cmake hinzu

2 files changed, 56 insertions, 0 deletions

diff --git a/arduino-cmake/example/CMakeLists.txt b/arduino-cmake/example/CMakeLists.txt
new file mode 100644
index 0000000..3c89c12
--- /dev/null
+++ b/arduino-cmake/example/CMakeLists.txt
@@ -0,0 +1,24 @@
+#=============================================================================#
+# Author: QueezyTheGreat                                                      #
+# Date:   26.04.2011                                                          #
+#                                                                             #
+# Description: wire_master_reader firmware exmaple                            #
+#                                                                             #
+#=============================================================================#
+
+
+#====================================================================#
+#  Settings                                                          #
+#====================================================================#
+set(FIRMWARE_NAME wire_reader)
+
+set(${FIRMWARE_NAME}_BOARD uno)               # Arduino Target board
+set(${FIRMWARE_NAME}_SRCS wire_master_reader.cpp)  # Firmware sources
+
+set(${FIRMWARE_NAME}_PORT /dev/ttyACM0)            # Serial upload port
+
+
+#====================================================================#
+#  Target generation                                                 #
+#====================================================================#
+generate_arduino_firmware(${FIRMWARE_NAME})
diff --git a/arduino-cmake/example/wire_master_reader.cpp b/arduino-cmake/example/wire_master_reader.cpp
new file mode 100644
index 0000000..9c755db
--- /dev/null
+++ b/arduino-cmake/example/wire_master_reader.cpp
@@ -0,0 +1,32 @@
+// Wire Master Reader
+// by Nicholas Zambetti <http://www.zambetti.com>
+
+// Demonstrates use of the Wire library
+// Reads data from an I2C/TWI slave device
+// Refer to the "Wire Slave Sender" example for use with this
+
+// Created 29 March 2006
+
+// This example code is in the public domain.
+
+#include <Arduino.h>
+#include <Wire.h>
+
+void setup()
+{
+  Wire.begin();        // join i2c bus (address optional for master)
+  Serial.begin(9600);  // start serial for output
+}
+
+void loop()
+{
+  Wire.requestFrom(2, 6);    // request 6 bytes from slave device #2
+
+  while(Wire.available())    // slave may send less than requested
+  { 
+    char c = Wire.read(); // receive a byte as character
+    Serial.print(c);         // print the character
+  }
+
+  delay(500);
+}