+
+    foreach(FILE_ENTRY ${FILE_ENTRIES})
+        if("${FILE_ENTRY}" MATCHES "^[^#]+=.*")
+            string(REGEX MATCH "^[^=]+" SETTING_NAME  ${FILE_ENTRY})
+            string(REGEX MATCH "[^=]+$" SETTING_VALUE ${FILE_ENTRY})
+            string(REPLACE "." ";" ENTRY_NAME_TOKENS ${SETTING_NAME})
+            string(STRIP "${SETTING_VALUE}" SETTING_VALUE)
+
+            list(LENGTH ENTRY_NAME_TOKENS ENTRY_NAME_TOKENS_LEN)
+
+
+            # Add entry to settings list if it does not exist
+            list(GET ENTRY_NAME_TOKENS 0 ENTRY_NAME)
+            list(FIND ${SETTINGS_LIST} ${ENTRY_NAME} ENTRY_NAME_INDEX)
+            if(ENTRY_NAME_INDEX LESS 0)
+                # Add entry to main list
+                list(APPEND ${SETTINGS_LIST} ${ENTRY_NAME})
+            endif()
+
+            # Add entry setting to entry settings list if it does not exist
+            set(ENTRY_SETTING_LIST ${ENTRY_NAME}.SETTINGS)
+            list(GET ENTRY_NAME_TOKENS 1 ENTRY_SETTING)
+            list(FIND ${ENTRY_SETTING_LIST} ${ENTRY_SETTING} ENTRY_SETTING_INDEX)
+            if(ENTRY_SETTING_INDEX LESS 0)
+                # Add setting to entry
+                list(APPEND ${ENTRY_SETTING_LIST} ${ENTRY_SETTING})
+                set(${ENTRY_SETTING_LIST} ${${ENTRY_SETTING_LIST}}
+                    CACHE INTERNAL "Arduino ${ENTRY_NAME} Board settings list")
+            endif()
+
+            set(FULL_SETTING_NAME ${ENTRY_NAME}.${ENTRY_SETTING})
+
+            # Add entry sub-setting to entry sub-settings list if it does not exists
+            if(ENTRY_NAME_TOKENS_LEN GREATER 2)
+                set(ENTRY_SUBSETTING_LIST ${ENTRY_NAME}.${ENTRY_SETTING}.SUBSETTINGS)
+                list(GET ENTRY_NAME_TOKENS 2 ENTRY_SUBSETTING)
+                list(FIND ${ENTRY_SUBSETTING_LIST} ${ENTRY_SUBSETTING} ENTRY_SUBSETTING_INDEX)
+                if(ENTRY_SUBSETTING_INDEX LESS 0)
+                    list(APPEND ${ENTRY_SUBSETTING_LIST} ${ENTRY_SUBSETTING})
+                    set(${ENTRY_SUBSETTING_LIST}  ${${ENTRY_SUBSETTING_LIST}}
+                        CACHE INTERNAL "Arduino ${ENTRY_NAME} Board sub-settings list")
+                endif()
+                set(FULL_SETTING_NAME ${FULL_SETTING_NAME}.${ENTRY_SUBSETTING})
+            endif()
+
+            # Save setting value
+            set(${FULL_SETTING_NAME} ${SETTING_VALUE}
+                CACHE INTERNAL "Arduino ${ENTRY_NAME} Board setting")
+            
+
+        endif()
+    endforeach()
+    set(${SETTINGS_LIST} ${${SETTINGS_LIST}}
+        CACHE STRING "List of detected Arduino Board configurations")
+    mark_as_advanced(${SETTINGS_LIST})
+    endif()
+endfunction()
+
+# print_settings(ENTRY_NAME)
+#
+#      ENTRY_NAME - name of entry
+#
+# Print the entry settings (see load_arduino_syle_settings()).
+#
+function(PRINT_SETTINGS ENTRY_NAME)
+    if(${ENTRY_NAME}.SETTINGS)
+
+        foreach(ENTRY_SETTING ${${ENTRY_NAME}.SETTINGS})
+            if(${ENTRY_NAME}.${ENTRY_SETTING})
+                message(STATUS "   ${ENTRY_NAME}.${ENTRY_SETTING}=${${ENTRY_NAME}.${ENTRY_SETTING}}")
+            endif()
+            if(${ENTRY_NAME}.${ENTRY_SETTING}.SUBSETTINGS)
+                foreach(ENTRY_SUBSETTING ${${ENTRY_NAME}.${ENTRY_SETTING}.SUBSETTINGS})
+                    if(${ENTRY_NAME}.${ENTRY_SETTING}.${ENTRY_SUBSETTING})
+                        message(STATUS "   ${ENTRY_NAME}.${ENTRY_SETTING}.${ENTRY_SUBSETTING}=${${ENTRY_NAME}.${ENTRY_SETTING}.${ENTRY_SUBSETTING}}")
+                    endif()
+                endforeach()
+            endif()
+            message(STATUS "")
+        endforeach()
+    endif()
+endfunction()
+
+# print_list(SETTINGS_LIST)
+#
+#      SETTINGS_LIST - Variables name of settings list
+#
+# Print list settings and names (see load_arduino_syle_settings()).
+function(PRINT_LIST SETTINGS_LIST)
+    if(${SETTINGS_LIST})
+        set(MAX_LENGTH 0)
+        foreach(ENTRY_NAME ${${SETTINGS_LIST}})
+            string(LENGTH "${ENTRY_NAME}" CURRENT_LENGTH)
+            if(CURRENT_LENGTH GREATER MAX_LENGTH)
+                set(MAX_LENGTH ${CURRENT_LENGTH})
+            endif()
+        endforeach()
+        foreach(ENTRY_NAME ${${SETTINGS_LIST}})
+            string(LENGTH "${ENTRY_NAME}" CURRENT_LENGTH)
+            math(EXPR PADDING_LENGTH "${MAX_LENGTH}-${CURRENT_LENGTH}")
+            set(PADDING "")
+            foreach(X RANGE ${PADDING_LENGTH})
+                set(PADDING "${PADDING} ")
+            endforeach()
+            message(STATUS "   ${PADDING}${ENTRY_NAME}: ${${ENTRY_NAME}.name}")
+        endforeach()
+    endif()
+endfunction()
+
+
+# Setting up Arduino enviroment settings
+if(NOT ARDUINO_FOUND)
+    find_file(ARDUINO_CORES_PATH
+              NAMES cores
+              PATHS ${ARDUINO_SDK_PATH}
+              PATH_SUFFIXES hardware/arduino)
+
+    find_file(ARDUINO_VARIANTS_PATH
+              NAMES variants 
+              PATHS ${ARDUINO_SDK_PATH}
+              PATH_SUFFIXES hardware/arduino)
+
+    find_file(ARDUINO_BOOTLOADERS_PATH
+              NAMES bootloaders
+              PATHS ${ARDUINO_SDK_PATH}
+              PATH_SUFFIXES hardware/arduino)
+
+    find_file(ARDUINO_LIBRARIES_PATH
+              NAMES libraries
+              PATHS ${ARDUINO_SDK_PATH})
+
+    find_file(ARDUINO_BOARDS_PATH
+              NAMES boards.txt
+              PATHS ${ARDUINO_SDK_PATH}
+              PATH_SUFFIXES hardware/arduino)
+
+    find_file(ARDUINO_PROGRAMMERS_PATH
+              NAMES programmers.txt
+              PATHS ${ARDUINO_SDK_PATH}
+              PATH_SUFFIXES hardware/arduino)
+
+    find_file(ARDUINO_REVISIONS_PATH
+              NAMES revisions.txt
+              PATHS ${ARDUINO_SDK_PATH})
+
+    find_file(ARDUINO_VERSION_PATH
+              NAMES lib/version.txt
+              PATHS ${ARDUINO_SDK_PATH})
+
+    find_program(ARDUINO_AVRDUDE_PROGRAM
+                 NAMES avrdude
+                 PATHS ${ARDUINO_SDK_PATH}
+                 PATH_SUFFIXES hardware/tools)
+
+    find_program(ARDUINO_AVRDUDE_CONFIG_PATH
+                 NAMES avrdude.conf
+                 PATHS ${ARDUINO_SDK_PATH} /etc/avrdude
+                 PATH_SUFFIXES hardware/tools
+                               hardware/tools/avr/etc)
+
+     set(ARDUINO_OBJCOPY_EEP_FLAGS -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
+         CACHE STRING "")
+     set(ARDUINO_OBJCOPY_HEX_FLAGS -O ihex -R .eeprom
+         CACHE STRING "")
+     set(ARDUINO_AVRDUDE_FLAGS -V
+         CACHE STRING "Arvdude global flag list.")
+
+     if(ARDUINO_SDK_PATH)
+         detect_arduino_version(ARDUINO_SDK_VERSION)
+         set(ARDUINO_SDK_VERSION ${ARDUINO_SDK_VERSION} CACHE STRING "Arduino SDK Version")
+     endif(ARDUINO_SDK_PATH)
+
+    include(FindPackageHandleStandardArgs)
+    find_package_handle_standard_args(Arduino
+                                      REQUIRED_VARS ARDUINO_SDK_PATH
+                                                    ARDUINO_SDK_VERSION
+                                      VERSION_VAR ARDUINO_SDK_VERSION)
+
+
+     mark_as_advanced(ARDUINO_CORES_PATH
+		      ARDUINO_VARIANTS_PATH
+                      ARDUINO_BOOTLOADERS_PATH
+                      ARDUINO_SDK_VERSION
+                      ARDUINO_LIBRARIES_PATH
+                      ARDUINO_BOARDS_PATH
+                      ARDUINO_PROGRAMMERS_PATH
+                      ARDUINO_REVISIONS_PATH
+                      ARDUINO_VERSION_PATH
+                      ARDUINO_AVRDUDE_FLAGS
+                      ARDUINO_AVRDUDE_PROGRAM
+                      ARDUINO_AVRDUDE_CONFIG_PATH
+                      ARDUINO_OBJCOPY_EEP_FLAGS
+                      ARDUINO_OBJCOPY_HEX_FLAGS)
+
+    load_board_settings()
+    load_programmers_settings()
+
+    print_board_list()
+    print_programmer_list()
+
+    set(ARDUINO_FOUND True CACHE INTERNAL "Arduino Found")
+endif()
+
diff --git a/Matrix_9x14/cmake/modules/Platform/Arduino.cmake b/Matrix_9x14/cmake/modules/Platform/Arduino.cmake
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/Matrix_9x14/cmake/modules/Platform/Arduino.cmake
diff --git a/Matrix_9x14/cmake/modules/Platform/ArduinoPaths.cmake b/Matrix_9x14/cmake/modules/Platform/ArduinoPaths.cmake
new file mode 100644
index 0000000..2737209
--- /dev/null
+++ b/Matrix_9x14/cmake/modules/Platform/ArduinoPaths.cmake
@@ -0,0 +1,21 @@
+if(UNIX)
+    include(Platform/UnixPaths)
+    if(APPLE)
+        list(APPEND CMAKE_SYSTEM_PREFIX_PATH ~/Applications
+                                             /Applications
+                                             /Developer/Applications
+                                             /sw        # Fink
+                                             /opt/local) # MacPorts
+    endif()
+elseif(WIN32)
+    include(Platform/WindowsPaths)
+endif()
+
+if(ARDUINO_SDK_PATH)
+    if(WIN32)
+        list(APPEND CMAKE_SYSTEM_PREFIX_PATH ${ARDUINO_SDK_PATH}/hardware/tools/avr/bin)
+        list(APPEND CMAKE_SYSTEM_PREFIX_PATH ${ARDUINO_SDK_PATH}/hardware/tools/avr/utils/bin)
+    elseif(APPLE)
+        list(APPEND CMAKE_SYSTEM_PREFIX_PATH ${ARDUINO_SDK_PATH}/hardware/tools/avr/bin)
+    endif()
+endif()
diff --git a/Matrix_9x14/cmake/toolchains/Arduino.cmake b/Matrix_9x14/cmake/toolchains/Arduino.cmake
new file mode 100644
index 0000000..75a6758
--- /dev/null
+++ b/Matrix_9x14/cmake/toolchains/Arduino.cmake
@@ -0,0 +1,74 @@
+set(CMAKE_SYSTEM_NAME Arduino)
+
+set(CMAKE_C_COMPILER   avr-gcc)
+set(CMAKE_CXX_COMPILER avr-g++)
+
+#=============================================================================#
+#                              C Flags                                        #
+#=============================================================================#
+if (NOT DEFINED ARDUINO_C_FLAGS)
+    set(ARDUINO_C_FLAGS "-ffunction-sections -fdata-sections")
+endif()
+set(CMAKE_C_FLAGS                "-g -Os       ${ARDUINO_C_FLAGS}" CACHE STRING "")
+set(CMAKE_C_FLAGS_DEBUG          "-g           ${ARDUINO_C_FLAGS}" CACHE STRING "")
+set(CMAKE_C_FLAGS_MINSIZEREL     "-Os -DNDEBUG ${ARDUINO_C_FLAGS}" CACHE STRING "")
+set(CMAKE_C_FLAGS_RELEASE        "-0s -DNDEBUG -w ${ARDUINO_C_FLAGS}" CACHE STRING "")
+set(CMAKE_C_FLAGS_RELWITHDEBINFO "-0s -g       -w ${ARDUINO_C_FLAGS}" CACHE STRING "")
+
+#=============================================================================#
+#                             C++ Flags                                       #
+#=============================================================================#
+if (NOT DEFINED ARDUINO_CXX_FLAGS)
+    set(ARDUINO_CXX_FLAGS "${ARDUINO_C_FLAGS} -fno-exceptions")
+endif()
+set(CMAKE_CXX_FLAGS                "-g -Os       ${ARDUINO_CXX_FLAGS}" CACHE STRING "")
+set(CMAKE_CXX_FLAGS_DEBUG          "-g           ${ARDUINO_CXX_FLAGS}" CACHE STRING "")
+set(CMAKE_CXX_FLAGS_MINSIZEREL     "-Os -DNDEBUG ${ARDUINO_CXX_FLAGS}" CACHE STRING "")
+set(CMAKE_CXX_FLAGS_RELEASE        "-0s -DNDEBUG ${ARDUINO_CXX_FLAGS}" CACHE STRING "")
+set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "-0s -g       ${ARDUINO_CXX_FLAGS}" CACHE STRING "")
+
+#=============================================================================#
+#                       Executable Linker Flags                               #
+#=============================================================================#
+if (NOT DEFINED ARDUINO_LINKER_FLAGS)
+    set(ARDUINO_LINKER_FLAGS "-Wl,--gc-sections")
+endif()
+set(CMAKE_EXE_LINKER_FLAGS                "${ARDUINO_LINKER_FLAGS}" CACHE STRING "")
+set(CMAKE_EXE_LINKER_FLAGS_DEBUG          "${ARDUINO_LINKER_FLAGS}" CACHE STRING "")
+set(CMAKE_EXE_LINKER_FLAGS_MINSIZEREL     "${ARDUINO_LINKER_FLAGS}" CACHE STRING "")
+set(CMAKE_EXE_LINKER_FLAGS_RELEASE        "${ARDUINO_LINKER_FLAGS}" CACHE STRING "")
+set(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO "${ARDUINO_LINKER_FLAGS}" CACHE STRING "")
+
+#=============================================================================#
+#                       Shared Lbrary Linker Flags                            #
+#=============================================================================#
+set(CMAKE_SHARED_LINKER_FLAGS                ""                        CACHE STRING "")
+set(CMAKE_SHARED_LINKER_FLAGS_DEBUG          ""                        CACHE STRING "")
+set(CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL     ""                        CACHE STRING "")
+set(CMAKE_SHARED_LINKER_FLAGS_RELEASE        ""                        CACHE STRING "")
+set(CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO ""                        CACHE STRING "")
+
+set(CMAKE_MODULE_LINKER_FLAGS                ""                        CACHE STRING "")
+set(CMAKE_MODULE_LINKER_FLAGS_DEBUG          ""                        CACHE STRING "")
+set(CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL     ""                        CACHE STRING "")
+set(CMAKE_MODULE_LINKER_FLAGS_RELEASE        ""                        CACHE STRING "")
+set(CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO ""                        CACHE STRING "")
+
+
+
+
+set(ARDUINO_PATHS)
+foreach(VERSION 22 1)
+	list(APPEND ARDUINO_PATHS arduino-00${VERSION})
+endforeach()
+
+#list(APPEND ARDUINO_PATHS arduino)
+
+find_path(ARDUINO_SDK_PATH
+          NAMES lib/version.txt
+          PATH_SUFFIXES share/arduino
+                        Arduino.app/Contents/Resources/Java/
+                        ${ARDUINO_PATHS}
+          DOC "Arduino Development Kit path.")
+
+include(Platform/ArduinoPaths)