summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--doc/bird.sgml166
1 files changed, 116 insertions, 50 deletions
diff --git a/doc/bird.sgml b/doc/bird.sgml
index 3f239f7..d0fe47d 100644
--- a/doc/bird.sgml
+++ b/doc/bird.sgml
@@ -206,6 +206,7 @@ protocol device {
protocol rip {
export all;
import all;
+ interface "*";
}
</code>
@@ -298,19 +299,88 @@ to zero to disable it. An empty <cf><m/switch/</cf> is equivalent to <cf/on/
<p>There are several options that give sense only with certain protocols:
<descrip>
- <tag>passwords { password "<m/password/" from <m/time/ to <m/time/ passive <m/time/ id
- <m/num/ [...] }</tag> Specifies passwords to be used with this protocol. <cf>Passive <m/time/</cf> is
- time from which the password is not used for sending, but it is recognized on reception. <cf/id/ is password ID as needed by
- certain protocols. Format of <cf><m/time/</cf> is <tt>dd-mm-yyyy HH:MM:SS</tt>.
-
- <tag>interface "<m/mask/"|<m/prefix/ [ { <m/option/ ; [...] } ]</tag> Specifies which
- interfaces is this protocol active on and allows you to set options on a
- per-interface basis. Mask is specified as in shell-like patterns, thus <cf>interface
- "*" { mode broadcast; };</cf> will start the protocol on all interfaces with <cf>mode
- broadcast;</cf> option. If the first character of mask is <cf/-/, such interfaces are
- excluded. Masks are parsed left-to-right, thus <cf/interface "-eth*", "*";/ means all but
- the ethernets. Default: none.
+ <tag><label id="dsc-iface">interface [-] [ "<m/mask/" ] [ <m/prefix/ ] [, ...] [ { <m/option/ ; [...] } ]</tag>
+
+ Specifies a set of interfaces on which the protocol is activated with
+ given interface-specific options. A set of interfaces specified by one
+ interface option is described using an interface pattern. The
+ interface pattern consists of a sequence of clauses (separted by
+ commas), each clause may contain a mask, a prefix, or both of them. An
+ interface matches the clause if its name matches the mask (if
+ specified) and its address matches the prefix (if specified). Mask is
+ specified as shell-like pattern.
+
+ An interface matches the pattern if it matches any of its
+ clauses. If the clause begins with <cf/-/, matching interfaces are
+ excluded. Patterns are parsed left-to-right, thus
+ <cf/interface "eth0", -"eth*", "*";/ means eth0 and all
+ non-ethernets.
+
+ An interface option can be used more times with different
+ interfaces-specific options, in that case for given interface
+ the first matching interface option is used.
+
+ This option is allowed in Direct, OSPF and RIP protocols,
+ but in OSPF protocol it is used in <cf/area/ subsection.
+
+ Default: none.
+
+ Examples:
+
+ <cf>interface "*" { type broadcast; };</cf> - start the protocol on all interfaces with
+ <cf>type broadcast</cf> option.
+
+ <cf>interface "eth1", "eth4", "eth5" { type pointopoint; };</cf> - start the protocol
+ on enumerated interfaces with <cf>type pointopoint</cf> option.
+
+ <cf>interface -192.168.1.0/24, 192.168.0.0/16;</cf> - start the protocol on all
+ interfaces that have address from 192.168.0.0/16, but not
+ from 192.168.1.0/24.
+
+ <cf>interface -192.168.1.0/24, 192.168.0.0/16;</cf> - start the protocol on all
+ interfaces that have address from 192.168.0.0/16, but not
+ from 192.168.1.0/24.
+
+ <cf>interface "eth*" 192.168.1.0/24;</cf> - start the protocol on all
+ ethernet interfaces that have address from 192.168.1.0/24.
+
+ <tag><label id="dsc-pass">password "<m/password/" [ { id <m/num/; generate from <m/time/; generate to <m/time/; accept from <m/time/; accept to <m/time/; } ]</tag>
+ Specifies a password that can be used by the protocol. Password option can
+ be used more times to specify more passwords. If more passwords are
+ specified, it is a protocol-dependent decision which one is really
+ used. Specifying passwords does not mean that authentication is
+ enabled, authentication can be enabled by separate, protocol-dependent
+ <cf/authentication/ option.
+
+ This option is allowed in OSPF and RIP protocols. BGP has also
+ <cf/password/ option, but it is slightly different and described
+ separately.
+
+ Default: none.
+</descrip>
+
+<p>Password option can contain section with some (not necessary all) password sub-options:
+
+<descrip>
+ <tag>id <M>num</M></tag>
+ ID of the password, (0-255). If it's not used, BIRD will choose
+ ID based on an order of the password item in the interface. For
+ example, second password item in one interface will have default
+ ID 2. ID is used by some routing protocols to identify which
+ password was used to authenticate protocol packets.
+
+ <tag>generate from "<m/time/"</tag>
+ The start time of the usage of the password for packet signing.
+ The format of <cf><m/time/</cf> is <tt>dd-mm-yyyy HH:MM:SS</tt>.
+
+ <tag>generate to "<m/time/"</tag>
+ The last time of the usage of the password for packet signing.
+
+ <tag>accept from "<m/time/"</tag>
+ The start time of the usage of the password for packet verification.
+ <tag>accept to "<m/time/"</tag>
+ The last time of the usage of the password for packet verification.
</descrip>
<chapt>Remote control
@@ -327,6 +397,9 @@ codes along with the messages. You do not necessarily need to use <file/birdc/ t
own applications could do that, too -- the format of communication between
BIRD and <file/birdc/ is stable (see the programmer's documentation).
+Many commands have the <m/name/ of the protocol instance as an argument.
+This argument can be omitted if there exists only a single instance.
+
<p>Here is a brief list of supported functions:
<descrip>
@@ -339,12 +412,23 @@ BIRD and <file/birdc/ is stable (see the programmer's documentation).
<tag>show protocols [all]</tag>
Show list of protocol instances along with tables they are connected to and protocol status, possibly giving verbose information, if <cf/all/ is specified.
- <tag>show ospf [interface|neighbors] [<m/name/] ["<m/interface/"]</tag>
- Show detailed information about OSPF protocol, possibly giving a verbose list of interfaces and neighbors. The <m/name/ of the protocol instance can be omitted if there exists only a single instance.
+ <tag>show ospf interface [<m/name/] ["<m/interface/"]</tag>
+ Show detailed information about OSPF interfaces.
+
+ <tag>show ospf neighbors [<m/name/] ["<m/interface/"]</tag>
+ Show a list of OSPF neighbors and a state of adjacency to them.
+
+ <tag>show ospf state [<m/name/]</tag>
+ Show detailed information about OSPF areas based on a content of link-state database.
+ It shows network topology, aggregated networks and routers from other areas and external routes.
+
+ <tag>show ospf topology [<m/name/]</tag>
+ Show a topology of OSPF areas based on a content of link-state database.
+ It is just a stripped-down version of 'show ospf state'.
<tag>show static [<m/name/]</tag>
- Show detailed information about static routes. The <m/name/ of the protocol instance can be omitted if there exists only a single instance.
-
+ Show detailed information about static routes.
+
<tag>show interfaces [summary]</tag>
Show the list of interfaces. For each interface, print its type, state, MTU and addresses assigned.
@@ -367,7 +451,7 @@ BIRD and <file/birdc/ is stable (see the programmer's documentation).
a given filter (<cf>filter <m/name/</cf> or <cf>filter { <m/filter/ }
</cf> or matching a given condition (<cf>where <m/condition/</cf>).
The <cf/import/ and <cf/preimport/ switches ask for printing of entries
- that are imported to the specified protocol. With <cf/preimport/, the
+ that are imported to the specified protocol. With <cf/preimport/, the
import filter of the protocol is skipped.
<p>The <cf/stats/ switch requests showing of route statistics (the
@@ -1172,6 +1256,7 @@ protocol ospf &lt;name&gt; {
<tag>interface <M>pattern</M></tag>
Defines that the specified interfaces belong to the area being defined.
+ See <ref id="dsc-iface" name="interface"> common option for detailed description.
<tag>virtual link <M>id</M></tag>
Virtual link to router with the router id. Virtual link acts as a
@@ -1257,24 +1342,7 @@ protocol ospf &lt;name&gt; {
<tag>password "<M>text</M>"</tag>
An 8-byte or 16-byte password used for authentication.
-
- <tag>id <M>num</M></tag>
- ID of the password, (0-255). If it's not used, BIRD will choose
- ID based on an order of the password item in the interface. For
- example, second password item in one interface will have default
- ID 2.
-
- <tag>generate from <M>date</M></tag>
- The start time of the usage of the password for packet signing.
-
- <tag>generate to <M>date</M></tag>
- The last time of the usage of the password for packet signing.
-
- <tag>accept from <M>date</M></tag>
- The start time of the usage of the password for packet verification.
-
- <tag>accept to <M>date</M></tag>
- The last time of the usage of the password for packet verification.
+ See <ref id="dsc-pass" name="password"> common option for detailed description.
<tag>neighbors { <m/set/ } </tag>
A set of neighbors to which Hello messages on nonbroadcast networks
@@ -1310,7 +1378,7 @@ protocol ospf MyOSPF {
accept;
}
reject;
- };
+ };
area 0.0.0.0 {
interface "eth*" {
cost 11;
@@ -1323,17 +1391,15 @@ protocol ospf MyOSPF {
interface "ppp*" {
cost 100;
authentication cryptographic;
- passwords {
- password "abc" {
- id 1;
- generate to "22-04-2003 11:00:06";
- accept from "17-01-2001 12:01:05";
- };
- password "def" {
- id 2;
- generate to "22-07-2005 17:03:21";
- accept from "22-02-2001 11:34:06";
- };
+ password "abc" {
+ id 1;
+ generate to "22-04-2003 11:00:06";
+ accept from "17-01-2001 12:01:05";
+ };
+ password "def" {
+ id 2;
+ generate to "22-07-2005 17:03:21";
+ accept from "22-02-2001 11:34:06";
};
};
interface "arc0" {
@@ -1497,7 +1563,7 @@ because there are no good implementations of OSPFv3.
<tag/authentication none|plaintext|md5/ selects authentication method to be used. <cf/none/ means that
packets are not authenticated at all, <cf/plaintext/ means that a plaintext password is embedded
into each packet, and <cf/md5/ means that packets are authenticated using a MD5 cryptographic
- hash. If you set authentication to not-none, it is a good idea to add <cf>passwords { }</cf>
+ hash. If you set authentication to not-none, it is a good idea to add <cf>password</cf>
section. Default: none.
<tag>honor always|neighbor|never </tag>specifies when should requests for dumping routing table
@@ -1562,8 +1628,8 @@ protocol rip MyRIP_test {
port 1520;
period 10;
garbage time 60;
- interface "eth0" { metric 3; mode multicast; }
- "eth1" { metric 2; mode broadcast; };
+ interface "eth0" { metric 3; mode multicast; };
+ interface "eth*" { metric 2; mode broadcast; };
honor neighbor;
authentication none;
import filter { print "importing"; accept; };