Rename man page to fastd.1

1 files changed, 0 insertions, 118 deletions

diff --git a/doc/fastd.man b/doc/fastd.man
deleted file mode 100644
index 28e4f69..0000000
--- a/doc/fastd.man
+++ /dev/null
@@ -1,118 +0,0 @@
-.TH FASTD 1 "March 2014" "fastd v12" "User Commands"
-.SH NAME
-fastd \- Fast and Secure Tunnelling Daemon
-.SH SYNOPSIS
-.B fastd
-\fIOPTION\fR...
-.SH DESCRIPTION
-fastd is a very small VPN daemon which tunnels IP packets and Ethernet frames over UDP. It supports various modern
-encryption and authentication schemes and can be used in many different network topologies (1:1, 1:n, meshed).
-.SH OPTIONS
-.TP
-\fB\-\-help\fR, \fB\-h\fR
-Shows a help text.
-.TP
-\fB\-\-version\fR, \fB\-v\fR
-Shows the fastd version.
-.TP
-\fB\-\-daemon\fR, \fB\-d\fR
-Runs fastd in the background.
-.TP
-\fB\-\-pid\-file\fR <filename>
-Writes fastd's PID to the specified file.
-.TP
-\fB\-\-config\fR, \fB\-c\fR <filename>
-Loads a config file. - can be specified to read a config file from stdin. More than one config file can be loaded.
-.TP
-\fB\-\-config\-peer\fR <filename>
-Loads a config file for a single peer. The filename will be used as the peer name.
-.TP
-\fB\-\-config\-peer\-dir\fR <dir>
-Loads all files from a directory as peer configs. On \fBSIGHUP\fR fastd will reload peer directories.
-.TP
-\fB\-\-user\fR <user>
-Sets the user to run fastd as.
-.TP
-\fB\-\-group\fR <group>
-Sets the group to run fastd as.
-.TP
-\fB\-\-log\-level\fR error|warn|info|verbose|debug|debug2
-Sets the stderr log level; default is \fIinfo\fR if no alternative log destination is configured.
-.TP
-\fB\-\-syslog\-level\fR error|warn|info|verbose|debug|debug2
-Sets the log level for syslog output; default is not to use syslog.
-.TP
-\fB\-\-syslog\-ident\fR <ident>
-Sets the syslog identification; default is \fIfastd\fR.
-.TP
-\fB\-\-hide\-ip\-addresses\fR
-Hides IP addresses in log output.
-.TP
-\fB\-\-hide\-mac\-addresses\fR
-Hides MAC addresses in log output.
-.TP
-\fB\-\-mode\fR, \fB\-m\fR tap|tun
-Sets the mode of the interface; default is TAP mode.
-.TP
-\fB\-\-interface\fR, \fB\-i\fR <name>
-Sets the name of the TUN/TAP interface to use. If not specified, default names specified by the system will be used.
-.TP
-\fB\-\-mtu\fR, \fB\-M\fR <mtu>
-Sets the MTU; must be at least 576.
-.TP
-\fB\-\-bind\fR, \fB\-b\fR <address>[:<port>]
-Sets the bind address. Address can be an IPv4 address or an IPv6 address, or the keyword any. IPv6 addresses must be put in square brackets.
-
-By default fastd will to bind to a random port for both IPv4 and IPv6. It is currently
-not possible to specify an IPv6 link-local address on the command line.
-.TP
-\fB\-\-protocol\fR, \fB\-p\fR <protocol>
-Sets the handshake protocol. Currently the only protocol available is \fIec25519-fhmqvc\fR, which provides a secure authentication of peers based on public/secret keys.
-.TP
-\fB\-\-method\fR <method>
-Sets the encryption method.
-.TP
-\fB\-\-forward\fR
-Enables forwarding of packets between peers; read the full documentation before use!
-.TP
-\fB\-\-on\-pre\-up\fR <command>
-Sets a shell command to execute before interface creation.
-.TP
-\fB\-\-on\-up\fR <command>
-Sets a shell command to execute after interface creation.
-.TP
-\fB\-\-on\-down\fR <command>
-Sets a shell command to execute before interface destruction.
-.TP
-\fB\-\-on\-post\-down\fR <command>
-Sets a shell command to execute after interface destruction.
-.TP
-\fB\-\-on\-establish\fR <command>
-Sets a shell command to execute when a new connection is established.
-.TP
-\fB\-\-on\-disestablish\fR <command>
-Sets a shell command to execute when a connection is lost.
-.TP
-\fB\-\-on\-verify\fR <command>
-Sets a shell command to execute to check a connection attempt by an unknown peer.
-.TP
-\fB\-\-verify\-config\fR
-Checks the configuration and exits.
-.TP
-\fB\-\-generate\-key\fR
-Generates a new keypair.
-.TP
-\fB\-\-show\-key\fR
-Shows the public key corresponding to the configured secret.
-.TP
-\fB\-\-machine\-readable\fR
-Suppresses output of explaining text in the \fB\-\-show\-key\fR and \fB\-\-generate\-key\fR commands.
-.SH "SEE ALSO"
-The full documentation for
-.B fastd
-is maintained in the Wiki at
-\fIhttps://projects.universe-factory.net/projects/fastd/wiki/Fastd\fR.
-
-See the user manual at
-\fIhttps://projects.universe-factory.net/projects/fastd/wiki/User_manual\fR
-in particular.